• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.21-31
• /
• 2010

A manufacturing execution system in the process according to automation system of installation management has been growing interest about effective system design and effective system manage. In this paper, we propose an ubiquitous Manufacturing Execution System based on RFID/USN for checkup monitoring and history management of installation in manufacturing execution systems. For this, we design and implement installation history and statistics management system based on RFID grafting RFID for efficient installation equipment history and statistics management of ubiquitous Manufacturing Execution System, and was implemented checkup monitoring system based on USN using temperature sensor, humidity sensor, hydraulic pressure sensor for failure prevention of ubiquitous Manufacturing Execution System. And proposed ubiquitous Manufacturing Execution System is implemented based on JSP for access through Web in real time.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.155-161
• /
• 2005

Governors control the revolution speed of heat engines such as diesel engines, steam turbines and gas turbines. Precise and prompt tests for the control performances of governors are essential both in governors' manufacturing processes and in governors' maintenance processes. In the conventional governor test systems controlled by analog type electronic controllers, the incorporation of heat engine's dynamics to the test system have been considered very difficult to realize. This study suggests a new governor test system controlled by a digital controller using a personal computer. The application of the digital controller to the test system instead of the analog type electronic controller have brought about the following advancements; (1) heat engine's dynamics could be implemented easily in the test system, (2) automatic test data acquisition both in steady state and in transient state enables us to save test time and to enhance the reliability of the tests.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.3
• /
• pp.343-348
• /
• 2007

This paper presents an adaptive controller for the compensation of state-dependent disturbance with unknown amplitude in a digital servo motor system. The state-dependent disturbance is caused by friction and eccentricity between the wheel axis and the motor driver of a mobile robot servo system. The proposed control scheme guarantees an asymptotical stability for both the velocity and position regulation. An experimental result shows the effectiveness of the adaptive disturbance compensator for wheeled-mobile robot in a low velocity diffusion tracking. A comparative experimental study with a simple PI controller is presented.

• Journal of the Korean Society for information Management
• /
• v.9 no.1
• /
• pp.131-164
• /
• 1992

In this study. a technical report management system using optical technology is described in detail. This management system is designed for both bibliographic (character) and full-text (image) information. Several optical filing systems already on the Korean market are scrutinized and compared with standard functions in order to build a more efficient management system for technical reports which can be easily integrated into existing KRISS library automation system. For that purpose, up-to-date technologies (i.e., digital image PI-ocessing (DIP), MARC standards, and optical character recognition (OCR), etc.) are applied to this system.

• Journal of Internet Computing and Services
• /
• v.20 no.1
• /
• pp.125-133
• /
• 2019

Company A should maintain myriad conversion tools for the purpose of making a geometric compilation of navigation maps. Company A is already using complex compilation tools, which are tailored to geographical areas and various GPS models. However, due to frequent requirement and personnel changes, there is an endless challenge for perfect tool configuration and multiple map consolidation. To solve this problem, Company A launched a process automation project using Graphviz, which is an open source workflow graph visualization software. Before implementation, they had to document their current map compilation processes and then match it with the applicable conversion tool. For effective representation of process controls, a new graphical process notation is designed, i.e. Y Block diagram. The authors will compare Y Block diagram with other process notations and explain why Y Block diagram is more useful for tool based business processes such as digital map generation processes.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.229-235
• /
• 2022

This study aims to substantiate an interdisciplinary methodology for automated analysis and qualitative assessment of legislation and court decisions. The development of this kind of methodology will make it possible to fill a number of methodological gaps in various research areas, including law effectiveness assessment and legal monitoring. We have defined a methodology based on the interdisciplinary principles and tools. In general, it should be noted that even at the level of qualitative assessment made with the use of the methodology described above, the accumulation of knowledge about the relationship between legal objectives, indicators and computer methods of their identification can reduce the role of expert knowledge and subjective factor in the process of assessment, planning, forecasting and control over the state of legislation and law enforcement. Automation of intellectual processes becomes inevitable in a digital society, but, releasing experts from routine work, simultaneously reorients it to development of interdisciplinary methods and control over their application.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.687-696
• /
• 2023

In recent construction sites, digital maps obtained through drone photogrammetry have garnered increasing attention as indispensable tools for effective construction site management. the strategic placement of Ground Control Points (GCPs) is crucial in drone photogrammetry. Nevertheless, the manual labor and time-intensive nature of GCP surveying pose significant challenges. The purpose of this study is to design the concept of automated GCPs survey technology for enhancing drone photogrammetry efficiency in construction sites. As a result, the productivity of the automated method was analyzed as 118,894.7㎡/hr. It is over 25% productivity improvement compared to traditional methods. In future studies, economic analysis of automated methods should be studied.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.1
• /
• pp.30-38
• /
• 1989

Since the nuclear power plants in Korea have been operated in 1979, the nondestructive testing (NDT) of pressure vessels and/or piping welds plays an important role for maintaining the safety and integrity of the plants. Ultrasonic method is superior to the other NDT method in the viewpoint of the detectability of small flaw and accuracy to determine the locations, sizes, orientations, and shapes. As the service time of the nuclear power plants is increased, the radiation level from the components is getting higher. In order to get more quantitative and reliable results and secure the inspector from the exposure to high radiation level, automation of the ultrasonic equipments has been one of the important research and development(R & D) subject. In this research, it was attempted to visualize the shape of flaws presented inside the specimen using a Modified C-Scan technique. In order to develope Modified C-Scan technique, an automatic ultrasonic scanner and a module to control the scanner were designed and fabricated. IBM-PC/XT was interfaced to the module to control the scanner. Analog signals from the SONIC MARK II were digitized by Analog-Digital Converter(ADC 0800) for Modified C-Scan display. A computer program has been developed and has capability of automatic data acquisition and processing from the digital data, which consist of maximum amplitudes in each gate range and locations. The data from Modified C-Scan results was compared with shape from artificial defects using the developed system. Focal length of focused transducer was measured. The automatic ultrasonic equipment developed through this study is essential for more accurate, reliable, and repeatable ultrasonic experiments. If the scanner are modified to meet to appropriate purposes, it can be applied to automation of ultrasonic examination of nuclear power plants and helpful to the research on ultrasonic characterization of the materials.

• Journal of Digital Contents Society
• /
• v.18 no.6
• /
• pp.1175-1182
• /
• 2017

Recent trend in the manufacturing industry is focused on the convergence with IoT and Big Data, by emergence of the 4th Industrial Revolution. To realize a smart factory, the proposed system based on MTConnect technology collects and integrates various status information of machines from many production facilities including heterogeneous devices. Also it can distribute the acquisited status of heterogeneous manufacturing machines to the remote devices. As a key technology of a flexible automated production line, the proposed system can provide much possibility to manage important information such as error detection and processing state management in the unmanned automation line.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1376-1384
• /
• 2008

Numerous researches on network self-configuration have been conducted on Wireless Sensor Network (WSN) and Ad Hoc network but the results have not been applied yet for factory automation. This paper presents development of intelligent process management systems conducting process monitoring and control irrelevant to physical position of a plant operator. The systems are indispensable for diagnosis of rotating machines which cannot exploit wired network. The system was implemented in a Personal Digital Assistant (PDA) using Bluetooth communication protocol. When a mobile terminal reaches to communication range of the process management server, the server detects the mobile terminal to reconfigure plant network automatically. The server authenticates a user of the terminal to download and installs monitoring and control program considering authorized level of the user. If the terminal leaves communication range of the server, it deletes the node from the network and removes the program automatically to save resources and prevent security problems such as missing terminal. Operation of developed functions was verified in a testbed emulating steel-making plant.