• Journal of Gifted/Talented Education
• /
• v.19 no.1
• /
• pp.95-117
• /
• 2009

This study investigated the relationships of the self-regulated learning strategies used in both science and English classes and motivation to academic performance of science-gifted high school students. Participants of this study were 144 freshmen of Korea Science Academy It was found out that the use of self-regulation learning strategies and motivation exerts differential influence on the academic performance of science-gifted students, depending on the subjects they study. Results showed that they used more vigorously in science class those self-regulated strategies which consist of cognition, metacognition, and resource management strategies than in English class. In addition, their motivation level in science class was significantly higher than that in English class. Self-regulated strategies did not explain any variance in physics GPA. Task value among the motivation variables accounted for 2 percent of variance in physics GPA. Metacognition and time and study environment variables explained 8 percent and 15 percent of variance in English GPA, respectively. Self-efficacy in motivation accounted for 30 percent of variance in English GPA, These results were discussed in the light of instruction for science-gifted high students.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.266-271
• /
• 2003

Insoluble polyphenol antioxidants, quercetin and catechin, were stabilized through the complexation with cyclodextrin to increase heat and pH stabilities. Comparison of inclusion complex formabilities of quercetin and catechin with ${\alpha}-,\;{\beta}-$, and ${\gamma}-CDs$ revealed ${\beta}-CD$ to be the most suitable result. Optimal molar mixing ratio of ${\beta}-CD$ and quercetin or catechin for inclusion complex formation was found to be 1 : 1. Inclusion complexation was confirmed using differential scanning calorimetry. Solubility of ${\beta}-CD-antioxidant$ inclusion complexes increased compared with native antioxidants, Stability against temperature and pH of ${\beta}-CD-antioxidant$ inclusion complex analyzed revealed antioxidant activities of ${\beta}-CD-quercetin$ and catechin inclusion complexes have higher stabilization compare to raw quercetin and catechin. Peroxide value of linoleic acid dissolved in water decreased substantionally after using ${\beta}-CD-quercetin$ inclusion complex. ${\beta}-CD-antioxidant$ inclusion complex can be used effectively as a fresh-food preservative.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2010

In clinical data minig, choosing the optimal subset of features is such important, not only to reduce the computational complexity but also to improve the usefulness of the model constructed from the given data. Moreover the threshold values (i.e., cut-off points) of selected features are used in a clinical decision criteria of experts for differential diagnosis of diseases. In this paper, we propose a fuzzy discretization approach, which is evaluated by measuring the degree of separation of redundant attribute values in overlapping region, based on spatial distribution of data with continuous attributes. The weighted average of the redundant attribute values is then used to determine the threshold value for each feature and rough set theory is utilized to select a subset of relevant features from the overall features. To verify the validity of the proposed method, we compared experimental results, which applied to classification problem using 668 patients with a chief complaint of dyspnea, based on three discretization methods (i.e., equal-width, equal-frequency, and entropy-based) and proposed discretization method. From the experimental results, we confirm that the discretization methods with fuzzy partition give better results in two evaluation measures, average classification accuracy and G-mean, than those with hard partition.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.139-148
• /
• 2005

Generally, the brand has its life cycle as the product has. This life cycle is classified into the stages; introduction, growth, maturity and decline. Since the brand is little different from that of the product's, we can find some differences when it applies to the brand. The most effective method to perceive the brand to the consumers is advertisement, therefore in the advertisement design, it is important to figure out the current stage in the brand life cycle and use the most ideal design strategy in that stage. This study suggests the concept of the brand life cycle and the most effective strategy in each stages of the advertisement design. In the stage of the brand introduction, we apply the 'What is it? Strategy' which introduces the brand itself. In the stage of the growth, 'How does it Differ from? Strategy' is suggested as the advertisement strategy emphasizing the positioning which shows its differential competitive advantages among brands because in this stage there are many competitive brands in the market. In the stage of the maturity, we focus on the 'What does it Convey of? Strategy' stressing on the delivery of brand's value to consumers as consumers they purchase the brand. Finally in the stage of the decline, 'What does it Stand for? Strategy' is suggested in order to emphasize the generation of brand's symbolical meaning rather than to emphasize it's attributes or benefits. Therefore the advertisement design needs the contingent ideal design strategy according to the stages of brand life cycle and the effective brand management through it.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.7
• /
• pp.5-13
• /
• 2015

