• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.1
• /
• pp.61-69
• /
• 1998

Vapor Axial Deposition (VAD), one of optical fiber preform fabrication processes, is performed by deposition of submicron-size silica particles that are synthesized by combustion of raw chemical materials. In this study, flow field is assumed to be a forced uniform flow perpendicularly impinging on a rotating disk. Similarity solutions obtained in our previous study are utilized to solve the particle transport equation. The particles are approximated to be in a polydisperse state that satisfies a lognormal size distribution. A moment model is used in order to predict distributions of particle number density and size simultaneously. Deposition of the particles on the disk is examined considering convection, Brownian diffusion, thermophoresis, and coagulation with variations of the forced flow velocity and the disk rotating velocity. The deposition rate and the efficiency directly increase as the flow velocity increases, resulting from that the increase of the forced flow velocity causes thinner thermal and diffusion boundary layer thicknesses and thus causes the increase of thermophoretic drift and Brownian diffusion of the particles toward the disk. However, the increase of the disk rotating speed does not result in the direct increase of the deposition rate and the deposition efficiency. Slower flow velocity causes extension of the time scale for coagulation and thus yields larger mean particle size and its geometric standard deviation at the deposition surface. In the case of coagulation starting farther from the deposition surface, coagulation effects increases, resulting in the increase of the particle size and the decrease of the deposition rate at the surface.

• Journal of the Korean Society of Combustion
• /
• v.18 no.4
• /
• pp.44-52
• /
• 2013

Important role of chemical interaction in flame extinction was numerically investigated in downstream interaction among lean(rich) and lean(rich) premixed as well as partially premixed $H_2$-air and CO-air flames. The strain rate varied from 30 to $5917s^{-1}$ until interacting flame could not be sustained anymore. Flame stability diagrams mapping lower and upper limit fuel concentrations for flame extinction as a function of strain rate are presented. Highly stretched interacting flames were survived only within two islands in the flame stability map where partially premixed mixture consisted of rich $H_2$-air flame, extremely lean CO-air flame, and a diffusion flame. Further increase in strain rate finally converges to two points. Appreciable amount of hydrogen in the side of lean $H_2$-air flame also oxidized the CO penetrated from CO-air flame, and this reduced flame speed of the $H_2$-air flame, leading to flame extinction. At extremely high strain rates, interacting flames were survived only by a partially premixed flame such that it consisted of a very rich $H_2$-air flame, an extremely lean CO-air flame, and a diffusion flame. In such a situation, both the weaker $H_2$-air and CO-air flames were parasite on the stronger diffusion flame such that it could lead to flame extinction in the situation of weakening the stronger diffusion flame. Particular concerns are focused on important role of chemical interaction in flame extinction was also discussed in detail.

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.125-134
• /
• 2014

As the social media which was simple communication media is activated on account of twitter and facebook, it's usability and importance are growing recently. Although many companies are making full use of its the capacity of information diffusion for marketing, the adverse effects of this capacity are growing. Because social network is formed and communicates based on friendships and relationships, the spreading speed of the spam and mal-ware is very swift. In this paper, we draw parameters affecting malicious data diffusion in social network environment, and compare and analyze the diffusion capacity of each parameters by propagation experiment with XSS Worm and Koobface Worm. In addition, we discuss the structural characteristics of social network environment and then proposed malicious data propagation model based on parameters affecting information diffusion. n this paper, we made up BA and HK models based on SI model, dynamic model, to conduct the experiments, and as a result of the experiments it was proved that parameters which effect on propagation of XSS Worm and Koobface Worm are clustering coefficient and closeness centrality.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.348-352
• /
• 2007

In submicron processes, the feature size of ULSI devices is critical, and it is necessary both to reduce the RC time delay for device speed performance and to enable higher current densities without electromigration. In case of contacts between semiconductor and metal in semiconductor devices, it may be very unstable during the thermal annealing process. To prevent these problems, we deposited tungsten carbon nitride (W-C-N) ternary compound thin film as a diffusion barrier for preventing the interdiffusion between metal and semiconductor. The thickness of W-C-N thin film is $1,000{\AA}$ and the process pressure is 7mTorr during the deposition of thin film. In this work we studied the interface effects W-C-N diffusion barrier using the XRD and 4-point probe.

• Plant Biotechnology Reports
• /
• v.5 no.4
• /
• pp.345-352
• /
• 2011

The rheological and diffusion properties of blends of agar/guar gum, agar/Phytagel and Phytagel/guar gum were analysed and compared to those properties of agar or Phytagel applied alone at two different gelling concentrations. Moreover, their effects on the shoot multiplication of the apple scion Galaxy and two black locust clones (SF63, SF82) were studied, and their cost benefits over agar were calculated. Elastic hydrogel formation was demonstrated for each blend by rheological measurements, but the gel strength depended on the types and concentrations of the applied gelling agents and blends. Guar gum was able to speed the diffusion in the different blends, and diffusion was independent of gel strength. The rate of shoot multiplication increased (to 8.9 shoots per explant) and the percent of hyperhydrated shoots decreased (to 12%) when the blend of agar/guar gum was used for the shoot multiplication of apple. Similarly, the highest multiplication rates of black locust clones (between 3.9 and 4.1) were obtained on media solidified by blends containing guar gum. The best shoot performance with the lowest percent of hyperhydrated shoots (11-12% in SF63 and 2-23% in SF82) was achieved using agar alone or the agar/guar gum blend. The shoot multiplication was improved of both species and the production cost was reduced by 42% by using the agar/guar gum blend.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.780-787
• /
• 2019

