• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.18-24
• /
• 1998

Polyurethane (PU) synthesized from 4,4'-diphenylmethane diisocyanate having high functionality (f=2.9) and polyester polyol have been investigated by differential scanning calorimeter (DSC), dynamic mechanical thermal analyzer (DMTA), and Fourier transform infrared spectroscope (FT-IR). From the DSC measurement of polyurethane, a single transition temperature ($T_g$) was observed. This result indicates that polyurethanes synthesized in this work have homogeneous network structure due to high functionality of diisocyanate. It was also found that the $T_g$ of polyurethane was increased as hard segment content was increased. The results from DMTA measurement are consistent with DSC results. In order to investigate the effect of thermal annealing on the $T_g$ of polyurethane, the samples were annealed at various annealing conditions. $T_gs$ of polyurethanes were found to increased with annealing temperature. From swelling experiment and FT-IR studies, it was found that the $T_g$ was increased as crosslinking density of polyurethane was increased.

• Journal of Adhesion and Interface
• /
• v.15 no.1
• /
• pp.22-30
• /
• 2014

Self-photoinitiating acrylate (SPIA) which can undergo self-initiation under UV irradiation was synthesized by a Michael addition in the presence of a base catalyst. The SPIA polymerizations were investigated by photo-differential scanning calorimeter (photo-DSC) and surface physical properties such as pendulum hardness and pencil hardness. The results showed that the SPIA can cure upon UV irradiation by itself without a photoinitiator. But we found out that both the curing rate and the conversion were too low for the self-curing reaction of SPIA. In order to improve the SPIA curing properties, we introduced the SPIA/cationic hybrid system and observed the effects of the addition of commercial free radical type monomer and photoinitiator on the curing behaviors. SPIA/cationic hybrid system was the best suitable to improve the SPIA curing properties. The kinetic analysis indicated that the cationic monomer and photoinitiator apparently accelerated the cure reaction and rate of the hybrid SPIA system, mostly due to the synergistic effect of cationic monomer and photoinitiator increasing the mobility of active species and the generation of reactive species (free radical, cation) during the photopolymerization process. The physical properties showed that, unlike typical free radical system, the hybrid systems did not show oxygen inhibition effect because of cationic reaction on the coating surface.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.300-305
• /
• 2010

Zaltoprofen is a propionic acid derivative of non-steroidal anti-inflammatory drugs (NSAIDs) and has been widely used in the treatment of a number of arthritic conditions or lumbago. Zaltoprofen has low water solubility and low bioavailability, therefore great efforts have been devoted to enhance the extent of drug adsorption. In this study, zaltoprofen was formulated into a tablet to enhance the bioavailability and to achieve sustained-release using additives such as lactose monohydrate, carboxymethylcellulose (CMC), hydroxypropylmethylcellulose (HPMC). Fourier transform-infrared (FTIR) and differential scanning calorimeter (DSC) were employed to study the structure and crystallization of zaltoprofen in the tablet with various contents of additives. It was found that additives had interactions with zaltoprofen and inhibited the crystallization of zaltoprofen. Tablets containing low viscosity HPMC showed a higher release than those containing high viscosity HPMC. Also, as the amount of CMC increased zaltoprofen release increased.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.135-145
• /
• 2010

In order to enhance overall quality of the Backsulki, a sweet potato flour (SPF) which is rich in sugar and dietary fiber was added into the rice flour at 0, 5, 15, and 25% (w/w, db) ratios. Quality changes of the products were evaluated by storing at 5, 15, and 25$^{\circ}C$ for 4 days. Water binding capacity, swelling power, and solubility of the products increased as the SPF increased. Hunter colorimetric a- and b-value increased while L value of the products decreased as the SPF increased. Retarded retrogradation of the flour mixtures containing the SPF was shown from the DSC thermogram as indicated by the decreased $\Delta$H values. Increases in $T_{i}$ and $T_{p}$ values in relation with the starch gelatinization were shown from the DSC thermogram with a temperature margin of 15-20$^{\circ}C$ as the SPF increased. Increases in softness along with decreases in springiness and chewiness of the products were shown as the SPF increased. It was not so much the storage temperature as the added SPF affected the final texture of the products. Retarded growth of the total microbes of the products was noted by the added SPF during storage at 25$^{\circ}C$ for 3 days. Regarding the above and additional sensory preference scores of the products, a 15%(w/w) level of the SPF was suggested as optimum for the best Backsulki with improved qualities.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.1
• /
• pp.11-18
• /
• 2024

