• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.102-115
• /
• 2014

The stamped earth method is a typical ancient engineering technique which consists of in-filling wooden frame with layers of stamped earth or sand. This method has been universally used to construct earthen walls and buildings, etc. The purpose of this article is to understand the construction method and principles of the stamped earthen wall through analysis of various construction techniques of Pungnaptoseong Fortress(Earthen Fortification in Pungnap-dong). First of all, the ground was leveled and the foundations for the construction of the earthen wall were laid. The underground foundation of the earthen walls was usually constructed by digging into the ground and then in-filling this space with layers of mud clay. Occasionally wooden posts or paving stones which may have been used to reinforce the soft ground were driven in. The method of adding layers of stamped earth at an oblique angle to either side of a central wall is the most characteristic feature of Pungnaptoseong Fortress. Even though the traces of fixing posts, boards, and the hardening of earth - all signatures of the stamped earth technique - have not been identified, evidence of a wooden frame has been found. It has also been observed that this section was constructed by including layers of mud clay and organic remains such as leaves and twigs in order to strengthen the adhesiveness of the structures. The outer part of the central wall was constructed by the anti-slope stamped earth technique to protect central wall. In addition a final layer of paved stones was added to the upper part of the wall. These stone layers and the stone wall were constructed in order to prevent the loss of the earthen wall and to discharge and drain water. Meanwhile, the technique of cementing with fire was used to control damp and remove water in stamped earth. It can not be said at present that the stamped earth method has been confirmed as the typical construction method of Korean ancient earthen walls. If we make a comparative study of the evidence of the stamped earth technique at Pungnaptoseong Fortress with other archeological sites, progress will be made in the investigation of the construction method and principles of stamped earthen wall.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.198-221
• /
• 2017

The Jjoksaem site is the eastern sector of Daereungwon Ancient Tomb Complex, Gyeongju(the 512th Historic site) called Wolseong North Burial Ground in academic community. The excavation and research of this site was conducted from 2007 to 2015, with the purpose of basic data offering for the restoration of Silla tumuli and development of ancient tomb park. As a result of the investigation, more than 700 new tombs were discovered except the 155 tumuli founded in the Japanese colonial era. Moreover, more than 70 percent of the smaller tombs, such as outer coffin tombs, were discovered here. There are four characteristics of outer coffin tombs in Jjoksaem site. First, it is recognized the Gyeongju-styled outer coffin tombs have a long rectangular shape, distinct from Gimhae-styled outer coffin tombs in a rectangular shape. Second, they are divided into three groups by the size of the grave area. This is indirectly related to the rank and the status of the buried person. Third, these tombs began to be constructed at the end of the 3rd century before the time of wooden chamber tombs covered by stone and earthen mound. They were ruined because of the new tombs constructed at the period of Maripgan. This reflects that the identity of the former tombs was not respected by the communities in the later generations. Outer coffin tombs were consistently made to the end of the era of wooden chamber tombs covered by stone and earthen mound. Lastly, the area of burial ground of outer coffin tombs is limited by wooden chamber tombs covered by stone and wooden mounds. Otherwise, the location of the burial ground for the deceased is limited by the status of the deceased. The idea that wooden chamber tombs covered by stone and earthen mound are located on the above ground turns out to be incorrect. In Jjoksaem site, there is little difference between the height of the circular burial protection stone and the height of the digging lines of the other tombs. In the case of No.44 tumulus, the lowest step of the circular burial protection stones is lower than those of the other tombs and tumuli. Research of outer coffin tombs at Jjoksaem site will be to suggest important academic data about the changing period from Saroguk, as the head of chiefdom union, to Silla, as state.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.144-179
• /
• 2010

Investigation into iron manufacture relics has been active since 1970s, especially accelerated in 1990s across the country. Consideration of the importance of production site relics has lately attracted attention to iron manufacture relics. Methodological studies of the investigation into iron manufacture relics, however, were less made compared with those of the investigation into tomb, dwelling, or swampy place relics. It is because the process of iron manufacture is too complicated to understand and also requires professional knowledge of metal engineering. With the recognition of these problems this research is to form an opinion about how to excavate, to rearrange and classify, and to examine iron manufacture relics, based upon the understanding of the nature of iron, iron production process, and metal engineering features of related relics like slag, iron lumps and so on. This research classifies iron manufacture relics into seven types according to the production process; mining, smelting, refining, tempering, melting, steelmaking, and the others. Then it arranges methods to survey in each stage of field study, trial digging, and excavation. It also explains how to classify and examine excavated relics, what field of natural science to be used to know the features of relics, and what efforts have been made to reconstruct a furnace and what their problems were, making the best use of examples, drawings, and photos. It comes to the conclusion, in spite of the lack of in-depth discussion on application and development of various investigation methods, that iron manufacture relics can be classified according to the production process, that natural sciences should be applied to get comprehensive understanding of relics as well as archeological knowledge, and that efforts to reconstruct a furnace should be continued from the aspect of experimental archeology.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.31-38
• /
• 2019

