• 한국멀티미디어학회논문지
• /
• 제22권2호
• /
• pp.186-193
• /
• 2019

Visible light communication technology is being studied and developed in various ways due to advantages such as high transmission speed, excellent positioning and higher security. However, existing visible light communication systems have difficulties in entering the market because they use special transmitters and receivers. We will overcome the difficulty if we develope a VLC system that uses a conventional LED light as a transmitter and a smartphone camera as a receiver. What matters is that LED lights include a scatter filter to prevent glareness for human eyes, but the existing VLC(Visual Light Communication) method can not be applied. In this paper, we propose a method to encode data with On / Off patterns of LEDs in the lighting with $M{\times}N$ LEDs. We defined parameters like L-off-able and K-seperated to facilitate the recognition of On / Off patterns in the diffused Lights. We conducted experiments using an LED lighting and smart phones to determine the parameter values. Also, the maximum transmission rate of our encoding technique is mathematically presented. Our encoding scheme can be applied to indoor and outdoor positioning applications or settlement of commercial transactions.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.676-681
• /
• 2015

Recently many studies being carried out to increase the light efficiency of LED. The external quantum efficiency of LED, generally the light efficiency, is determined by the internal quantum efficiency and the light extraction efficiency. The internal quantum efficiency of LED was already reached to more than 90%, but the light extraction efficiency is still insufficient compared with the internal quantum efficiency because the total internal reflection is generated in the interface between the LED chip and air. Thus, we studied about flip chip LED with PSS and performed the optical simulation which find more optimized PSS for flip chip LED to increase the light extraction efficiency. Decreasing of the total internal reflection and effect of diffused reflection according to PSS improved the light extraction efficiency. To get more higher the efficiency, we simulated flip chip with PSS that the parameters are arrangement, edge spacing, radius, height and shape of PSS.

• 정보통신설비학회논문지
• /
• 제9권3호
• /
• pp.80-85
• /
• 2010

In this paper, we present an algorithm for efficient control of backlight LED in order to reduce the power consumption of LCD TV. In addition, a pragmatic implementation method is presented. In conventional local dimming control, backlight LEDs of LCD TV are divided into $M{\times}N$ blocks. And, the proper luminance for each block is computed according to input image and used for dimming control. But, LED light of each block is diffused and affects the neighboring blocks, so that luminance of each block becomes larger than that of intent. In the proposed algorithm, dimming control values are reduced by the amount of quantity affected by the neighboring blocks using light spread function, resulting in additional reduction of power consumption.

• 한국통신학회논문지
• /
• 제35권8B호
• /
• pp.1204-1210
• /
• 2010

본 논문에서는 LCD TV의 전력 절감을 위해 빛 확산 함수(Light Spread Function)을 이용한 LED BLU(Backlight Unit)의 디밍 제어 알고리즘을 제안하고, 효율적으로 구현할 수 있는 방법을 제시한다. 기존의 이차원 디밍 제어 알고리즘은 BLU의 LED를 MxN개의 블록으로 분할하고, 각 분할 영역에 해당하는 입력 영상에 따라 백라이트의 밝기를 계산하여 디밍 제어를 수행한다. 그러나, 각 블록의 LED 빛은 확산되어 인접 블록에 영향을 주기 때문에 각 블록의 최종 휘도는 디밍 제어 값보다 크게 된다. 제안된 알고리즘은 빛 확산 함수를 이용하여 각 블록이 인접 블록으로부터 영향 받는 양 만큼 줄인 디밍 제어 값을 사용함으로써, 기존의 알고리즘보다 더 많은 전력 절감이 가능해진다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.562-565
• /
• 2002

Recent technologic innovations have created possibilities for restorative dentistry, such as computer-aided design and computer-aided manufacturing. This article presents a CAD process that has been developed for the fabrication of dental restorations. This process uses a 4-axes driving mechanism and an improved optical displacement sensor, successfully applied in other industries. In optical displacement sensor, the light beam emitted from the LED is converged through the light source lenses and thrown on the object to be detected. When the light beam is reflected from the object, however, it is diffused. The diffused light beam is converged again by the receiver lenses and cast on the optical position detector element as a small spot.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.510-513
• /
• 2003