Recently, there have been attempts to claim the hair moisturizing effect for a hair care product, however there has not yet been an official evaluation method because heating temperature for hair has not been established. This study was conducted to establish a quantitative evaluation for hair water content. In order to observe the behavior of water inside hair, heat was applied to hair with various temperatures using thermogravimetric dry residue. As the heating temperature increased, the amount of moisture released from the hair increased. As a result of evaluating hair using a differential scanning calorimeter (DSC), a unique phenomenon in which a rapid endothermic reaction occurs around 75 ℃ was observed. This phenomenon was also observed in different ethnic hair. In hair that damaged the hair cuticle barrier with oxidation and heat, this rapidly rising endothermic reaction temperature occurred at 77 ℃, which was slightly higher, and 73 ℃ was observed when this hair was applied with polar oil, conditioning polymer, or keratin protein. To determine how this reaction affects the hair surface, friction test was performed using an atomic force microscope. When heated above 75 ℃, cuticle friction increased, however when heated above 90 ℃, there was no change in hair cuticle friction. Finally, it was confirmed that around 75 ℃ is the critical temperature at which desorption of water bound to the hair occurs. It is suggested that a heating temperature of 75 ℃ is the optimal temperature for detecting and quantifying the moisture content of hair, and that approximately 10% detected at 75 ℃ can be a standard value for hair moisture content.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.99-108
• /
• 2012

These days, spontaneous ignition phenomena by oxidizing heat frequently occur in the circumstances of processing and storing waste tires. Therefore, to examine the phenomena, in this work, this researcher conducted the tests of fires of fragmented waste tires (shredded tire), closely investigated components of the fire residual materials collected in the processing and storing place, and analyzed the temperature of the starting of the ignition, weight loss, and heat of reaction. For the study, this researcher conducted fire tests with fragmented waste tires in the range of 2.5 mm to 15 mm, whose heat could be easily accumulated, and performed heat analysis through DSC and TGA, DTA, DTG, and GC/MS to give scientific probability to the possibility of spontaneous ignition. According to the tests, at the 48-hour storage, rapid increase in temperature ($178^{\circ}C$), Graphite phenomenon, smoking were observed. And the result from the DTA and DTG analysis showed that at $166.15^{\circ}C$, the minimum weight loss occurred. And, the result from the test on the waste tire analysis material 1 (Unburnt) through DSC and TGA analysis revealed that at $180^{\circ}C$ or so, thermal decomposition started. As a result, the starting temperature of ignition was considered to be $160^{\circ}C$ to $180^{\circ}C$. And, at $305^{\circ}C$, 10 % of the initial weight of the material reduced, and at $416.12^{\circ}C$, 50 % of the intial weight of the material decreased. The result from the test on oxidation and self-reaction through GC/MS and DSC analysis presented that oxidized components like 1,3 cyclopentnadiene were detected a lot. But according to the result from the heat analysis test on standard materials and fragmented waste tires, their heat value was lower than the basis value so that self-reaction was not found. Therefore, to prevent spontaneous ignition by oxidizing heat of waste tires, it is necessary to convert the conventional process into Cryogenic Process that has no or few heat accumulation at the time of fragmentation. And the current storing method in which broken and fragmented materials are stored into large burlap bags (500 kg) should be changed to the method in which they are stored into small burlap bags in order to prevent heat accumulation.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.682-692
• /
• 2013

We investigated out the effect of cultivation region on the physicochemical characteristics of starch in six sweetpotato cultivars. The following sweetpotato cultivars were analyzed: Daeyumi, Shingeonmi, Jinhongmi, Shinyulmi, Yulmi, and Yeonhwangmi. Samples were cultivated in Muan, Iksan, Nonsan, Boryeong and Hamyang. The soil texture was found to be sandy loam in Muan, Iksan, and Boryeong, sandy clay loam in Nonsan, and loam in Hamyang. The starch content of the sweetpotato was higher in Muan than in Hamyang. The amylose content was 22.3-30.9%, and the highest amylose content was found in samples from Iksan. Rapid viscosity analysis showed that the samples from Hamyang had the lowest values of pasting temperature, while samples of the Daeyumi cultivar had the highest values. Thermal analysis with a differential scanning calorimeter showed that the Muan samples had the highest values of onset temperature, maximum peak temperature, and completion temperature, and the samples from Hamyang had the lowest values. There was no difference between the cultivation regions or the cultivar in the X-ray pattern of the starch or its appearance in scanning electron micrographs. Therefore, the results of this study confirm that cultivation region and cultivar play an important role in determining the quality of sweetpotato and the physicochemical characteristics of sweetpotato starch.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.613-619
• /
• 2010

