• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.40-45
• /
• 2008

This paper presents a linear positioning system and its control algorithm design with nano accuracy/resolution. The basic linear stage structure is driven by an ultrasonic motor and its displacement feedback is detected by a LDGI (Laser Diffraction Grating Interferometer), which can achieve nanometer resolution. Due to the friction driving property of the ultrasonic motor, the driving situation differs in various ranges along the travel. Experiments have been carried out in order to observe and realize the phenomena of the three main driving modes: AC mode (for mm motion), Gate mode (for ${\mu}m$ motion), and DC mode (for nm motion). A proposed FCMAC (Fuzzy Cerebella Model Articulation Controller) control algorithm is implemented for manipulating and predicting the velocity variation during the motion of each mode respectively. The PCbased integral positioning system is built up with a NI DAQ Device by a BCB (Borland $C^{++}$ Builder) program to accomplish the purpose of an intelligent nanopositioning control.

• 천문학논총
• /
• 제19권1호
• /
• pp.65-70
• /
• 2004

An imaging spectrograph concept optimized for extended far-ultraviolet emission sources is presented. Although the design was originally developed for FIMS aboard the first Korean science satellite STSAT-l launched on September 27, 2003, no rigorous theoretical background of the spectrograph design has been published. The spectrograph design employs an off-axis parabolic cylinder mirror in front of a slit that guides lights to a diffraction grating. The concave grating provides moderate spatial resolution over a large field of view. This mapping capability is absent in most astronomical instruments but is crucial to the understanding of the nature of a variety of astrophysical phenomena. The aberration theory presented in this paper can be extended to holographic gratings in order to improve the spatial as well as the spectral resolutions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.164-168
• /
• 1996

The relation between crystallinity and thermal history in low density polyethylene thin films and their effect on electric conduction phenomena and dielectric breakdown was studied. The low density polythylene thin films obtained by the solution growth method heat-treated at 140[$^{\circ}C$] for 2 h and subsequently cooling to various ways. The degree of crystallinity was estimated by the X-ray diffraction measurement for the specimen of slowly cooling, ICE quenching and liquid nitrogen quenching. The result shows that the crystallinity decreases become faster as the cooling speed increased, and that conduction phenomenon is governed by the space charge limited current in high field. It was found that the dielectric breakdown field increases with an increase in cooling speed and test number in self-healing breakdown method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.253-256
• /
• 2000

This paper describes a DSP implementation of a real-time 3D sound localization algorithm with the use of a low power embedded DSP. A distinctive feature of this implementation is that the audible frequency band is divided into three, in accordance with the sound reflection and diffraction phenomena through different media from a certain sound source to human ears, and then in each subband a specific implementation procedure of the 3D sound localization is devised so as to operate real-time at a low frequency of 50MHz on a 16bit fixed-point DSP. Thus out DSP implementation can provide a listener with 3D sound effects through a headphone at low cost and low power consumption.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1174-1176
• /
• 1993

Morphology of low density polyethylene(LDPE) such as the degree of crystallinity changes with thermal history etc. In order to clarify the effects of morphological changes on electrical breakdown, we studied direct current and impulse breakdown phenomena of LDPE films heat-treated at 100[$^{\circ}C$] for 1[H] in silicone oil and subsequently cooling to various ways. The degree of crystallinity was estimated by the infra red absorption and X-ray diffraction measurements for the specimens of slowly cooled, cooled in water, original, and cooled in liquid nitrogen gas. As the result, we obtained that the first, second, third, and fourth was slowly cooled of 70.23[%], cooled in water of 61.6[%], original specimen of 56.75[%], and cooled in liquid nitrogen gas of 34.7[%] respectively. The crystalline size and distribution of specimens were researched by Differential scanning calolimeter measurements.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.113-116
• /
• 2006

AC-electroosmosis is one of the electrokinetic forces leading to phenomena peculiar in the microfluidics. This paper shows particle deformation in the microchannel with rectangular electrodes on the bottom wall for the AC-electroosmotic flows. We make a PDMS microchannnel with ITO electrodes To measure velocity distributions of the particles we used a three-dimensional particle tracking velocimetry (micro-PTV) technique this method is Particle tracking by interpolation the diffraction pattern ring diameter variations with the defocusing distances of base particle locations. we induce a function of frequency at the electrode. We find the velocity of particles is the most at the edge of the electrodes and Particles move to side wall or center of the channel for the bottom and middle.

• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.947-951
• /
• 1998

$K_2NiF_4$-type layered compounds of the ($C_nH_{2n+1}NH_3)_2SnCl_4$ (n=2, 4, 6, 8, and 10) system have been synthesized from a stoichiometric mixture of $SnCl_2$ and alkyl ammonium salt using a low temperature solution technique under the inert atmosphere condition. Their crystal structures are assigned to the orthorhombic system by X-ray powder diffraction analysis. The a and b cell parameters show small changes. However, the c parameter is varied significantly according to the increment of alkyl chains of the organic layer which is located between inorganic layers in the compounds. The conformational phase transitions of the compounds are studied by the DSC in the temperature range of 300 to 500 K. FT-IR and Raman spectra are analyzed in the ranges of 1300 to 4000 cm-1 and of 50 to 360 $cm^{-1}$ with Ar-laser (λ=514.5 nm) excitation, respectively. Photoluminescence phenomena are observed for some compounds. The bond-length of Sn-Cl is determined by the EXAFS spectroscopic analysis.

• 열처리공학회지
• /
• 제34권6호
• /
• pp.281-286
• /
• 2021

Arc ion plating (AIP), laser cladding, and nitriding are methods that can prevent mold damage or repair and create cracks and breakages on the die surface. The dissolution and soldering behavior of coated SKD61 by using arc ion plating, laser cladding, and nitriding was investigated. The structure of the coating was investigated as a function of deposition conditions by X-ray diffraction and the crystallographic orientation was determined using the texture factor. The TiAlN film deposited with AIP showed excellent corrosion resistance in the molten aluminum alloy at 680℃. In this paper, we have detailed the corrosion and mass loss phenomena associated with these steel-cast metal interactions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권5호
• /
• pp.103-113
• /
• 1996

The properties of the deposited film depend on the deposition condition and these, in turn depend critically on the morphology and crystal orientation of the films. Therefore, it is important to clarify the nucleation occurrence and growth stage of the morphology and orientation of the film affected by deposition parameters, e.g. the gas pressure and bias voltage etc. In this work, magnesium thin flims were prepared on cold-rolled steel substrates by a thermo-eletron activation ion plating technique. The influence of nitrogen gas pressure and substrate bias voltage on their crystal orientation and morphology of the coated films were investigated by scanning electron microscopy (SEM) and X-ray diffraction, respectively. The diffraction peaks of magnesium film became less sharp and broadened with the increase of nitrogen gas pressure. With an increase in nitrogen gas pressure, flim morphology changed from colum nar to granular structure, and surface crystal grain-size decreased. The morphology of films depended not only on gas pressure but also on bias voltage, i.e., the effect of increasing bias voltage was similar to that of decreasing gas pressure. The effect of crystal orientation and morphology of magnesium films on corrosion behaviors was estimated by measuring anodic polarization curves in deaerated 3%NaCl solution. Magnesium, in general, has not a good corrosion resistance in all environments. However, these magnesium films prepared by changing nitrogen gas pressure showed good corrosion resistance. Among the films, magnesium films which exhibited granular structure had the highest corrosion resistance. The above phenomena can be explained by applying the effects of adsorption, occlusion and ion sputter of nitrogen gas.

• 한국미생물·생명공학회지
• /
• 제18권4호
• /
• pp.352-359
• /
• 1990

분쇄마찰매체효소반응계에서 glucoamylase와 Alpha-amylase의 보완작용에 의한 옥수수 생전분의 효소당화 mechanism을 규명코자, 분리.정제된 상기 효소의 혼합 비율에 따른 당화양상 및 생성당 조성, 전분입자 구조, 생전분입자의 particle size 분포, X-ray 회절양샹의 변화 등을 관찰하였다. 분쇄마찰매체 효소반응계에서도 효소를 분리하여 사용하였을 때보다 glucoamylase와 $\alpha$-amylase를 혼합사용할 경우 당화율이 크게 향상되었으며, 고순도의 glucose 생산에 적합한 두 효소의 혼합비율은 약 1:1-1:2(unit) 로 판명되었다.