• Journal of Agricultural Extension & Community Development
• /
• v.16 no.1
• /
• pp.201-235
• /
• 2009

This study analyzed the demographic characteristics, strengths and weaknesses related to information acquisition of local innovation diffusion types. This study use ordered probit model to find strengths and weaknesses of innovation diffusion type in rural area. The individual characteristics of 'formal extension type', 'situational reaction diffusion type', 'agriculturist connection type', and 'systematic approach type', all differentiated according to innovation diffusion type, were analyzed. Following Choi & Choe(2008), immediacy, accessibility, referability, applicability, and satisfaction were the highest in the situational reaction diffusion type, systematic approach type, formal extension type, and farmers connection type, in the order. And there existed organic contexts among individual characteristics. So this study tried to analyze strengths and weaknesses of innovation diffusion type with a focus on immediacy, which emerged as the most important variable in the process of interpreting innovation diffusion. And the strengths and weaknesses of each innovation diffusion type were presented.

• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.43-49
• /
• 2002

The NOx emission characteristics of double-concentric diffusion flames and normal diffusion flames fueled with CH$_4$ were studied. Experimental and numerical investigations were carried out for double-concentric diffusion flame with varying central air flow rate and normal diffusion flame. The Emission indices of NOx(EINOx) were measured by chemiluminescent method and calculated by numerical model based on detailed chemistry. From the comparison between double-concentric diffusion flames and normal diffusion flames, the results show that EINOx of double-concentric diffusion flames are lower than normal diffusion flame, because of Prompt EINOx was decreased. EINOx of double-concentric diffusion flames increase with central air flow rate increasing.

• Knowledge Management Research
• /
• v.9 no.3
• /
• pp.77-105
• /
• 2008

This study primarily aims at identifying what factors significantly affect the diffusion of knowledge management systems(KMS) and finding out how these identified factors can be effectively managed, especially for Korean companies. The research model is derived based on previous researches on innovation diffusion, information systems implementation, and KMS. The model is used to examine the role of determinants in influencing the extent to which KMS is diffused within organizations. Independent variables of this research are composed of technical characteristics, organizational characteristics and environmental characteristics. 'Breadth of diffusion' and 'depth of diffusion' concept are used to measure the extent of KMS diffusion which is the dependent variable of this model. The 101 companies of total 1,000 samples responded to the survey. To analyze tile results of this empirical study, we performed the multiple regression analysis. As a result, it was shown that the relative advantage, complexity, information system maturity, size, top management support, champion, competitive pressure have influences on both the breadth and the depth diffusions. On the other hand, the organizational culture, valuation and compensation, and uncertainty of environmental factors were not verified to be significant. This empirical study will provide Korean companies with insights into effective ways to diffuse the KMS and succeed in business competition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.573-576
• /
• 2006

To predict service life of concrete structures exposed to chloride attack, surface chloride concentration, diffusion coefficient of chloride ion, and chloride corrosion threshold value in concrete, are used as important factors. of these, as the diffusion coefficient of chloride ion for concrete is strongly influenced by concrete quality and environmental conditions of structures and may significantly change the service life of structures, it is considered as the most important factor for service life prediction. The qualitative factors affecting the penetration and diffusion of chloride ion into concrete are water-binder(W/B) ratio, age, cement type and constituents, chloride ion concentration of given environment, wet and dry conditions, etc. In this paper the influence of cement type on the diffusion characteristics of chloride ion in concrete was investigated through the chloride ion diffusion test. For this purpose, the diffusion characteristics in concrete with cement type such as ordinary portland cement(OPC), binary blended cement(BBC), and ternary blended cement(TBC) were estimated for the concrete with W/B ratios of 32% and 38%, respectively. It was observed from the test that the difussion characteristics of BBC containing OPC and ground granulated blast-furnace slag was found to be most excellent of the cement type used in this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.673-678
• /
• 2002

