• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.136-142
• /
• 1997

In this study, the amorphous foil filler, thickness of 20 - $20~30\mu\textrm{m}$ was made to develop Cu-7.5wt%Mn-7.5wt%Si insert alloy(melting point temperature : solidus line 1003K, liquidus line 1070K). Liquid phase diffusion bonding of 304 stainless steels (STS304), is carried out successfully by using developed Cu-7.5Mn-7.5Si insert alloy. Bonding conditions are taken from bonding pressure of 5MPa, bonding temperatures from 1073K to 1423K varied within 50K and brazing holding times of 0, 30, 60 and 240 minutes. As the results, the tensile strength in the liquid phase diffusion bonding is a little bit lower than that in the solid phase diffusion bonding. The authors find out that the liquid phase diffusion bonding needs lower bonding pressure than the others. Therefore, the liquid phase diffusion bonding had an excellent brazability in which the bonding process showed the typical mechanism of diffusion bonding. In corresponding, the new developed insert alloy of low melting pointed Cu-7.5Mn-7.5Si makes possible brazing between the STS304.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.348-356
• /
• 2012

This study is identifying early takeoff phenomenon in relational network like SNS and investigates influence of innovator or hub at early takeoff and diffusion size at takeoff point. The major finding of this study are as follows. First, multinominal-logit analysis conducted to explore the impact of innovator and hub at early stage of information diffusion and early takeoff. Hub in early stage of information diffusion impact early takeoff. Second, our study shows that innovator and hub at early stage of information diffusion impact diffusion size at takeoff point. Third, hub is more impact early takeoff and diffusion size at takeoff point then innovator. This study provides implication for professionals by confirming hub's influence in study of successful information diffusion by early takeoff. The limitation and future direction are discussed.

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.119-122
• /
• 2004

In this paper, we examine the necessity and the role of technology transfer/diffusion in the frame of national technology innovation system. On the base of this, we present a construction plan of technology transfer/diffusion system to make the national electric industry for 21st century to possess the competitive power. To achieve above purpose, we examine the relations between theory of technology transfer/diffusion structure and policy. Furthermore, we try to find the necessity for construction of technology transfer ＆ diffusion system and a driving plan. Then, it is analyzed that expected design requirements for the construction of electric technology transfer ＆ diffusion system. Finally, construction and activation plan for electric technology transfer ＆ diffusion system are presented, which would strengthen the national technology competitiveness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.731-734
• /
• 2000

The characterization of Zinc diffusion processes applied fur high-speed avalanche photodiodes has been examined. The different diffusion process conditions for InP test structures were explored. The Zinc diffusion profiles, such as the diffusion depth and the Zinc dopant concentration, were examined using secondary ion mass spectrometry with varying the process variables and material parameters. It is observed that the diffusion profiles are severely impacted on the process parameters, such as the amount of Zn$_3$P$_2$source and the diffusion time, as well as material parameters, such as doping concentration of diffusion layer. These results can be utilized for the high-speed avalanche photodiode fabrication.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.1019-1030
• /
• 2017

Diffusion is a crucial mechanism that regulates the migration of radioactive nuclides. In this study, an innovative numerical method was developed to simultaneously calculate the diffusion coefficient of both parent and, afterward, series daughter nuclides in a sequentially reactive through-diffusion model. Two constructed scenarios, a serial reaction (RN_1 ${\rightarrow}$ RN_2 ${\rightarrow}$ RN_3) and a parallel reaction (RN_1 ${\rightarrow}$ RN_2A + RN_2B), were proposed and calculated for verification. First, the accuracy of the proposed three-member reaction equations was validated using several default numerical experiments. Second, by applying the validated numerical experimental concentration variation data, the as-determined diffusion coefficient of the product nuclide was observed to be identical to the default data. The results demonstrate the validity of the proposed method. The significance of the proposed numerical method will be particularly powerful in determining the diffusion coefficients of systems with extremely thin specimens, long periods of diffusion time, and parent nuclides with fast decay constants.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.101-115
• /
• 2009

