• Carbon letters
• /
• v.2 no.1
• /
• pp.22-26
• /
• 2001

Na alloyed graphite intercalation compounds with stage 1 and 2 were synthesized using the high temperature and pressure technique. Thermal stability and staging transitions of the compounds were investigated depending on heating rates. The thermal stability and temperature dependence of the deintercalation compounds were characterized using differential scanning calorimeter (DSC) analyzer. Enthalpy of formations were confirmed at temperatures between 25 and $500^{\circ}C$, depending on the various heating rates. The structure ions and interlayer spaces of the graphite were identified by X-ray diffraction (XRD). Diffractograms of stages with non-integral (00l) values were obtained in the thermal decomposition process, and stacking disorder defects and random stage modes were observed. The average value of the interlayer C-C bond lengths were found approximately $2.12{\AA}$ and $1.23{\AA}$ from the diffractions. Based on the stage transition, the degree of the deintercalaton has a inverse-linear relationship against the heating rate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.426-426
• /
• 2008

Blend membranes were prepared by solvent casting method from sulfonated fluorinated poly(arylene ether)s (SDFF) and chemically modified polyvinylidene fluoride (mPVdF) in isopropanol and were evaluated as proton exchange membrane electrolytes in PEMFC. $^1H$-NMR, differential scanning calorimeter and thermogravimetric analysis was utilized to characterize the structure of the blend membranes (SDFF/mPVDF) and effects of mPVDF content on the properties of the membrane such as water uptake and proton conductivity were also investigated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.527-536
• /
• 1995

Analysis of pultrusion process for the thermosetting composites containing volatiles was performed. Degree of cure, amount of volatile evolved and pulling force were calculated for the processing variables such as die temperature and pulling speed. Cure kinetics was modeled from the data obtained by DSC(Differential Scanning Calorimeter). The volatile evolution kinetics was modeled from the data by DSC as well as TGA(Thermo Gravimetric Analyzer). The cure kinetics and volatile evolution kinetics models were incorporated into the energy equation. The resulting governing equation was solved using finite element method. Pulling force was calculated through the analysis of pressure developed inside the pultrusion die. Experiments were performed and the data were compared with the calculated results. Good agreements were observed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.3
• /
• pp.319-327
• /
• 1983

The thermal diffusivity one of the series of standard pieces for spark test are determined by the flash method. The standard pieces are composed with carbon steels, structural carbon steels, alloy steels and high speed tool steels. In order to compute the thermal conductivity of the standard pieces, their specific heats are measured by a differential scanning calorimeter. The thermal conductivities are calculated from the data of specific heat, density and thermal diffusivity. To increase the accuracy of data for the thermal diffusivity by data reduction excursion method in the flash method, the governing heat diffusion equation, which is closely described experimental conditions with the finite pulse and the heat loss from the sample surfaces, is solved. In this analysis an integral transform is used.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.4
• /
• pp.393-398
• /
• 2007

We investigated heat stability of epoxy resin products and epoxy resin according to the influence hardener. The heat flow which shows the degree of thermal decomposition of the epoxy resin product and epoxy resin measured by using the differential scanning calorimeter (DSC). As a result, we found that in the case of heat stability for epoxy resin as hardener was added, the ratio of one to one (epoxy resin : hardener) was the most suitable in air condition and nitrogen atmosphere.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.1
• /
• pp.27-32
• /
• 2003

The core-shell latex particles were prepared by sequential emulsion polymerization of alkyl methacrylate and styrene(ST) by using an water-soluble initiator(APS) after preparing monomer pre-emulsion in the presence of an anionic surfactant(SDBS). In organic/organic core-shell polymerization, the pre-emulsion method, which minimized required quantity of sulfactant, has been used to increase the conversion rate and the stability of core-shell latex particles as well as to reduce the formation of secondary particle that cause problems of soap-free emulsion during shell polymerization. We used several methods to observe the core-shell structure. The core-shell structure was studied by measuring pH change during hydrolysis by NaOH, glass transition temperature($T_g$) by differential scanning calorimeter(DSC), morphology of latex by transmission electron microscope(TEM) and change of particle size and distribution by a particle analyzer.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.175-182
• /
• 2010

Various research on the surface of the skin and the relationship between epidermis and composition of ion have been performed. Traditionally, bamboo extract was used as an important material for enhancing healthy condition of a skin. Bamboo salt is well known as one of the most famous traditional medical treatments. In this study, we investigated the stability of P/S (Polyol-in-Silicone) emulsions containing a fair amount of bamboo salt in the range of 0.5~5.0 wt%. For improving the stability of emulsions, we varied the quantity of fatty alcohol and wax ester in emulsions and the stability was checked using DSC (Differential Scanning Calorimeter). We also studied the efficacy of treating the P/S emulsions containing bamboo salt. From the experiment, the emulsions show the mitigation of stimuli, enhancing the skin hydration and improving the appearance of the skin.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.371-375
• /
• 2011

전지는 고에너지 밀도 제품으로 화학에너지를 전환시켜 전기에너지를 운반하는 것이다. 본 실험에서는 리튬 이온전지의 열적 안정성의 위험을 평가하기 위하여 리튬이온 전해액을 Differential Scanning Calorimeter(DSC)와 modified cloed pressure vessel test(MCPVT)로 분석하였다. 실험 결과 리튬전지는 다른 전지보다 위험하며, 전지를 잘못 사용하면 열적 반응성은 연소성 물질인 전해질을 포함하고 이것이 열을 발생시켜 폭발하거나 화재가 발생할 수 있음을 제시하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.555-555
• /
• 2012

The thermal stability of poly(sodium 4-styrenesulfonate) intercalated graphite oxide has been investigated using a differential scanning calorimeter. The poly(sodium 4-styrenesulfonate) intercalated graphite oxide composite shows a prominent exothermic reaction near $207^{\circ}C$ and an endothermic reaction near $453^{\circ}C$. Graphite oxide is responsible for the exothermic reaction while the endothermic reaction is caused by the poly(sodium 4-styrenesulfonate) used in the synthesis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide. The onset temperature of the exothermic reaction of poly(sodium 4-styrenesulfonate) intercalated graphite oxide decreased by $92^{\circ}C$ in comparison with that of graphite oxide, indicating the addition of poly(sodium 4-styrenesulfonate) in the composite has diminished the thermal stability of graphite oxide.

• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.4
• /
• pp.219-231
• /
• 1997

Inconel alloys used as nuclear power plant components have experienced intergranular stress corrosion cracking problems inspite of their good corrosion characteristics. In order to investigate the effects of heat treatments on carbide precipitation and intergranular stress corrosion cracking(IGSCC) in Inconel alloys, DSC(Differential Scanning Calorimeter), TEM, EDXS and static potential corrosion tests were carried out. Thermal treatment at $750^{\circ}C$ for 15hours in Inconel alloys increased the density of intergranular carbide. The carbides are mainly $Cr_7C_3$ in Inconel 600, and $Cr_{23}C_6$ in Inconel 690. The Cr depletion around grain boundary is not crucial factor on IGSCC. The carbides in grain boundary play an important role as acting dislocation source, and as decreasing stress around growing crack.