As a carbon-free, green growth alternative, internal and external interest in hydrogen energy and technology is growing. Hydrogen was added to co-axial methane, methane-propane, and methane-propane-ethane diffusion flames, which are the main ingredients of LNG, to evaluate its effect on flame formation and combustion products. The variation in combustion products produced by adding hydrogen gradually to diffusion pyrolysis at room temperature and normal pressure conditions was observed experimentally by using a gas analyzer, and the shape of diffusion pyrolysis was observed step by step using a digital camera. The experimental results showed that the production volume of nitrogen oxides tended to increase and became close to linear as hydrogen was added to the diffusion pyrotechnic. This is because the relatively high temperature of heat insulation and fast combustion speed of hydrogen facilitated the production of thermal NOx. On the other hand, CO2 production tended to decrease as hydrogen was added to reduce the overall carbon ratio contained in the mixed diffusion flame of methane, methane-propane, and methane-ethane-propane. This means that the mixed fuel use of LNG-hydrogen in ships may potentially reduce emissions of CO2, a greenhouse gas.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.75-94
• /
• 2011

In this paper, we explore the information diffusion mechanism under social network environments by investigating the effect of message characteristics on the volume and speed of retweeting in Twitter, a popular online social media service. To this end, we select eight main keywords (i.e., '무상급식', '반값등록금', '나가수', '평창', '김연아', '박태환', '아이폰', '갤럭시') that have been popular on online social media in recent days. Each keyword represents various social aspects of Korea that recently grab people's attention such as political issues, entertainment, sports celebrities, and the latest digital products, and eventually holds distinctive message characteristics. Analyzing the frequency and velocity of retweeting for each keyword, we find that more than half of the sample messages posted on Twitter contain personal opinions for the certain keyword, but we also find that the tweets which include objective messages with hyperlink are the fastest ones when being retweeted by other followers. In overall, when being retweeted, the group of messages related to the certain keyword present distinctive diffusion patterns and speed according to message characteristics. From academic perspective, the findings in the study broaden our theoretical knowledge of information diffusion mechanism over online social media. For practitioners, the results also provide managerial implications regarding how to strategically utilize online social media for marketing communications with customers.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.35-39
• /
• 2012

This paper analyzes the combustion diffusion pattern when a water purifier is artificially ignited outside and inside in order to provide data to examine the cause of fire of a water purifier damaged by fire. The analysis result of the combustion diffusion pattern of a water purifier shows that the combustion diffused at a higher speed when it was ignited inside the purifier than when ignited outside. It took approximately 360 seconds for the water purifier to be half-burned when ignited on the outside, and approximately 180 seconds when ignited from inside. That is, it is thought that the internal combustion speed is higher because the internal ignition causes the generated heat to be accumulated and radiated instantly. It was observed that the water purifier damaged by fire caused by external ignition showed a uniform carbonization pattern and the carbide burned down at the bottom were gradually deposited. The water purifier damaged by internal ignition showed a relatively clear boundary of carbonized surface, which formed a V-pattern. The difference in the combustion patterns presents an objective base from which to determine where the fire started. By the time the purifier was half-burned by fire, the built-in fuse had not melted and the power supply protection device did not operate. In addition, as was found in the case of the fuse damaged by a general fire, carbonization occurred at the metal holder, and it is thought that this fact may be used as a basis from which to determine the cause of a fire.

• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.43-48
• /
• 2014

The purpose of this study is to analyze the flame propagation speed, radiation range, diffusion pattern and combustion completion time of a fire by filling a divided space with single combustible substance. It was found that the flame propagation speed was the fastest (0.2 s) for kerosene and the lowest (82.1 s) for alcohol. In the case of paint thinner, it took 19.0 s for the flame to reach its peak at the fastest speed after ignition while in the case of alcohol, it took 138.6 s for the flame to reach its peak at the lowest speed. In the case of the combustion of 200 ml of flammable liquids, the combustion completion time was 79.9 s for paint thinner, which is the shortest, 135 s for gasoline, 170 s for kerosene, 231.4 s for diesel and 337.0 s for alcohol. In addition, when flammable liquids are combusted, the lower part of the flame is governed by laminar flow pattern and the upper part of the flame showed turbulence pattern. In the case of a test performed for bean oil, it could be seen that if the fire source was removed, the flame was automatically extinguished without further combustion and that white smoke was generated due to incomplete combustion.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.264-268
• /
• 1990

A guided-wave electro-optic Mach-Zehnder interferometric modulator was fabricated on X-cut LiNbO3 . The channel waveguides were formed by proton diffusion with self-aligned SiO2-cladding. A mach-Zehnder interferometric modulator with arm lengths of 7mm has been fabricated and tested at 0.6328${\mu}{\textrm}{m}$. Its modulation depth with V$\pi$ of only 3.5V was 85% and the 3dB bandwidth was 1.6KHz. For high speed operation, the electrode dimension should be reduced to have smaller R, L, and C.