• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.56-62
• /
• 2015

Using an optical 3D scanning device to collect data from a diffused reflection surface is very difficult. To solve this problem, there are many applications including a spray-type developer and silicon molds. However, using a developer can cause chemical reactions between objects and particles of the developer and uneven surfaces on the object. To overcome these problems, we suggest an electrostatic powder coating method for even coating of particles onto surfaces for collecting 3D shape data. We have developed an automatic, electrostatic powder-coating machine and performed three different experiments to compare this system with a laser interferometer and a T-scan 3D scanner. As a result, we could ascertain the various characteristics of this new method, including good sensitivity for the various surface states of the bare surface, developer, and electrostatic powder coating. Finally, we verified the outstanding scanning performance and were able to demonstrate that this method achieves quality than traditional methods.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2010

Most of the research in the multi-touch area is based on the FTIR(Frustrated Total Internal Re리ection), which is just implemented by using the previous approach. Moreover, there are not the software solutions to improve a performance in the multi touch-blobs detection or the user gesture recognition. Therefore, we implement a multi-touch table-top display that is based on the DI(Diffused Illumination), the improved touch-points detection and user gesture recognition. The proposed method supports a simultaneous transformation multi-touch command for objects in the running application. Also, the system latency time is reduced by the proposed ore-testing method in the multi touch-blobs detection processing. Implemented device is simulated by programming the Flash AS3 application in the TUIO(Tangible User Interface Object) environment that is based on the OSC(Open Sound Control) protocol. As a result, Our system shows the 37% system latency reduction, and is successful in the multi-touch gestures recognition.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.101-104
• /
• 2007

There is no overall understanding about the road marking situation in Korean national highway nowadays. In addition road marking increases risk in traffic accidents especially while it's raining at night because of diffused reflection. So administrator has a lot of problems to maintain and make a decision about the road marking. In this paper, literature review and field investigation about the road marking are carried out from the viewpoint of road safe and the propriety in retroreflective performance of the road marking is grasped. Also, improvement methods about retroreflective performance of the road marking are proposed on the basis of the result in field investigation.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.580-582
• /
• 2004

As the demand of large and high-resolution display panels is increased, the black light units (BLU) of the display devices play an important roles. In this study we'll deal with various defects of BLUs. Patterns of defects can be classified by the scratches, the non-uniform misprinting for the diffused reflection, the surface stains, spots and etc. Due to these distorted patterns the high-resolution and high-precision could be impeded. We'll propose the visual inspection system to detect various defects by pattern-matching.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.5
• /
• pp.727-738
• /
• 1994

It has been representing the delicate changes which express new sentiments through the floating, fluid, free look with the transparent, sheer material in fashion during the early 1990's. The concept of lightness is selected to describe the phenomenon of recent fashion. The purpose of this study is to identify the distinctive characteristics of lightness as external forms and internal meaning in fashion of the early 1990's. The data were collected from fashion magazines such as American Vogue, Italian Vogue from 1987 to 1994. The characteristics of lightness of fashion in the early 1990's are as follows; The external forms are consisted of the material such as the transparent, sheer, soft material, of slim and bell silhouette which occupying the more space in bottom, of the drapery, pleats to shape the unfitted look and is identified as the open, whole, indeterminate and planar intergration form according to the category of clothing form suggested by Belong. It is also the reflection of the social changes which is getting out of the modernity. It is the results of the dominant social state which are diffused the sensual pleasures, transitoriness.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.399-403
• /
• 1993

Si(111)7 $\times$ 7 위에 Mg를 흡착시켜 표면구조의 변화를 RHEED(Reflection High Energy Electron diffraction) 와 XPS(X-ray PhotoelectronSpectroscopy)를 이용하여 연구하였다. RT ~20$0^{\circ}C$까지의 기판온도에서 증착량의 증가에 따라 표면구조는 (7$\times$7)에서 diffused (1$\times$1) 그리고 (2 3 3 $\times$2√3√3-R30$^{\circ}$) 구조로 변화하였다. 또한, 기판온도를 증가시킴에 따라 (1$\times$1), three domain(3$\times$1) 등의 구조를 볼 수 있었고, 특히 , $450^{\circ}C$의 기판온도에서는 single domain (3$\times$1) 구조를 최초로 관측하였다. 이렇게 형성된 각 구조에 대한 Mg KLL과 Si2p의 XPS peak intensity ratio를 증착량의 증가에 따라 측정하여 각기 다른 온도에서의 Mg 성장에 대한 메카니즘을 제시하였다.

