• The Journal of Advanced Prosthodontics
• /
• v.11 no.3
• /
• pp.179-186
• /
• 2019

PURPOSE. The purpose of this study was to compare two novel impression methods and a conventional impression method for edentulous jaws using 3-dimensional (3D) analysis software. MATERIALS AND METHODS. Five edentulous patients (four men and one woman; mean age: 62.7 years) were included. Three impression techniques were used: conventional impression method (CI; control), simple modified closed-mouth impression method with a novel tray (SI), and digital impression method using an intraoral scanner (DI). Subsequently, a gypsum model was made, scanned, and superimposed using 3D analysis software. Mean area displacement was measured using CI method to evaluate differences in the impression surfaces as compared to those values obtained using SI and DI methods. The values were confirmed at two to five areas to determine the differences. CI and SI were compared at all areas, while CI and DI were compared at the supporting areas. Kruskal-Wallis test was performed for all data. Statistical significance was considered at P value <.05. RESULTS. In the comparison of the CI and SI methods, the greatest difference was observed in the mandibular vestibule without statistical significance (P>.05); the difference was < 0.14 mm in the maxilla. The difference in the edentulous supporting areas between the CI and DI methods was not significant (P>.05). CONCLUSION. The CI, SI, and DI methods were effective in making impressions of the supporting areas in edentulous patients. The SI method showed clinically applicability.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.315-325
• /
• 2019

The study attempted to examine the structural model of the effects of health status and retirement aging anxiety on middle-aged workers. The subjects were collected from 263 40-59 year old middle-aged workers who work at three institutions in C and G cities. Results First, the variables affecting aging anxiety were aging preparation and health status, and these variables accounted for 52% of aging anxiety. Second, health status had a significant effect on retirement preparedness, and there was a significant indirect effect on aging anxiety through retirement preparedness. There was a partial control effect due to the difference in the path coefficient between health status and aging anxiety in the multi-group moderating effect of 40~49 and 50~59 years. Therefore, in order to reduce aging anxiety, it is important to find ways to prepare for various retirement, and a systematic management system is necessary.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.443-447
• /
• 2022

The purpose of this study attempted to investigate academic achievement and cooperative ability as problem-based learning to strengthen communication in Spanish courses. 70 learners taking Spanish at A University from September to December, 2021 were divided into an experimental and a control class to examine their academic achievement and cooperate ability. Academic achievement was not statistically significant, but the sub-area of communication was significant as 0.031 (*p<.05) and the cooperative ability of the experimental group, the average was increased, but it was not statistically significant. Based on this study, continuous follow-up research to develop teaching methods and teaching and learning models suitable for strengthening Spanish communication through various learner-centered convergence teaching methods will contribute to fostering talent desired by the 21st century.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.415-424
• /
• 2021

The purpose of the current study is to to examine the psychometric properties of the Subjective Agingwell Scale (SAS). Three hundred and forty two elders completed the SAS and the scales assessing subjective well-being, optimism, perceived control and adhering to healthy behavior. The 11-item SAS that displays good internal reliability and good fit to the three-factor model consisting of cognitive satisfaction, positive affect, and spiritual fullness. Correlational analyses with measures of subjective agingwell, subjective well-being, and optimism provide evidence for construct validity. Moreover, the results from hierarchical regression analyses show criterion-related validity of the SAS. This scale could be used in the field to measure and promote subjective agingwell.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.2
• /
• pp.72-79
• /
• 2023

PURPOSE. The purpose of this in vitro study was to compare the accuracy of various 3D printers and a milling machine. MATERIALS AND METHODS. The die model was designed using CAD (Autodesk Inventor 2018 sp3). The 30 ㎛ cement space was given to the die and the ideal crown of the mandibular left first molar was designed using CAD (ExoCAD). The crowns were produced using the milling machine (Imes-icore 250i) and the 3D printers (Zenith U, Zenith D, W11) and they were divided into four groups. In all groups, the interior of each crown was scanned (Identica blue) and superimposed (Geomagic Control X) with the previously designed die. The difference between the die and the actual crown was measured at specific points. The Kruskal-Wallis test, the Mann-Whitney test, and Bonferroni's method were performed with a statistical analysis software (P < .008 in inter-group comparison P < .001 in intra-group comparison). RESULTS. In all groups, the center of the occlusal area and the anti-rotational dimple area showed significantly greater difference and the marginal area showed the smallest difference comparatively. The mean value of the difference in each area and the sum of the differences were higher in order of W11, Imes-icore 250i, Zenith D, and Zenith U. CONCLUSION. The digital light processing (DLP) method shows higher accuracy compared to the sereolithography (SLA) method using the same resin material.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.292-294
• /
• 2021