This study quantified, through a direct harvesting method, storage and annual uptake of carbon from open-grown trees for three landscape tree species frequently planted in the southern region of Korea, and developed quantitative models to easily estimate the carbon reduction by tree growth for each species. The tree species for the study included Camellia japonica, Lagerstroemia indica, and Quercus myrsinaefolia, for which no information on carbon storage and uptake was available. Ten tree individuals for each species (a total of 30 individuals) were sampled considering various stem diameter sizes at given intervals. The study measured biomass for each part of the sample trees to quantify the total carbon storage per tree. Annual carbon uptake per tree was computed by analyzing the radial growth rates of the stem samples at breast height or ground level. Quantitative models were developed using stem diameter as an independent variable to easily calculate storage and annual uptake of carbon per tree for study species. All the quantitative models showed high fitness with $r^2$ values of 0.94-0.98. The storage and annual uptake of carbon from a Q. myrsinaefolia tree with dbh of 10 cm were 24.0 kg and 4.5 kg/yr, respectively. A C. japonica tree and L. indica tree with dg of 10 cm stored 11.2 kg and 8.1 kg of carbon and annually sequestered 2.6 kg and 1.2 kg, respectively. The above-mentioned carbon storage equaled the amount of carbon emitted from the gasoline consumption of about 42 L for Q. myrsinaefolia, 20 L for C. japonica, and 14 L for L. indica. A tree with the diameter size of 10 cm annually offset carbon emissions from gasoline use of approximately 8 L for Q. myrsinaefolia, 5 L for C. japonica, and 2 L for L. indica. The study pioneers in quantifying biomass and carbon reduction for the landscape tree species in the southern region despite difficulties in direct cutting and root digging of the planted trees.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.428-434
• /
• 2019

Many countries have interested animal welfare. Similarly, domestic people have concern for the welfare from companion animals to livestock. Environmental enrichments (EE) are tool to enforce the welfare, however, research with sows is limited. Therefore, this study was investigate to effects of environmental enrichments on performance and behavior properties of gestating sows. A total of 30 pregnant sows (Landrace) were assigned into three treatments that control, T1 (plastic device) and T2 (Rice straw). Period of trial was from Mar. 03. 18. to Mary 19. 18. The EE were allotted to center of experimental pen ($11.6{\times}6.0m$). Body weight (BW), backfat thickness (BF) and cortisol were identified at experimental initial or end date. Behavior was recorded during 24 hours on days 91 of gestation, and then analyzed the patterns. BF was reduced (15.73 vs. 16.56 mm; p>0.05) in T1 than control, but Ending BW, total litter size and alive piglets did not differ. Born dead piglets showed lower tendency (1.00 and 0.63 vs. 1.50 heads; p>0.05) in T1 and T2 than control. Similarly, the enrichments declined farrowing mortality (C, 8.68%; T1, 6.86%; T2, 3.40%; p>0.05). Cortisol was not differed among treatments. In the behavior characteristics, eating showed lower (1.81 vs. 9.68 and 6.99%; p<0.05) in T2 than control and T1. Furthermore, playing or digging were only observed (0.33 and 2.10%; p<0.05) in T1 and T2, respectively, whereas rubbing (0.91%, p<0.05) only showed in the control. These results suggest that the provision of EE would be not negatively affected the performance of the gestating sows and could be led to improvement of the livestock welfare.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.105-120
• /
• 2011

