• Computers and Concrete
• /
• 제8권3호
• /
• pp.343-355
• /
• 2011

This paper presented the model to predict the chloride diffusion coefficient in tension zone of plain concrete under flexural cyclic load. The fictitious crack based analytical model was used together with the stress degradation law in cracked zone to predict crack growth of plain concrete beams under flexural cyclic load. Then, under cyclic load, the chloride diffusion, in the steady state and one dimensional regime, through the tension zone of the plain concrete beam, in which microcracks were formed by a large number of cycles, was simulated with assumptions of continuously straight crack and uniform-size crack. The numerical analysis in terms of the chloride diffusion coefficient, $D_{tot}$, normalized $D_{tot}$, crack width and crack length was issued as a function of the load cycle, N, and load level, SR. The nonlinear model as regarding with the chloride diffusion coefficient in tension zone and the load level was proposed. According to this model, the chloride diffusion increases with increasing load level. The predictions using model fit well with experimental data when we adopted suitable crack density and tortuosity parameter.

• Ocean and Polar Research
• /
• 제26권1호
• /
• pp.33-42
• /
• 2004

Effect of freshwater discharge on the long-term salt balance in the Northern and Central Indian River Lagoon (IRL) is successfully simulated by a new analytical solution to a water balance-based one-dimensional salt conservation equation. Sensitivity tests show that the salinity levels drop abruptly even during the dry season (November to May) due to the high surface runoff discharge caused by tropical storms, depressions, and passage of cold fronts. Increasing surface runoff and direct precipitation has risen by ten times, lowering the salinity level down to 12psu in the Northern Central zone, and to 17 psu in the Northern zone. However, the salinity level in the Southern Central zone has decreased to 25 psu. High sensitivity of the Northern Central zone to freshwater discharge can be partially explained by a rapid urbanization in this zone. During the dry season, less sensitivity of the Southern Central zone to the increased surface runoff is attributed to the proximity of the zone to the Sebastian Inlet and a strong diffusion condition possibly resulting from the seawater intrusion to the surficial aquifer at the Vero Beach. During the wet season, however, the whole study area is highly sensitive to freshwater discharge due to the weak diffusion conditions. High sensitivity of the IRL to the given diffusion conditions guarantees that the fresh-water release occurs during strong wind conditions, achieving both flood control in the drainage basin and a proper salinity regime in the IRL.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.51-59
• /
• 2005

Co-flow laminar diffusion flames' temperature has been studied experimentally for ethylene$(C_2H_4)$ using a co-flow burner in order to investigate the characteristics of diffusion flame's temperature distribution. The temperature distributions in the flame were measured by rapid insertion of a R-type thermocouple. The measurement area was divided into three zones. 1st area was expect to created PAH zone, Il nd area was expect to form soot zone, which is known to generate most soot volume fraction, and III rd area was expect to from soot oxidization zone. Also The temperature along the flame y-axis as a fuel quantity was measured. As a results, we have measured temperature neglecting the effect of soot particles attached to the thermocouple junction, which is close to the nozzle and upstream zone has a unstable flow in co-flow diffusion flame and acquires that the flame y-axis temperature has a uniform temperature in the generated soot volume fraction zone(II nd).

• 한국연소학회지
• /
• 제1권1호
• /
• pp.11-18
• /
• 1996

The stabilization characteristics of diffusion flame formed behind a bluff body with fuel injection slits was experimentally investigated by varying main fuel injection angles and auxiliary fuel injection conditions. The flame stability limits, temperature and length of recirculation zone, direct and schlieren photographs of flames were measured in order to study the stabilization mechanism of the diffusion flame. The results of this investigation are as follows. The stability limits can be improved by the condition of the kind and quanity of the injected auxiliary fuel. The length and temperature decrease with injection of auxiliary fuel, and these phenomena are remarkable when LPG is injected into the recirculation zone. When the LPG is injected into the recirculation zone, flame remains sooty. Fluctuation of fuel and main stream is generated actively by air injection.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.99-103
• /
• 2010

다공성 매질상에서 유체와 용질의 이동은 Mobile zone과 Immobile zone으로 분리해서 분석하는 Mobile-Immobile Zone Model을 이용하여 쉽게 현상을 구현할 수 있었으나 본 연구에서는 2차원 4각형태의 pore 상에서 확산주도영역(Immobile zone)으로 들어가고 나오는 용질의 확산에 관한 새로운 Analytic solution을 유도하여 기존 MIM Zone model과 비교 분석하였다. 새롭게 유도된 Analytic solution은 기존의 MIM model 과 비교했을때 충분히 오랜시간이 경과한 후에는 해의 일치를 보이지만 MIM model의 경우 초기 농도값이 주입된 실제 농도보다 약 20 % 낮게 나타난다. Mass-transfer 계수, $\alpha$는 일반적으로 시간의 흐름에 따라 감소하게 되는데 일정 시간이 경과하게 되면 안정화 되고 일정함을 유지하며 그 시간은 무차원으로 약 ${\tau}_0=0.15$이다. 또한 $\alpha$는 분자확산과 비례하며 Immobile 영역의 깊이와 반비례하는 반면 작은 시간이 경과한 후에는 시간에 종속되어진다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.177-180
• /
• 2007