The pressure penetrating steel pipe pile method which can be constructed in a narrow space using the hydraulic jack is used on the foundation reinforcement, extension of the structure and basement, restoration of the differential settlement etc.. This method is possible to construct in narrow areas and low story height, the non-noise and non-vibration works, and it is possible for the construction site to be clean without slime. And it is possible to confirm the bearing capacity of pile due to penetrating the pile with the compression load of hydraulic jack. In this study, the static load test with the load-transfer test was carried out to investigate the bearing behavior characteristics of the pressure penetrating steel pipe pile. Four series of static load test were executed to investigate the variation of bearing behavior of the pressure penetrating steel pipe pile. As a result of these tests, the allowable load of the pressure penetrating steel pipe was evaluated more than 637 kN, and the shaft resistance corresponding to 81~86% of each applied load was mobilized with only a small portion of the base resistance acting. And it was also evaluated that the unit skin friction was mobilized to maximum value after two months.

• Journal of Yeungnam Medical Science
• /
• v.12 no.1
• /
• pp.1-9
• /
• 1995

A monoclonal antibody to PCNA, which can be used on routinely processed tissue, was applied to 25 cases of gastric adenomas and 64 cases of gastric adenocarcinomas in order to diffentiate adenoma and adenocarcinoma and also to evaluate the prognostic value in adenocarcinoma. The results were summerized as follows: The peNA labelling index was $29.14{\pm}12.77%$ in control, $44.09{\pm}17.11%$ in adenoma and $80.15{\pm}10.69$ in adenocarcinoma, resulting in significant increase in adenocarcinoma compared to adenoma. In adenocarcinoma, no significant correlation was observed between PCNA labelling index and histologic grade, and there was increased tendency of PCNA labelling index in proportion to depth of invasion without statistical significance. The PCNA index was significantly increased in advanced adenocarcinoma compared to early gastric carcinoma, and also in positive nodal metastasis group than in negative group. From above results, the PCNA stain will be able to provide a helpful method for the differential diagnosis between gastric adenoma and adenocarcinoma, and could be a useful prognostic factor in adenocarcinoma if other factors are considered together.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.51-69
• /
• 2012

Physical strength of the rock is the most important factor of resistance to erosion and has been measured through various way. Bedrock microforms, like potholes and grooves, are the forms sculpted by the erosional processes of flow and the location and morphology are strongly affected by the differential erosion. It also assumed that the physical strength of the rock controls the erosion rate and mode of erosion. The schmidt hammer has been used to measure the rock strength in the field for the geomorphological research. To find the relationship between the rock strength and microforms, Schmidt hammer's R(rebound) were measured in the Baeksuktan, middle reach of Gilancheon, Cheongsong, Gyungsangbuk do. The overall values of rebound of the local sandstone showed over 65 in most cases, so it can be regarded as 'very strong'. It is found that the rebound values of the rock surface decreased towards current water level. It also, however, found that there was no systematic differences in rebound values among the topographically high and lows in the bedrock surface. There was no statistically significant difference in rebound values of the area with well developed microforms and others. The values of R from the exposed faces and inside of the microforms are similar. In the case of conglomerate, the part with the gravel showed higher values that the parts with sands. The rebound values are decreased near of(<1cm) the geological discontinuities(including joint and faults), so this line of weakness could be the point of initiation of active erosion to form microforms. However there is large variations in rebound values within this part. It also should be mentioned that topological relation between the strike of the geologic discontinuities and flow direction looks control the mode of erosional processes.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.52-57
• /
• 2018