Our Zn diffusion into n-type $GaAs_{0.40}P_{0.60}$ used ampoule-tube method to increase IV. N-type epitaxial wafers were preferred by $H_2SO_4$-based pre-treatment. $SiO_2$ thin film was deposited by PECVD for some wafers. Diffusion times and diffusion temperatures respectability are 1, 2, 3 hr and 775, $805^{\circ}C$. LED chips were fabricated by the diffused wafers at Fab. The peak wavelength of all chips showed about $625{\sim}650\;nm$ and red color. The highest IV is about 270 mcd at the diffusion condition of $775^{\circ}C$, 3h for the wafers which didn't deposit $SiO_2$ thin films. Also, the longer diffusion time is the higher IV for the wafers which deposit $SiO_2$ thin films.

• 청정기술
• /
• 제6권1호
• /
• pp.71-78
• /
• 2000

본 연구는 광합성 균주인 C. thiosulfatophium을 이용한 황화수소의 생물학적 탈황공정시 광에너지를 저감시키기 위해 광원의 종류와 광조사 유형에 따른 탈황효율을 조사하였다. 광에너지를 저감시키기 위해서는 반응기내 광분산 효율을 극대화시켜야 한다. 광이용효율을 높이기 위해, 세균농도와 생성부산물의 증가에 의한 빛의 산란과 흡수가 세균성장에 미치는 영향에 관한 연구와 미생물이 필요로 하는 파장의 빛을 최대로 공급하기 위해 LED, 백열등, 태양광 등을 이용한 광원의 최적화 연구, 그리고 외부조사형 광반응기의 광투과 효율의 한계를 극복하기 위한 광섬유를 이용한 내부조사형 광반응기에 대한 연구를 수행하였다.

• 반도체디스플레이기술학회지
• /
• 제20권1호
• /
• pp.77-82
• /
• 2021

Using a multi-array needle module developed for coating of high-density cylindrical microlens array (C-MLA), we have fabricated an anti-Moiré filter for LED screens. The Moiré phenomenon appears due to the interference between the array pattern of image sensors in a camera and the non-emission area (grid pattern) of a LED screen. To suppress it, we have employed poly(methyl methacrylate) (PMMA) and coated it on a glass substrate in the form of a grid and non-grid (parallel lines). We have rotated the needle module in order to increase the number of C-MLAs. With this scheme, we have fabricated the 150 mm × 150 mm anti-Moiré filters where 836 microlens lines are formed. They show the average width of 255.4 ㎛, the average distance between CMLs of 94.6 ㎛, and C-MLA width non-uniformity of 4.7%. We have shown that the Moiré patterns still appear in the presence of the parallel (non-grid)-type filter, whereas they disappeared completely by the grid-type filter. It is due to the fact that the Moiré patterns are diffused more effectively by the grid-type C-MLA.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.63-66
• /
• 2003

To diffuse Zn at solid-state, the $SiO-2$/ZnO/$SiO_2$ wafers was made by PECVD and RF Sputter. Thicknesses of bottom $SiO_2$ and cap $SiO_2$ was about 500 ${\AA}$ and about 3500 ${\AA}$. Diffusion temperatures were $760^{\circ}C$, $780^{\circ}C$, and $800^{circ}C$, and diffusion times were 1, 2, 3, 4, 5, and 6 hr. LED chips were fabricated by the diffused wafers at Fab. The peak wavelength of all chips showed about 625~650 nm and red color. Main reason for Iv change was by diffusion temperature not diffusion time. The lower temperature was the higher Iv. We thick that these properties is because of the very high diffusion temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.59-62
• /
• 2003

Our Zn diffusion into n-type $GaAs_{0.60}P_{0.40}$ used ampoule-tube method to increase IV. N-type epitaxial wafers were preferred by $H_2SO_4$-based pre-treatment. $SiO_2$ thin film was deposited by PECVD for some wafers. Diffusion times and diffusion temperatures respectability are 1, 2, 3 hr and 775, $805^{\circ}C$. LED chips were fabricated by the diffused wafers at Fab. The peak wavelength of all chips showed about 625~650 nm and red color. The highest IV is about 270 mcd at the diffusion condition of $775^{\circ}C$, 3h for the wafers which didn't deposit $SiO_2$ thin films. Also, the longer diffusion time is the higher IV for the wafers which deposit $SiO_2$ thin films.