A moat is a pond or waterway paved on the outside of a fortress that is one of the facilities to prevent enemy from approaching the fortress wall or classify it as the boundary space, moats had existed in Europe, Asia and the America from ancient times to medieval times. however it is has been disappeared in modem society. In addition, a moat is a great value in historical and cultural sense such as offering a variety of cultural activities and habitats for animals, but unfortunately there is little consideration of its restoration plan. This research is aimed to investigate historical and cultural meaning and significance of moats which had been existing from ancient times to medieval times in the Eastern and Western. For this purpose, this research analyzed concepts and functions in consideration with times and ideological backgrounds of moats in Korea, China, and Japan. Results were as follows: 1. Moats in Korea existed not only in the castle towns of Goguryeo but also in ancient castle towns of Baekje and Silla. Natural moats and artificial moats existed around castles that were built to prevent and disconnect accessibility of enemies In Goryeo Dynasty and Chosun Dynasty, moats were also used as a defensive function. 2. A moat was generally installed by digging in the ground deep and wide at regular intervals from the ramparts, A moat was installed not only around a castle but also in its interiors. Moats outside castles played an important role in stomping the ground hard besides enhancing its defensive power. In addition, water bodies around a facility often discouraged people's access and walls or fences segregated space physically, but a moat with its open space had an alert and defensive means while pertaining its visual characteristics. 3. The moat found at Nagan Eupseong rumor has it that a village officials' strength was extremely tough due to strong energy of the blue dragon[Dongcheon] in Pungsujiri aspects, so such worries could be eliminated by letting the stream of the blue dragon flow in the form of 'S'. 4. The rampart of the Forbidden City of China is 7.9 meters high, and 3,428 meters long in circumference. It was built with 15 layers of bricks which were tamped down after being mixed with glutinous rice and earth, so it is really solid. The moat of the Forbidden City is 52 meters in width and 6 meters in depth, which surrounds the rampart of the Forbidden City, possibly blocking off enemies' approach. 5. Japan moats functioned as waterways due to their location in cities, further, with the arrangement of leisure facilities nearby, such as boating, fishing from boats, and restaurants, it helped relieve city dwellers' stress and functions as a lively city space. 6. Korean moats are smaller in scale than those of the Forbidden City of China, and Edo, and Osaka castles in Japan, Moats were mostly installed to protect royal palaces or castles in the Eastern Asia whereas moats were installed to protect kings, lords, or properties of wealthy people in the west.

• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.412-420
• /
• 2001

This study was conducted to identify the optimum cooking method and the ideal composition of Wax gourd Jung Kwa for the purpose of wide distribution. Wax gourd Jung Kwa was made by peeling off the wax gourd, digging out the stuff, slicing, soaking the pieces in ash water, and boiling slightly, then boiling down in honey, grain syrup. sugar, etc. As a result of sensory evaluation, the best color of Jung Kwa was observed in the recipe of pretreated wax gourd 300g, water 1 litre and grain syrup 495$m\ell$; for the flavor, hardness and chewiness, Pretreated wax gourd 300g, water 1 litre, corn syrup 475$m\ell$ and sugar 70g; for the adhesiveness, pretreated wax gourd 300g, water 1 litre and corn syrup 515$m\ell$; for the sweetness, pretreated wax gourd 300g, water 600$m\ell$ and sugar 90g and honey 120g. Overall Qualify was the highest in the recipe of pretreated wax gourd 300g, water 1 litre, com syrup 475$m\ell$ and sugar 70g, of which the sweetness was 74%. There were significant differences in all items (P＜0.05). For mechanical characteristics, the maximum cutting force was the highest in the samples with the recipe of pretreated wax gourd 300g, water 1 litre, corn syrup 475$m\ell$ and sugar 70g, and there were significant differences among all items (P<0.05). The highest moisture content, 45.54%, was observed in the recipe of pretreated wax gourd 300g. water 1 litre and corn syrup 475$m\ell$. There were significant differences among all items (P＜0.05). The L value(lightness) was the highest in the recipe of pretreated wax gourd 300g, water 1 litre, corn syrup 475 $m\ell$ and sugar 50g. The a value(redness) was the highest in the case of pretreated wax gourd 300g, water 1 litre, com syrup 475$m\ell$ and sugar 70g, which was almost red; and the b value(yellowness), wax gourd 300g, water 1 litre and corn syrup 475g, which gave almost Yellow color. Taking consideration of the above results, the most desirable recipe for wax gourd Jung Kwa was to mix the 300g of pretreated wax gourd with 20g of ash powder, boil them slightly for 2 min, soak them in cold water for 1 hour, and boil them down with 475$m\ell$ of com syrup, 70g of sugar, and 1 litre of water for 5 hours, resulting in the sweetness of 74%. The samples with above recipe were the best in flavor, chewiness and hardness in sensory evaluation, and showed the highest maximum cutting force and nearest red color in the mechanical test.