• 대한환경공학회지
• /
• 제33권11호
• /
• pp.804-811
• /
• 2011

본 연구는 흡착제의 흡착특성을 이해하는데 이용되는 각종 흡착모델의 적용성을 평가하는데 목적이 있다. 이를 위해 상용의 음이온교환수지(PA-308)를 이용하여 질산성질소에 대한 흡착특성을 회분식 실험을 통해 조사하였다. 음이온교환수지에 의한 질산성질소의 속도실험 결과는 초기의 빠른 흡착과정과 후기의 느린 흡착 과정의 두 가지 단계의 과정으로 이원화되는 경향을 나타내었다. 1차 속도식과 2차 속도식 모두 전체 반응시간에서의 질산성질소에 대한 음이온교환수지의 흡착속도를 수식화 할 수 없었다. 초기의 빠른 흡착반응($t\leq$ 20분)은 1차 속도식에 따르고 외부확산에 의해 거의 지배되는 거동을 보이는 반면, 후기 느린 흡착반응(t > 20분)은 2차 속도 화학반응과 내부확산, 즉 세공 내 확산에 의해서 일어남을 알 수 있었다.

• 대한금속재료학회지
• /
• 제49권7호
• /
• pp.577-582
• /
• 2011

The newly developed ${\alpha}-case$ controlled mold material for Ti investment castings was suggested in this research. The $Al_2O_3$ mold containing interstitial $TiO_2$ and substitutional $Ti_3Al$ was manufactured by the reaction between $Al_2O_3$ and Ti. It is obvious that as the $TiO_2$ and $Ti_3Al$ content in the mold surface were increased, the depth of the interfacial reaction was significantly reduced. In addition, substitutional $Ti_5Si_3$ in the mold surface owing to the reaction between Ti and $SiO_2$ from the binder was effective for ${\alpha}-case$ reduction. Therefore, the ${\alpha}-case$ reduction was accomplished by the diffusion barrier effect of interstitial $TiO_2$, substitutional $Ti_3Al$ and $Ti_5Si_3$.

• 한국식품과학회지
• /
• 제12권2호
• /
• pp.122-125
• /
• 1980

표준 도정한 쌀 보리(품종 세도하다까) 및 겉 보리 (수원 18호)의 취반에 대한 기작을 연구하였다. 취반 (취반 온도 $90^{\circ}{\sim}120^{\circ}C$) 후 입자의 경도는 texturometer로 측정하였다. 쌀 보리나 겉 보리는 비슷한 취반양상을 보이며 고온($110^{\circ}C$이상)에서는 갈변 현상과 동시에 입자 자체는 붕괴하면서도 연화도는 계속 증가하였다. 취반 속도는 1차 반응의 식으로 표시될 수 있었으며 취반의 활성화 에너지는 $100^{\circ}C$ 이하에서는 약 16,000cal/mole, $100^{\circ}C$ 이상에서는 약 9,500 cal/mole이었다. 보리의 취반 과정은 다음의 두 기작으로 설명할 수 있었다. 즉 취반 온도 $100^{\circ}C$ 이하에서는 보리의 성분 및 물에 의한 화학 반응이, 취반 온도 $100^{\circ}C$이하에서는 보리의 성분 및 물에 의한 화학 반응이, 취반 온도 $100^{\circ}C$ 이상에서는 취반된 부분으로부터 취반되지 않은 부분 (즉 반응이 진행되고 있는 부분)으로의 물의 확산 속도가 취반 속도를 제한하였다.

