• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.893-906
• /
• 2020

This paper reports on the analysis of the location accuracy of a precision image generation system manufactured for CAS 500. The planned launch date of the CAS 500 is 2021, and since it has not yet been launched, the analysis was performed using KOMPSAT-3A satellite images having similar specifications to the CAS 500. In this paper, we have checked the geolocation accuracy of initial sensor model, the model point geolocation accuracy of the precise sensor model, the geolocation accuracy of the precise sensor model using the check point, and the geolocation accuracy of the precise orthoimage using 30 images of the Korean Peninsula. In this study, the target geolocation accuracy is to have an RMSE within 2 pixels when an accurate ground control point is secured. As a result, it was confirmed that the geolocation accuracy of the precision sensor model using the checkpoint was about 1.85 pixels in South Korea and about 2.04 pixels in North Korea, and the geolocation accuracy of the precise orthoimage was about 1.15 m in South Korea and about 3.23 m in North Korea. Overall, it was confirmed that the accuracy of North Korea was low compared to that of South Korea, and this was confirmed to have affected the measured accuracy because the GCP (Ground Control Point) quality of the North Korea images was poor compared to that of South Korea. In addition, it was confirmed that the accuracy of the precision orthoimage was slightly lower than that of precision sensor medel, especially in North Korea. It was judged that this occurred from the error of the DTM (Digital Terrain Model) used for orthogonal correction. In addition to the causes suggested by this paper, additional studies should be conducted on factors that may affect the position accuracy.

• Journal of Radiation Protection and Research
• /
• v.35 no.1
• /
• pp.34-42
• /
• 2010

With the expanded use of radiation in modern medical practices, the most important issue in regards to efforts to reduce individual exposure dose is quality assurance. Therefore in order to study the present condition of quality assurance, the Gwangju Metropolitan City area was divided into five districts each containing ten hospitals. Four experiments were conducted: a reproducibility experiment for kVp, mA, and examination time (sec) intensity of illumination; half-value layer (HVL) measurement; and beam perpendicularity test matching experiment. The tube voltage reproducibility experiment for all fifty hospitals resulted in a 95.33% passing rate and mA and examination time both resulted in a 77.0% passing rate. The passing rate for intensity of illumination was 86.0% and 52.0% for HVL, which was the lowest passing rate of all four factors. For the beam perpendicularity test matching experiment, generally the central flux is matched to within $1.5^{\circ}$. Of all fifty hospitals 30.0% were beyond $3^{\circ}$. The results of the survey showed that 58% responded that they knew about quality assurance cycle. All fifty respondents stated that they have not received any training in regards to quality assurance at their current place of employment. Although quality assurance is making relative progress, the most urgent issue is awareness of the importance of quality assurance. Therefore, the implementation of professional training focusing on safety management and accurate quality assurance of radiation will reduce the exposure to radiation for radiologists and patients and higher quality imaging using less dosage will also be possible.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.449-467
• /
• 2013

Contemporary 21st century, the rapid development of technology has achieved due to the emergence of various digital devices, a variety of media to the diversification of the limits of visual representation is reduced. Therefore, the combination of technology and art, visual arts, giving limits of getting it free to the public will feel fresh new visual impact. Such a new approach to light of a combination of technology and art, a variety of fine art and motion picture of the visual arts, such as has been recognized as a new genre. Of the resolution of the projector by utilizing the current reality and unreality beyond the boundaries of the building or structure in the city, as a schematic design of the screen projected structure and mapping of the art technology in an attempt to integrate recent has been studied in various ways. The projected structure design and the mapping of the art technology in an attempt to incorporate recent research has been diverse. In this study, as a new technology of a projection mapping to study the technique of looking for the definition of mapping practices to maximize the effectiveness of Visual Perception 3D animation was applied to a case study. A combination of 3D animation and project mapping in the future the fusion of art and technology to meet the zeitgeist with new possibilities of visual art to create synergies that is expected.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.104-113
• /
• 2012

Followed by that HTML5(Hypertext Markup Language5) was introduced, many kinds of program and services based on this have been developed and released. HTML5 is technical standard specifications for cross platform for personal computers and mobile devices so that it is expected that continuing progress and wide application in the both sides of the academic and the industrial fields increase. This study is to design and implement a mobile application program for overlay rendering with DEM and other geo-based image sets using HTML5 WebGL for 3D graphic processing on web environment. Particularly, the blending technique was used for overlay processing with multiple images. Among available WebGL frameworks, CubicVR.js was adopted, and various blending techniques were provided in the user interface for general users. For the actual application in the study area around the Sejong city, serveral types of geo-based data sets were used and processed: KOMPSAT-2 images, ALOS PALSAR SAR images, and grid data by environment measurements. While, DEM for 3D viewing with these geo-based images was produced using contour information of the digital map sets. This work demonstrates possibilities that new types of contents and service system using geo-based images can be extracted and applied.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.76-91
• /
• 2016

The purpose of this study is to analyze the effects of spatial characteristics, such as land cover and topography, on heat wave days from the city of Milyang, which has recently drawn attention for its heat wave problems. The number of heat wave days was calculated utilizing RCP-based South Korea climate data from 2000 to 2010. Land cover types were reclassified into urban area, agricultural area, forest area, water, and grassland using 2000, 2005, and 2010 land cover data constructed by the Ministry of Environment. Topographical features were analyzed by topographic position index (TPI) using a digital elevation model (DEM) with 30 m spatial resolution. The results show that the number of heat wave days was 31.4 days in 2000, which was the highest, followed by 26.9 days in 2008, 24.2 days in 2001, and 24.0 days in 2010. The heat wave distribution was relatively higher in agricultural areas, valleys, and rural areas. The topography of Milyang contains more mountainous slope (51.6%) than flat (19.7%), while large-scale valleys (12.2%) are distributed across some of the western region. Correlation analysis between heat wave and spatial characteristics showed that the correlation between forest area land cover and number of heat wave days was negative (-0.109), indicating that heat wave can be mitigated. Topographically, flat areas and heat wave showed a positive correlation (0.305). These results provide important insights for urban planning and environmental management for understanding the impact of land development and topographic change on heat wave.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.579-586
• /
• 2019