This paper presents the design and cold flow test results of oxidizer-rich preburner injectors for a 9 tonf-class staged combustion engine cycle. Three types of coaxial swirl injectors were designed, and 12 injectors were designed for each type. The diameters of the fuel tangential holes are identical. The diameters of the oxidizer tangential holes were varied to investigate the influence of combustion in the oxidizer-rich preburner according to the momentum ratio of the gas oxidizer generated from combustion in the injector chamber and liquid oxidizer through the cooling channel. It will be verified through a powerpack and combustion test using an oxidizer-rich preburner. In the cold flow test, the fuel flow rate and oxidizer tangential hole flow rate reached the target value based on the designed differential pressure.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.62-62
• /
• 2019

Bacterial leaf blight(BLB), caused by X. oryzae pv. oryzae(Xoo), is one of the most destructive diseases of rice due to its high epidemic potential. Understanding BLB resistance at a genetic level is important to further improve the rice breeding that provides one of the best approaches to control BLB disease. In the present investigation, a collection of 192 accessions was used in the genome-wide association study (GWAS) for BLB resistance loci against four Korean races of Xoo that were represented by the prevailing BLB isolates under Xoo differential system. A total of 192 accessions of rice germplasm were selected on the basis of the bioassay using four isolated races of Xoo such as K1 and K2. The selected accessions was used to prepare 384-plex genotyping by sequencing (GBS) libraries and Illumina HiSeq 2000 pairedend read was used for GBS sequencing. GWAS was conducted using TASSEL 5.0. The TASSEL program uses a mixed linear model (MLM). The results of the bioassay using a selected set of 192 accessions showed that a large number of accessions (93.75%) were resistant to K1 race and K2 resistant germplasm proportion remained between 66.67. The genotypic data produced SNP matrix for a total of 293,379 SNPs. After imputation the missing data was removed, which exhibited 34,724 SNPs for association analysis. GWAS results showed strong signals of association at a threshold of [-log10(P-value)] more than 5 (K1 and K2) for nine of the 39 SNPs, which are plausible candidate loci of resistance genes. These SNP loci were positioned on rice chromosome 2, 9, and 11 for K1 and K2 races. The significant loci detected have also been illustrated and make the CPAS markers for NBS-LRR type disease resistance protein, SNARE domain containing protein, Histone deacetylase 19, NADP-dependent oxidoreductase, and other expressed and unknown proteins. Our results provide a better understanding of the distribution of genetic variation of BLB resistance to Korean pathogen races and breeding of resistant rice.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.71-79
• /
• 2021

In this study, we have successfully fabricated the Sn-Ni paste and evaluated the bonding properties for high-temperature endurable EV (Electric Vehicle) power module applications. From evaluating of the micro-structural changes in the TLPS (Transient Liquid Phase Sintering) joints with Sn and Ni contents in the Sn-Ni pastes, a lack of Ni powders and Ni particle agglomerations by Ni surplus were observed in the Sn-20Ni and Sn-50Ni joints (in wt.%), respectively. In contrast, relatively dense microstructures are observed in the Sn-30Ni and Sn-40Ni TLPS joints. From differential scanning calorimetry (DSC) thermal analysis results of the fabricated Sn-Ni paste and TLPS bonded joints, we confirmed that the complete reactions of Sn with Ni to form Ni-Sn intermetallic compounds (IMCs) at bonding temperatures occurred, and there is no remaining Sn in the joints after TLPS bonding. In addition, the interfacial reactions and IMC phase changes of the Sn-30Ni joints under various bonding temperatures were reported, and their mechanical shear strength were investigated. The TLPS bonded joints were mainly composed of residual Ni particles and Ni₃Sn₄ intermetallic phase. The average shear strength tended to increase with increasing bonding temperature. Our results indicated a high shear strength value of approximately 30 MPa at a bonding temperature of 270 ℃ and a bonding time of 30 min.