• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.4
• /
• pp.274-284
• /
• 2000

In this paper, the design methodology of digital fuzzy controller(DFC) for the systems with time-delay is presented and the qualitative effects of the quantizers in digital implementation of a fuzzy controllers are investigated. We propose the fuzzy feed-back controller whose output is delayed with unit sampling period and period and predicted. the analysis and the design problem considering time-delay become very easy because the proposed controller is syncronized with the sampling time. The stabilization problem of the digital fuzzy system with time-delay is solved by linear matrix inequality(LMI) theory. Furthermore, we analyze the stability of the quantized fuzzy system. Our results prove that when quantization os taken into account, one only has convergence to some small neighborhood about origin. We develop a fuzzy control system for backing up a computer-simulated truck-trailer with the consideration of time-delay and quantization effect. By using the proposed method, we analyze the quantization effect to the system and design a DFC which guarantees the stability of the control system in the presence of time-delay.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.323-332
• /
• 2012

An airborne LiDAR system performs several observations on flight routes to collect data of targeted regions accompanying with discrepancies between the collected data strips of adjacent routes. This paper aims to present an automatic error correction technique using modified ICP as a way to remove relative errors from the observed data of strip data between flight routes and to make absolute correction to the control data. A control point data from the existing digital topographic map were created and the modified ICP algorithm was applied to perform the absolute automated correction on the relatively adjusted airborne LiDAR data. Through such process we were able to improve the absolute accuracy between strips within the average point distance of airborne LiDAR data and verified the possibility of automation in the geometric corrections using a large scale digital map.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.337-341
• /
• 1991

Fieldbus is a low level serial digital network which will be used for factory automation. This paper describes lower layer implementation of a Fieldbus network interface. Physical layer provides hardware interface between IBM-PC and Fieldbus. Also, physical layer uses manchester coding, shielded twisted pair lines and RS-485 electrical standard. Data link layer includes Intel's iDCX96 real time executive for 8797 one chip microcontroller and Fieldbus data link protocol software.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1800-1805
• /
• 2006

유비쿼터스(Ubiquitous)시대의 도래로 디지털 라이프(Digital Life) 실현을 위한 디지털 생활환경기술 개발에 심혈을 기울이고 있는 상황이다. 본 연구에서는 CDMA 이동통신망을 통해 사용자가 언제 어디서나 댁내 상황을 영상, 음성 또는 데이터를 통해 확인하거나 제어할 수 있는 모바일 기반의 디지털 홈오토메이션 기술을 개발하고자 한다. 음성과 영상을 동시에 전송하고, 실시간으로 집안의 기기에 대한 제어 및 상태정보를 주고받을 수 있게 하며, 일정량 이상의 데이터를 수신 받으면서 집안의 기기를 제어하는 등의 서비스에 초점을 맞추어 개발하였다.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.515-519
• /
• 2003

This paper proposes a new image sequence stabilization (ISS) scheme based on filtering of absolute frame positions. The proposed ISS scheme removes undesired motion effects in real-time, while preserving desired gross camera displacements. The well-known finite impulse response (FIR) filter is adopted for filtering. The proposed ISS scheme provides a filtered position and velocity with fine inherent properties. It is demonstrated that the filtered position is not affected by the constant velocity. It is also shown that the filtered velocity is separated from the position. Via numerical simulations, the performance of the proposed scheme is shown to be superior to the existing Kalman filtering scheme.

• Journal of KIBIM
• /
• v.9 no.4
• /
• pp.51-61
• /
• 2019

In the general manufacturing sector, prototyping used to reduce the risks that can arise with new conceptual products. However, in AEC area, it does not mass-produce a building, so the prototype itself becomes a building. Therefore, it is challenging to have prototyping of the same scale as the real thing, and the prototyping process in architecture is very inefficient. The prototyping process in the design stage typically assumes making a scaled model, partial model, or digital model. However, it is difficult for these models to correspond to the actual building and the environment of time and space such as scale, material, environment, load, physical properties and deformation, corrosion, etc., unlike the actual building. When using the digital twin concept in the prototyping process, it is possible to measure performance from the design stage to the operation stage. The digital twin was found by a method for monitoring based on physical twins and real-time linkage in the operation stage. Therefore, if the digital twin concept is applied at the design stage, it is possible to predict performance using not only current performance but also history information using real-time information. In order to apply the digital twin concept to the prototyping design process, we analyze the theoretical considerations and the prototyping design process of the digital twin, analyze the cases and research results where the prototyping design was applied, Provide an applied prototyping design process. The proposed process is tested through a pilot project and analyzed for potential use.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.741-746
• /
• 2004

We propose a new technique to the design and real-time implementation of an adaptive controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot consisting of two 4-d.o.f. robots at the joint space and cartesian space.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.169-179
• /
• 2010

iA-Canvas is HMI program which is the industrial automation application developed based on the Java language, and can run on any OS such as Windows, UNIX, Linux. The iA-Canvas is built on object-oriented open structure and consider network functionality and user experience as a system of centralized management and distributed management. iA-Canvas is composed of several components such as Builder, IO Server, Viewer, and Web Service Module and provides a GUI control environment. This paper explains design and implementation of iA-Canvas that is a tool for development of integrated management system, and shows practical examples of integrated management system that use iA-Canvas.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.330-330
• /
• 2002

The combination of Multi-Beam Echo Sounder swath bathymetry and high-resolution towed Sidescan sonar provides a powerful method of examination about hydrographic survey results. In this paper, we investigate the fast method of 3D bathymetric reconstruction with the Digital Sidescan sonar(Benthos SIS 1500) and Shallow Multi-Beam Echo Sounder(Reson Seabat 8125). The Seabat 8125 is a 455KHz high resolution focused Multibeam echo sounder(MBES) system which measures the relative water depth across a wide swath perpendicular to a vessel's track. The Benthos SIS1500 is a chirp(nominal fq. 200KHz) sonar which map the topographical features & sediment texture of ocean bottom using backscattered amplitude. We generates the very large 3D bathymetric texture mapping model with the Helical System's HHViewer and describes additional benefits of combining MBES and Sidescan Sonar imagery, the removal of geometric distortions in the model and a deterministic sounding noise.