The national base map of Korea has become more useful as the spatial information industry has developed rapidly. Beyond the simple application of the past paper map era, the role as important spatial information in the smart city and digital twin era is required with the IT (Information Technology) revolution. Therefore, the concepts of seamless, multi scale, object-oriented, customized production and real-time updating have emerged, and innovations in the distribution process through the internet are also taking place. Although the concept and definition in the law that is corresponds to the status of the national base map must be supported, the concept and definition of the paper map introduced from the surveying law in 1980 still exist. The definition of the national base map cannot meet current technological developments and social needs and does not reflect the perceptions of the majority of the people as well as the practical capacity of government organizations that manage it. Therefore, it is necessary to establish the concept of national base map in accordance with the current situation and to define it in the law. In this study, the concept of national base map was established and defined by comprehensive analysis of the development process of the national base map, the changes in the times and cases of the United States, the United Kingdom and Japan.

• The Journal of Korean Academy of Sensory Integration
• /
• v.9 no.2
• /
• pp.15-28
• /
• 2011

Objective : The purpose of the study was to investigate effects of sensory integration therapy on self-regulation capacities of children with cerebral palsy. Methods : Subjects of this study were four years old girl and six years old boy, living in P city. Both were diagnosed as diplegia. Research design used in this study is ABA' design for a single-subject research. The experimental period was 12 weeks with 22 sessions of treatment. It was divided into three phase: 6 sessions for baseline phase (A), 14 sessions for treatment phase (B), 2 sessions for baseline phase (A'). There was no treatment on the baseline phases, and sensory integration therapy focused vestibular and proprioceptive stimuli was conducted on the treatment phase. At each session, subjects' behaviors has been recorded with a Digital Camera for 10 minutes and then the occurrence frequency of problematic behavior was identified based on the operational definition of it. Results : In comparison with the baseline phase (A), the occurrence frequency was reduced during the treatment phase for three types of problematic behavior associated with the self-regulatory capacities. The tendency of reducement was maintained during baseline phase (A'). Conclusion : Based on the result, it was implied that sensory integration therapy has a positive effect on the self-regulation capacities in children with cerebral palsy.

• Economic and Environmental Geology
• /
• v.48 no.3
• /
• pp.205-212
• /
• 2015

We have verified applicability of UAV(Unmanned Aerial Vehicle) photogrammetry to a mining engineering. The test mine is a smectite mine located at Gyeongju city in Gyeongnam province, Koera. 448 photos over area of $600m{\times}380m$ were taken with overlapped manner using Cannon Mark VI equipped to multicopter DJI S1000, which were processed with AgiSoft Photoscan software to generate orthophoto and DEM model of the study area. photogrammetry data with 10 cm resolution were generated using 6 ground control positions, which were exported to the 3D geological modeling software to make a topographic surface object. Monitoring of amount of ore production and landsliding could be done with less than 1 hours photographing as well as low cost. A direct link between UAV photogrammetry and 3D geological modeling technology might increase productivity of a mine due to appling the topographical surface change immediately according to the mining operation.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.55-68
• /
• 1999

Many ITS services require map databases in digital form to meet desired needs. Due to the dynamic nature of ITS and the sheer diversity of applications, the design and development of spatial databases to meet those needs pose a major challenge to both the public and private sectors. This challenge is further complicated by the necessity to transfer locationally referenced information between different kinds of databases and spatial data handling systems so that ITS products will work seamlessly across the region and nation. The Purpose of this paper is to develop the framework-models commonly to reference locations in the various applications and systems-the ITS Map Datum and LRS(Location Referencing System). The ITS Map Datum consists of the around control points which are the prime intersections (nodes) of the nationwide road network In this study, the major points have been determined along wish link-node modeling procedure. LRS, defined as a system for determining the position (location) of an entity relative to other entities or to some external frame of reference, has also been set up using CSOM type method. The method has been implemented using ArcView GIS software over the Kangnam and Seocho districts in the city of Seoul, showing that the implemented LRS scheme can be used successfully elsewhere. With the proper advent of the K.ITS architecture and services, the procedure can be used to improve the data sharing and to inter operate among systems, enhancing the efficiency both in terms of money and time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1164-1172
• /
• 2012

This study aims to make a "farmland use map" using high-resolution images and to analyze the land use change for about 8 years in Goyang, Namyangju, and Yongin cities. We have made a new numerical map named as a farmland use map using high-resolution images taken mostly in 2007 and digital topographical maps in Goyang, Namyangju, and Yongin cities near metropolitan areas to classify farmland use of paddy, upland, plastic film house, and orchard. We also made a land use map by overlaying the farmland use map and the land registration map of each city made in 2007, and compared the land use map made by RDA (Rural Development Administration) in 1999. Paddy areas decreased at a range of 3,000 to 5,000 ha during 8 years and were changed to residential areas in the cities. Upland and orchard areas also showed similar tendency and were changed to residential areas as well. On the other hand, the areas of the plastic film houses in the cities showed an increase or same in size. It is suggested that farmland use map can be broadly used as a base map for various survey projects including soil survey, statistics, and farmland information management.