Numerical simulations on the suspended load in the Do jang fish port are carried out. Suspended load is analysed by using the two-dimensional advection-diffusion equation. To describe behaviors of a pollutant in costal zone, a split-operator method is applied to the numerical model. The advection part is first solved by SOWMAC and then the diffusion part is solved by a three-level locally implicit scheme.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1671-1678
• /
• 1996

In external chemical vapor deposition processes including VAD and OVD the distribution of flame-synthesized silica particles is determined by heat and mass transfer limitations to particle formation. Combustion gas flow velocities are such that the particle diffusion time scale is longer than that of gas flow convection in the zone of particle formation. The consequence of these effects is that the particles formed tend to remain along straight smooth flow stream lines. Silica particles are formed due to oxidation and hydrolysis. In the hydrolysis, the particles are formed in diffuse bands and particle formation thus requires the diffusion of SiCl$\_$4/ toward CH$\_$4//O$\_$2/ combustion zone to react with H$\_$2/O diffusing away from these same zones on the torch face. The conversion kinetics of hydrolysis is fast compared to diffusion and the rate of conversion is thus diffusion-limited. In the language of combustion, the hydrolysis occurs as a Burke-Schumann process. In selected conditions, reaction zone shape and temperature distributions predicted by the Burke-Schumann analysis are introduced and compared with experimental data available. The calculated centerline temperatures inside the reaction zone agree well with the data, but the calculated values outside the reaction zone are a little higher than the data since the analysis does not consider diffusion in the axial direction and mixing of the combustion products with ambient air. The temperatures along the radial direction agree with the data near the centerline, but gradually diverge from the data as the distance is away from the centerline. This is caused by the convection in the radial direction, which is not considered in the analysis. Spatial distribution of silica particles are affected by convection and diffusion, resulting in a Gaussian form in the radial direction.

• 한국전산구조공학회논문집
• /
• 제22권6호
• /
• pp.607-615
• /
• 2009

본 논문에서는 염소이온의 확산과 이송해석이 가능한 유한요소해석 프로그램을 개발하였으며, 해양 간만대의 건습 반복 조건을 고려하여 염소이온 침투해석을 수행하였다. 염소이온 침투에 영향을 미치는 열과 수분의 전달을 동시에 고려하였으며, 특히 염소이온 이송을 생성항 또는 소멸항으로 처리하여 온도, 상대습도, 염소이온농도를 순차적으로 풀 수 있도록 하였다. 건습 반복 주기를 변수로 한 유한요소해석 결과와 ACI Life-365방법에 의한 침투 프로파일의 비교를 통하여, Life-365 방법은 해중에서의 염소이온 침투에 대해서는 정확한 결과를 주지만 간만대의 해석결과는 건습 주기의 영향을 고려하지 못하는 것을 확인하였다. 실제 해양 콘크리트는 다양한 건습 주기의 간만대 환경에 노출되어 있으므로, 정밀한 염소 이온 침투해석을 위해서는 확산-이송 해석을 수행해야 할 것으로 생각된다.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1269-1279
• /
• 1995

An experimental study is carried out on turbulent diffusion flames stabilized by a circular cylinder in a divergent duct flow. A commercial grade gaseous propane is injected from two slits on the rod as fuel. Flame stability limits, as well as size and temperrature of recirculation zone, are measured by direct and schlieren photographs to clarify the characteristics and structure of diffusion flames and to assess the effect of various divergent angle of duct. The results of the present study are as follows. Temperature in the recirculation zone decreases with increasing divergent angle. The blow-off velocity in parallel duct is higher than that in divergent duct. Critical blow-off velocity is expected to be about 8-12 degree through blow-off velocity pattern. Regardless of divergent angles, the length of recirculation zone is nearly constant, and this length becomes longer with rod diameter. Pressure gradient has an effect on the eddy structure in shear layer behind the rod. With the increase of divergent angle, large scale eddies by dissipated energy in shear layer are split into small scale eddies, and the flame becomes a typical distributedreacting flame.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.119-126
• /
• 2019

해안 지역에 시공된 철근 콘크리트 구조물은 해수 중의 염소 이온에 의해 내부 철근이 부식하게 된다. 특히 해안지역에서는 해수에 침지되는 경우뿐만 아니라 조수간만 및 비래염분의 영향을 받기 때문에 이에 대한 고려가 필수적이다. 본 연구에서는 3가지 수준의 노출 환경(침지대, 간만대, 비말대)과 노출기간 180일, 365일, 730일을 고려하여 해양환경노출실험을 실시하였다. 대상 배합은 3가지 수준의 물-결합재비 및 2가지 수준의 플라이애시 치환률(0 %, 30 %)을 고려하여 설정하였다. 모든 노출조건에서 플라이 애시 치환 배합이 OPC 배합 대비 낮은 겉보기 염화물 확산계수를 나타내었으며, 이는 플라이애시의 포졸란 반응이 원인으로 사료된다. 플라이애시 배합은 노출 기간 180일에서는 플라이애시 치환 배합이 OPC 배합 대비 최대 63 5 %의 감소율을, 노출 기간 730일 에서는 최대 55.8 %의 감소율을 나타내었다. 노출 조건에 따른 확산계수 거동을 평가한 결과, 플라이애시 치환 배합에서는 간만대, 침지대, 비말대 순으로 확산계수가 평가되었다. 간만대에서는 건습이 반복되어 염화물 이온의 침투가 빠르게 일어나는 것으로 보인다.