• 대한금속재료학회지
• /
• 제48권4호
• /
• pp.315-319
• /
• 2010

In this study, the hydrogen reduction behavior of ball-milled NiO nanopowder was investigated depending on the partial pressure of water vapor. The hydrogen reduction behavior was analyzed by thermogravimetry and hygrometry under heating to 873 K in hydrogen. In order to change the partial pressure of the water vapor, the dew point of hydrogen was controlled in the range of 248 K~293 K by passing high-purity hydrogen through a saturator that contained water. Interestingly, with the increase in the dew point of the hydrogen atmosphere, the first step of the hydrogen reduction process decreased and the second step gradually increased. After the first step, a pore volume analysis revealed that the pore size distribution in the condition with a higher water vapor pressure shifted to a larger size, whereas the opposite appearedat a lower pressure. Thus, it was found that the decrease in the pore volume during the chemical reaction controlled process at a dew point of 248 K caused a reduction in retardation in the diffusion controlled process.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.505-510
• /
• 2000

In this investigation, we fabricated RBSN (Reaction Bonded Silicon Nitride) using the static nitriding system which could be advantageous for commercialization. Firstly, Si compacts of different sizes were made, and then nitridation rates were investigated as a function of added static gas pressure. The reaction schedule was obtained by pre-experiments. In case of small samples, the variation of ${\alpha}$, ${\beta}$ phases between the inside and the outside region of the specimens was examined after the samples were nitrided under 1 bar and 1.5 bar reaction pressure. On the other hand, large samples of Si compact with the size of 36 mm for diameter and 23 mm for thickness were nitrided for 26 hours of the total nitridation time, which showed a complete and homogeneous nitriding reaction from the outside to the inside of the samples, although the time was considerably shorter than that needed for convertional nitridation. Nitridation rates obtained at the early stage of reaction were proportional to the reaction gas pressures. The sequences of the nitridation reaction with the thickness were as follows 1) the outside, 2) the inside and 3) the intermediate area of the specimen. These results wer eobtained from the coloration of cross sectioned specimens that had various nitridation rates. Total nitriding reaction kinetics was controlled by chemical reaction, not by diffusion of the nitrogen gas.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.475-480
• /
• 2002

The reliability of the solder joint is affected by type and extent of the interfacial reaction between solder and substrates. Therefore, understanding of intermetallic compounds produced by soldering in electronic packaging is essential. In-based alloys have been favored bonding devices that demand low soldering temperatures. For photonic and fiber optics packaging, m-based solders have become increasingly attractive as a soldering material candidate due to its ductility. In the present work, the interfacial reactions between indium solder and bare Cu Substrate are investigated. For the identification of intermetallic compounds, both Scanning Electron Microscopy(SEM) and X-Ray Diffraction(XRD) were employed. Experimental results showed that the intermetallic compounds, such as Cu$_{11}$In$_{9}$ was observed for bare Cu substrate. Additionally, the growth rate of these intermetallic compounds was increased with the reaction temperature and time. We found that the growth of the intermetallic compound follows the parabolic law, which indicates that the growth is diffusion-controlled.d.

• 공업화학
• /
• 제17권1호
• /
• pp.33-36
• /
• 2006

광경화 접착제로 많이 사용되는 우레탄-아크릴레이트 올리고머의 광경화 거동을 자체촉매화 반응모델식을 통해 중합온도 및 올리고머의 관능성에 따른 영향을 확인하여 보았다. 중합온도가 증가함에 따라 최대중합속도는 감소하여 중합온도가 경화 거동에 대한 영향인자임을 확인할 수 있었으며, 반응속도상수 k는 온도증가에 따라 거의 일정한 값을 보이나 반응차수 m과 n은 증가하는 경향을 보였는데 이는 가교구조에 의한 반응성 기의 확산제한 및 유동성의 제한으로 인한 것으로 판단되어진다. 온도증가에 따른 중합속도의 감소는 주로 반응차수 n의 증가에 의해 진행되었다.