There are various methods for the electrochemical techniques to estimate diffusion coefficient of chloride ions in concrete, such as ASTM C 1202 test method, Andrade's method, Dhir's method, Tang's method, and etc. In the case of estimating diffusion coefficient of chloride ions in concrete by using these methods, applied voltage and resistivity nay exercise some influence on the characteristics of chloride ions diffusion. Thus. in this study, effect of applied voltage and resistivity on the characteristics of chloride ions diffusion in concrete were researched by applying voltage in 12V, 30V, and 60V, and by using resistivity in 0.2Ω and 1.0Ω, respectively. It can be concluded that diffusion coefficient of chloride ions are found to be increasing as the individual applied voltage and resistivity decrease, when water-cement ratio is constant.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.7
• /
• pp.163-172
• /
• 1996

Recently, it was reported that gaussian distribution and difference of two gaussians (DOG) to have band pass characteristics can be generated by simple iterative processes of the diffusion networks. In this paper, we propose method of improved implementation of a diffusion filter which can reduce total runing time, and operate by simple algorithm in contrast to the latest diffusion filter. We rebuild the diffusion network to a difference network which can generate DOG independently. Different filter characteristics are obtained just by each diffusion process and difference process. Quantitative analysis shows that the center frequency and the selectivity of each filter channel can be varied independently. Also, it would requires smaller amount of hardwares than conventioanl method to build a filter bank.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2366-2371
• /
• 2007

Spray combustion characteristics of a conducting fuel electrospray have been studied for clean combustion technology. The multiplexing system which can retain the characteristics of the cone-jet mode is inevitable for the electrospray application. Charged micro droplets can be obtained in almost uniform size during operating the electrospray in the cone-jet mode. This experiment device set up the multiplexed grooved nozzle system with the extractor. Using the grooved nozzle, the stable cone-jet mode can be achieved at the each groove in the grooved mode. This electrospray system was applied to the diffusion combustion. It is the first step to discover the diffusion combustion characteristics of the electrospray. In case of the single grooved nozzle electrospray, the diffusion flames are occurred at each jet of grooved mode and they are quite stable. The exhaust gas analysis was indicated that there is the critical point which can make very stable diffusion combustion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.12
• /
• pp.979-985
• /
• 2007

Spray combustion characteristics of the conducting fuel electrospray has been studied for clean combustion technology. The electrospraying multiplexed system which can maintain the characteristics of the cone-jet mode is able to obtain charged micro droplets with high flow rate. In addition, they have monodisperse distribution during operating the electrospray in the cone-jet mode. The multiplexed grooved nozzle system with the extractor was applied to this experimental device set up. The stable grooved mode can be generated by the grooved nozzle and this electrospray system was applied to the diffusion combustion. It is the first step to discover the diffusion combustion characteristics of the electrospray, In case of the single grooved nozzle electrospray the diffusion flames are occurred at each Jet of grooved mode and they are quite stable. The exhaust gas analysis was indicated that there is the critical point which can make very stable diffusion combustion

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.140-149
• /
• 2006

Characteristics of a laminar diffusion flame placed near wall in microgravity have been numerically analyzed in a two-dimension. The fuel for the flame is $C_2H_4$. The flame is initiated by imposing a high temperature ignition source. The flow field, temperature field, and flame shape in microgravity diffusion flame are detailed. Especially, effects of surrounding air velocity and fuel injection velocity on the microgravity diffusion flame have been discussed accounting for standoff distance. And, the effect of curvature rate has been also studied. The results showed that velocities in a diffusion flame were overshoot because of volumetric expansion and distribution of temperature showed regularity by free-buoyancy This means that the diffusion flame in microgravity is very stable, while the flame in normal gravity is not regular and unstable due to buoyancy. Standoff distance decreases with increase in surrounding air velocity and with decrease in fuel injection velocity. With increasing curvature rate, the position of reaction rate moves away the wall.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.737-742
• /
• 2002

The chief factors for the penetration and diffusion of chloride ions in concrete are water-cement ratio(w/c), aging, thickness of cover concrete, chloride ions concentration of given environment, wet and dry conditions and etc. In this study, effect of w/c and aging on the characteristics of chloride ions diffusion in concrete were researched when environmental factors for the penetration and diffusion of chloride ions were constant. For this purpose, the voltages passing through the diffusion cell were measured by using accelerated test method using potential difference, and then diffusion coefficients of chloride ions by using Andrade's method were estimated for 44%, 49.5% and 55% of w/c, respectively. As a result, correlation among diffusion coefficients of chloride ions, w/c and aging were concluded through multiple regression model.