This study analyzed the diffusion process of digital convergence products focused on camera phon to compare the traditional adoption-diffusion model with use-diffusion model proposed by Shih and Venkatesh(2004). The results suggested that observability, perceived usefulness, innovativeness, relative advantage have effects on the intention of repurchase in the adoption-diffusion model. On the other hand, the intention of repurchase has been affected by technological sophistication, satisfaction, innovativeness, relative advantage in the use-diffusion model. These results imply that the traditional adoption-diffusion model could be applied to the cases of the digital convergence products. In addition, the results also show that the use-diffusion model is superior to the traditional model in analyzing the diffusion of digital convergence products.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.91-97
• /
• 2017

Purpose: Various studies on a light shelf are in progress, but it has the problem of glare occurrence. The present study suggested a diffusion film as the method for resolving the glare problem, and aimed to establish light shelf-related basic data by conducting the performance evaluation of a light shelf depending on the installation position of the diffusion film. Method: To carry out the light shelf performance evaluation depending on the diffusion film installation position, three cases were established: no diffusion film installation (Case 1), diffusion film installation on the reflector (Case 2), and diffusion film installation on the upper glass surface of the window for light shelf installation (Case 3); and the energy reduction performance, luminance, and luminance contrast were analyzed based on a testbed. Result: The conclusions of this study are as follows. 1) When the diffusion film was applied, the amount of light introduced through the light shelf decreased, and the average indoor illumination decreased accordingly. 2) For Case 3, the lighting energy reduction performance was identical to the lighting energy reduction efficiency of the existing light shelf; and for Case 2, it was found to be inappropriate as the lighting energy consumption increased compared to that of the existing light shelf. 3) The analysis of the glare for the cases established in this study showed that the luminance contrast was low for Case 3, and thus the glare problem could be minimized. 4) The specific angle of the light shelf could induce the glare problem by increasing the luminance depending on the external condition. 5) Based on the aforementioned contents, the installation position of the diffusion film for improving the lighting performance and glare problem of the light shelf was found to be the upper glass surface of the window for light shelf installation.

• Management & Information Systems Review
• /
• v.32 no.5
• /
• pp.19-43
• /
• 2013

The diffusion of new technology has traditionally focused on the adoption perspective. Researchers refer this use-diffusion paradigm to behaviors of use after adoption. This study intends to analyse the influential factors of use-diffusion and continual use of website and applications in medical service. To achieve this a use-diffusion model as a conceptual frame work is suggested. Medical information quality, personal innovativeness and subjective norm are assumed as antecedent variables medical website and application's rate of use, variety of use, and continued use intention as result variables. According to the empirical study results medical information quality, web based application usability, personal innovativeness, and subjective norm have a meaningful influence on medical service consumer's use-diffusion patterns. Also pattern of use influences the continued use intention. This study provides an opportunity to understand medical service consumer's behavior after website and application use adoption and suggests further directions for establishing medical service online marketing strategy by determining influential factors of use-diffusion and continued use of medical online marketing tools.

• Asia pacific journal of information systems
• /
• v.7 no.3
• /
• pp.89-108
• /
• 1997

This study, drawing upon research in innovation theory and Information systems, investigates the relationship among the organizational and innovation characteristics and the extent of internal and external diffusion of EDI in Korean firms. The data for this study were collected from 131 firms that have implemented EDI. The results of the correlation and the multiple regression analysis show that elapsed time and organizational compatibility are the major predictors of EDI diffusion. Specifically, the extent of communication, elapsed time and organizational compatibility are the major predictors of internal diffusion, while centralization, organizational compatibility and elapsed time are closely related to external diffusion of EDI. The results of this study imply that to facilitate the use of EDI widely within and beyond organizations, EDI system should be compatibile with the organizational tasks, values systems and existing information systems.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.5
• /
• pp.133-145
• /
• 2007

This study investigated the relationship between introduction characteristics of ERP system, innovation diffusion and business performance in public enterprise. This study tried to suggest plans that can adapt and use critical impact factors on public enterprise performance though diffusion of ERP systems. This study suggests that introduction characteristics affect on vertical innovation diffusion and organizational performance, directly and indirectly.