• 전기화학회지
• /
• 제7권1호
• /
• pp.21-25
• /
• 2004

용존수소와 과산화수소의 전기화학 거동을 백금 디스크 전극을 사용하여 정전위 분극법으로 $25^{\circ}C$와 $200^{\circ}C$붕산수용액에서 측정하였다. $25^{\circ}C$에서 용존수소의 산화반응은 전극표면에서의 전자전달속도에 의존하는 반응속도론적 지배반응이었다. 그러나 온도가 올라감에 따라 용존수소의 전기화학 거동은 반응속도론적 지배반응에서 확산지배반응으로 변하였다. 고온 용존수소 조건에서 한 가지 주목할 만한 사실은 물의 산화가 시작되는 직전 전위에서 용존수소의 산화반응이 급격히 줄어드는 특이한 전위영역이 관찰되었다는 점이다. 이 현상은 백금 전극표면에 수산화이온의 흡착에 기인한 것으로 생각된다. 반면에 과산화수소의 경우. 온도가 증가함에 따라 증가하는 확산계수로 인한 전류밀도의 증가를 제외하고는 온도에 따른 전극반응의 명백한 변화는 보이지 않았다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.586-591
• /
• 2001

This research investigated the feasibility of the accelerated carbonation of cement waste forms with carbon dioxide in a supercritical state. Hydraulic cement has been used as a main solidification matrix for the immobilization of radioactive and/or hazardous wastes. As a result of the hydration reaction for major compounds of portland cement, portlandite (Ca(OH)$_2$) is present in the hydrated cement waste form. The chemical durability of a cement form is expected to increase by converting portlandite to the less soluble calcite (CaCO$_3$). For a faster reaction of portlandite with carbon dioxide, SCCD (supercritical carbon dioxide) rather than gaseous $CO_2$, in ambient pressure is used. The cement forms fabricated with an addition of slated lime or Na-bentonite were cured under ambient conditions for 28days and then treated with SCCD in an autoclave maintained at 34$^{\circ}C$ and 80atm. After SCCD treatment, the physicochemical properties of cement matrices were analyzed to evaluate the effectiveness of accelerated carbonation reaction. Conversion of parts of portlandite to calcite by the carbonation reaction with SCCD was verified by XRD (X-ray diffraction) analysis and the composition of portlandite and calcite was estimated using thermogravimetric (TG) data. After SCCD treatment, tile cement density slightly increased by about 1.5% regardless of the SCCD treatment time. The leaching behavior of cement, tested in accordance with an ISO leach test method at 7$0^{\circ}C$ for over 300 days, showed a proportional relationship to the square root of the leaching time, so the major leaching mechanism of cement matrix was diffusion controlled. The cumulative fraction leached (CFL) of calcium decreased by more than 50% after SCCD treatment. It might be concluded that the enhancement of the characteristics of a cement matrix by an accelerated carbonation reaction with SCCD is possible to some extent.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.742-749
• /
• 2002

Numerical Study with detailed chemistry has been conducted to investigate the flame structure and NOx formation characteristics in oxygen -enhanced(CH$_4$/O$_2$-$N_2$) and oxygen-enhanced-EGR(CH$_4$/O$_2$-$CO_2$) counter diffusion flame with various strain rates. A small amount of $N_2$is included in oxygen-enhanced-EGR combustion, in order to consider the inevitable $N_2$contamination by $O_2$production process or air infiltration. The results are as follows : In CH$_4$/O$_2$-$CO_2$flame it is very important to adopt a radiation effect precisely because the effect of radiation changes flame structure significantly. In CH$_4$/O$_2$-$N_2$flame special strategy to minimize NO emission is needed because it is very sensitive to a small amount of $N_2$. Special attention is needed on CO emission by flame quenching, because of increased CO concentration. Spatial NO production rate of oxygen-enhanced combustion is different from that of air and oxygen-enhanced-EGR combustion in that thermal mechanism plays a role of destruction as well as production. In case CH$_4$/O$_2$-$CO_2$flame contains more than 40% $CO_2$it is possible to maintain the same EINO as that of CH$_4$/Air flame with accomplishing higher temperature than that of CH$_4$/Air flame. EINO decreases with increasing strain rate, and those effects are augmented in CH$_4$/O$_2$flame.