The digital twin-based smart pipe integrated management system is an integrated solution for efficient operation and monitoring that we propose. We buried a waterway pipe underground with self-diagnostic and condition monitoring sensor functions. This pipe sends sensing data and accumulates it. Our system analyzes data to make smart decisions. The main functions of this system are remote control and monitoring. Therefore, "how to configure monitoring in real time" is a big issue. For this purpose, we designed a special real-time-based agent function. In this paper, to solve this problem, a layered architecture was proposed based on transmission points where sensor data are exchanged. An agent was placed in each layer to look at the lower layer and periodically monitor whether there were any changes in the sensor in real time. Finally, the agent system was designed and the conceptual model level was implemented to verify excellence.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.1-10
• /
• 2023

The nuclear power plant(NPP)'s Instrumentation and Control(I&C) system periodically conducts integrity checks for the maintenance of self-diagnostic function during normal operation. Additionally, it performs functionality and performance checks during planned preventive maintenance periods. However, there is a need for technological development to diagnose failures and prevent accidents in advance. In this paper, we studied methods for estimating the reliability function by utilizing environmental data and self-diagnostic data of the I&C equipment. To obtain failure data, we assumed probability distributions for component features of the I&C equipment and generated virtual failure data. Using this failure data, we estimated the reliability function using representative artificial intelligence(AI) models used in survival analysis(DeepSurve, DeepHit). And we also estimated the reliability function through the Cox regression model of the traditional semi-parametric method. We confirmed the feasibility through the residual lifetime calculations based on environmental and diagnostic data.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.216-225
• /
• 2011

Following the proliferation of three-dimensional video contents and displays, many terrestrial broadcasting companies have been preparing for stereoscopic 3DTV service. In terrestrial stereoscopic broadcast, it is a difficult task to code and transmit two video sequences while sustaining as high quality as 2DTV broadcast due to the limited bandwidth defined by the existing digital TV standards such as ATSC. Thus, a terrestrial 3DTV broadcasting with a heterogeneous video codec system, where the left image and right images are based on MPEG-2 and H.264/AVC, respectively, is considered in order to achieve both high quality broadcasting service and compatibility for the existing 2DTV viewers. Without significant change in the current terrestrial broadcasting systems, we propose a joint rate control scheme for stereoscopic 3DTV service based on the heterogeneous dual codec systems. The proposed joint rate control scheme applies to the MPEG-2 encoder a quadratic rate-quantization model which is adopted in the H.264/AVC. Then the controller is designed for the sum of the left and right bitstreams to meet the bandwidth requirement of broadcasting standards while the sum of image distortions is minimized by adjusting quantization parameter obtained from the proposed optimization scheme. Besides, we consider a condition on maintaining quality difference between the left and right images around a desired level in the optimization in order to mitigate negative effects on human visual system. Experimental results demonstrate that the proposed bit rate control scheme outperforms the rate control method where each video coding standard uses its own bit rate control algorithm independently in terms of the increase in PSNR by 2.02%, the decrease in the average absolute quality difference by 77.6% and the reduction in the variance of the quality difference by 74.38%.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.537-544
• /
• 2007

A home network is a residential local area network in which digital home appliances are connected with each other. Applying the mobile agent technology to the home network is expected to provide a new computing model. In particular, mobility and asynchronous ability of mobile agent can be used to reduce network traffic generated for managing home appliances. However, in order to apply the mobile agent concept to the home network, access control for mobile agents is necessary. In the existing home network system, there is one special server, sometimes called home server This server generally has mapping tables to be updated periodically, which describes access control lists between users' authorities and corresponding devices. In this paper, we propose a role-based access control framework with mobile agents in home networks. This framework, called Secure KAgent framework, is designed and implemented based on KAgent system. It has two main characteristics: to control access permissions based on Role-Based Access Control(RBAC) scheme and to safety assign roles to mobile agents by role tickets.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.249-255
• /
• 2011

The free-stereo mosaics image without GPS/INS and ground control data can be generated by using relative orientation parameters on the 3D model coordinate system. Its origin is located in one reference frame image. A 3D coordinate calculated by conjugate points on the free-stereo mosaic images is represented on the 3D model coordinate system. For determining 3D coordinate on the 3D absolute coordinate system utilizing conjugate points on the free-stereo mosaic images, transformation methodology is required for transforming 3D model coordinate into 3D absolute coordinate. Generally, the 3D similarity transformation is used for transforming each other 3D coordinates. Error of 3D model coordinates used in the free-stereo mosaic images is non-linearly increased according to distance from 3D model coordinate and origin point. For this reason, 3D model coordinates used in the free-stereo mosaic images are difficult to transform into 3D absolute coordinates by using linear transformation. Therefore, methodology for transforming nonlinear 3D model coordinate into 3D absolute coordinate is needed. Also methodology for resampling the free-stereo mosaic image to the geo-stereo mosaic image is needed for overlapping digital map on absolute coordinate and stereo mosaic images. In this paper, we propose a 3D non-linear transformation for converting 3D model coordinate in the free-stereo mosaic image to 3D absolute coordinate, and a 2D non-linear transformation based on 3D non-linear transformation converting the free-stereo mosaic image to the geo-stereo mosaic image.