Three varieties of taro flours (Altoran, Josaengjong, and Jaeraejong) were analyzed to evaluate their nutrient composition and physicochemical properties. Moisture contents of the three taro cultivars varied from 5.74-10.30%. Among the three cultivars, Altoran flour had higher protein and fat contents than other cultivars. There were 17 kinds of amino acids in the three taro flours. The major fatty acids in the three taro flours were linoleic acid (46.5-51.4%), palmitic acid (21.7-25.8%), and oleic acid (12.3-18.7%), and two thirds of the total fatty acids were unsaturated fatty acids. Potassium, phosphorus, magnesium, and calcium were the most plentiful minerals in the three taro flours, and the free sugars were glucose, fructose, and sucrose. The total dietary fiber contents of the three taro flours ranged from 12.97 to 17.60%. From these results, Altoran contained a high level of dietary fiber, minerals, essential amino acids, and free sugars. Jaeraejong showed the highest water absorption index. The water soluble index of Altoran was higher than that of the other cultivars. From the differential scanning calorimeter results, the gelatinization temperatures of the three taro flours were $84.98-89.91^{\circ}C$. The pasting temperature of the three taro flours was from 46.77 to $49.30^{\circ}C$ by rapid visco-analyzer. Among these varieties, Josaengjong had the highest peak viscosity and final viscosity, whereas Altoran had the lowest. These taro cultivars are expected to be potential material for application in taro processed foods, due to their gelatination and pasting properties.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.392-398
• /
• 2015

The physicochemical properties of spray-dried rice flour with Lactobacillus plantarum CGKW3 were investigated. Amylose and damaged starch contents of spray-dried rice flour (S10, S20, S30, and S50) with L. plantarum CGKW3 were 14.18~17.75% and 24.65~34.08%, respectively. The particle size of spray-dried rice flour was $82.28{\sim}131.17{\mu}m$. The rice flour with L. plantarum CGKW3 showed a good powder flowability. The water absorption and water solubility of spray-dried rice flour were 1.96~2.13 and 9.91~21.95%, respectively. Thermal properties measured by differential scanning calorimeter revealed that the enthalpy (${\Delta}H$) for starch gelatinization were highest in the rice flour (S50) with L. plantarum CGKW3. When compared, the viable cell number of spray-dried rice flour were found to be in the following order: S10 (5.78 log CFU/g) < S20 (6.38 log CFU/g) < S30 (6.69 log CFU/g) < S50 (7.11 log CFU/g). The survaival rate of L. plantarum CGKW3 was 60.02-73.85%, which reflected the improvement in the quality of rice flour with an increase in treatment concentration. Based on our results, spray-dried rice flour with L. plantarum CGKW3 could be used in various types of rice foods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1336-1342
• /
• 2017

The study examined and compared the physicochemical and characteristics of various rice brand varieties and private brand products on the market. The moisture content in the proximate composition of rice was 15.67~17.03%, crude protein content was 5.73~6.30%, crude lipid content was 0.38~0.95%, and crude ash content was 0.23~0.56 %. Ilmi and Ilpum had high moisture content, whereas Gosihikkari and Hopyeong had high crude protein content. In the Hunter's color value of rice flour, L value was 96.76~97.27, a value was -1.63~-0.63, and b value was 2.00~2.60. The WAI was 1.21~1.39, WSI was 0.63~0.93%, and amylose content was 14.63~20.86%, respectively; Gosihikkari and Ilmi showed the lowest values. The X-ray diffraction patterns of rice flours of all varieties showed an A shape. For the amylogram properties of rice flour, initial pasting temperature was $59.57{\sim}63.23^{\circ}C$, maximum viscosity was 569.00~718.67 B.U. (Brabender Units), breakdown was 303.00~423.67 B.U., and setback was 212.67~265.33 B.U.. For differential scanning calorimeter (DSC) of rice flour, onset temperature was $54.66{\sim}58.63^{\circ}C$, peak temperature was $65.87{\sim}68.14^{\circ}C$, end temperature was $73.37{\sim}75.54^{\circ}C$, and enthalpy was 1.98~2.95 cal/g. The rice varieties with high internal density and initial pasting temperature as well as low crude protein content, WAI, amylose content, and setback can be classified as good. Gosihikkari in Gyeonggi Province, Ilmi and Hopyeong in Jeollanam-do, and Samgwang in Chungcheongnam-do are among them.