• Korean Journal of Materials Research
• /
• v.23 no.3
• /
• pp.194-198
• /
• 2013

In this paper, we studied a p-type reflector based on indium tin oxide (ITO) for vertical-type ultraviolet light-emitting diodes (UV LEDs). We investigated the reflectance properties with different deposition methods. An ITO layer with a thickness of 50 nm was deposited by two different methods, sputtering and e-beam evaporation. From the measurement of the optical reflection, we obtained 70% reflectance at a wavelength of 382 nm by means of sputtering, while only 30% reflectance resulted when using the e-beam evaporation method. Also, the light output power of a $1mm{\times}1mm$ vertical chip created with the sputtering method recorded a twofold increase over a chip created with e-beam evaporation method. From the measurement of the root mean square (RMS), we obtained a RMS value 1.3 nm for the ITO layer using the sputtering method, while this value was 5.6 nm for the ITO layer when using the e-beam evaporation method. These decreases in the reflectance and light output power when using the e-beam evaporation method are thought to stem from the rough surface morphology of the ITO layer, which leads to diffused reflection and the absorption of light. However, the turn-on voltage and operation voltage of the two samples showed identical results of 2.42 V and 3.5 V, respectively. Given these results, we conclude that the two ITO layers created by different deposition methods showed no differences in the electric properties of the ohmic contact and series resistance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.34-41
• /
• 2009

The latest vehicle yields a superior safety and reduction of driving burden by monitoring the driving state of vehicle and its environment with various sensors. To detect other vehicles and objects of the rear left and right-side blind spot area of driver, provide the information about a existence of objects inside the blind spot, and give a signal to avoid collision, this study proposes the intelligent outside rear-view mirror system. This task has substantially complicated several factors. For example, the size, geometry and features of the various vehicles which might enter the monitored zone is varied widely and therefore present various reflective characteristics. This study proposes the optimal specification and configuration of optical system and IR array sensor of blind spot detection system, and shows the results of the performance evaluation of developed system.

• Korean Institute of Interior Design Journal
• /
• v.20 no.5
• /
• pp.13-22
• /
• 2011

The purpose of this study is to analyze Alva Aalto's libraries for understanding his efficient induction of natural light. To fulfill this purpose, Alvar Aalto's thought about library and natural light are examined through his working years and building types. The comparison of his libraries on usage of natural light shows different ways of natural light induction based on different locations and programs of libraries. Similarities and differences of Alvar Aalto's library architecture have strong relationship to the usage of natural light in libraries because Alvar Aalto himself regard reading as the core function of library and the efficient use of natural light is the main key of reading. In his natural light planning, regional characteristics including environmental factors and programmatic differences act as a basic standard for natural light plan. Especially, altitude of sun and its path, seasonal features affect the induction way of natural light. While conical skylights used at Viipuri library shows the characteristics of universality in Modernism architecture, later libraries presents not only various kinds of pan-shape plan but different ways of inducing natural light in according to appropriate function. From conical skylight to monitor with curved reflection wall make it possible shed diffused light to reading space and this affects to form Alvar Aalto's organic architecture. As a result, using natural light in Alvar Aalto's library architecture act as the core of forming library concepts and their development.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.283-290
• /
• 1999

The $n^+/p/p^+$ junction PERL solar cell of $0.1{\sim}2{\Omega}{\cdot}cm$ (100) p type silicon wafer was fabricated through the following steps; that is, wafer cutting, inverted pyramidally textured surfaces etching by KOH, phosphorus and boron diffusion, anti-reflection coating, grid formation and contact annealing. At this time, the optical characteristics of device surface and the efficiency of doping concentration for resistivity were investigated. And diffusion depth and doping concentration for n+ doping were simulated by silvaco program. Then their results were compared with measured results. Under the illumination of AM (air mass)1.5, $100\;mW/cm^2$ $I_{sc}$, $V_{oc}$, fill factor and the conversion efficiency were 43mA, 0.6 V, 0.62. and 16% respectively.