• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.646-649
• /
• 2011

Differential detection algorithm for DBO-CSS based on maximum signal energy detection (MSED) using viterbi algorithm is proposed. In order to mitigate SNR degradation caused by differential decoding, a modified viterbi algorithm with so called correlation metric (CM) in every state is proposed. It is shown that the performance gain of the proposed algorithm when compared with that of the conventional differential detection with the block decoding algorithm is about 2.5dB at BER = $10^{-5}$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.65-74
• /
• 2005

It is required for getting the ring laser gyro output purely related to the input rotation to eliminate the output of the modulated angular vibration from the ring laser signal. In this paper we discuss the dither stripping methods of compensating the ring laser signal by converting the rate signal of dither detector from voltage to frequency for a dither type ring laser gyro. We discuss the differential methods for getting rid of the offset of the V-F signal. And we develope the methods of compensating the phase differences between the ring laser signals and the V-F differential signals by using analog integrator and digital time delays. And also, we develope the gain calculation method by comparing the standard deviations of the ring laser signals with V-F differential signals. We implemented these methods and analyzed the effectiveness of these methods by comparing the dither trapping methods.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.223-229
• /
• 2004

Recently, OFDM and STC techniques have been considered to be candidate to support multimedia services in the next generation mobile radio communications and have been developed the many communications systems in order to achieve the high data rates. In this paper, we propose the Trellis-Coded Differential Space Time Modulation-OFDM system with multiple symbol detection. The Trellis-code performs the set partition with unitary group codes. The Viterbi decoder containing new branch metrics is introduced in order to improve the bit error rate (BER) in the differential detection of the unitary differential space time modulation. Also, we describe the Viterbi algorithm in order to use this branch metrics. Our study shows that such a Viterbl decoder improves BER performance without sacrificing bandwidth and power efficiency.

• Proceedings of the Ginseng society Conference
• /
• 2003.12a
• /
• pp.6-6
• /
• 2003

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.51-59
• /
• 2002

In this paper, we studied the voice cryptograph system designed by the SEED algorithm for the safe transmission and receipt on the voice communication. Voice band signal converts to digital signal by the CODEC and DSP that applied the improved SEED algorithm encrypt the digital signal. The CODEC convert Encryption signal into analog voice signal. This voice signal is transmitted safely because of encryption signal even if someone wiretap. Receiver can hear the source voice, because the encryption signal decrypted using the SEED algorithm. In this paper, We designed the 32 round key instead of 16 round key in the SEED algorithm so that we improve the truncated differential probability from $2^{-143.1}$ to $2^{-286.6}$. 

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.89-92
• /
• 2010

A bolometer sensor used in an infrared thermal imaging system has many advantages on the process because it does not need a separate cooling system and its manufacturing is easy. However the sensitivity of the bolometer is low and the fixed pattern noise(FPN) is large, because the bolometer sensor is made by micro electro mechanical systems (MEMS). These problems can be fixed-by using the high performance readout integrated circuit(ROIC) with noise reduction techniques. In this paper, we propose differential delta sampling circuit to remove the mismatch noise of ROIC itself, the FPN of the bolometer. And for reduction of FPN noise, the reference signal compensation circuit which compensate the reference signal by using on-resistance of MOS transistor was proposed.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.942-944
• /
• 2005

In this study, eddy current signals from various anomalous defects in the heat exchanger tube are predicted af their signal slope characteristics no analyzed. The signal changes due to frequency increase are also observed. Based in the accumulated knowledge, the analysis of superimposed signal is attempted which includes the effects of support plate. Both differential and absolute bobbin probe signals are analyzed. For the prediction of signals, axisymmetric finite element modeling is used and this leads us to the utilization of slope angle analysis of the signal. Results show that differential signals are useful to locate the position of defect under the support plate and absolute signals no easy to predict and analyze even though they no superimposed signals. Combined use of these two types of signals will accomplish a reliable inspection.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.657-660
• /
• 2011

Differential detection algorithm for DBO-CSS based on maximum signal energy detection (MSED) using viterbi algorithm is proposed. In order to mitigate SNR degradation caused by differential decoding, a modified viterbi algorithm with so called correlation metric (CM) in every state is proposed. It is shown that the performance gain of the proposed algorithm when compared with that of the conventional differential detection with the block decoding algorithm is about 2.5dB at BER = $10^{-5}$.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.289-292
• /
• 2001

A Novel fully-differential bipolar current-controlled current amplifier(CCCA) for electrically tunable circuit design at current-mode signal processing were designed. The CCCA was consisted of fully-differential subtracter and fully-differential current gain amplifier. The simulation result shows that the CCCA has current input impedance of 0.5 Ω and a good linearity. The CCCA has 3-dB cutoff frequency of 20 MHz for the range over bias current 100$mutextrm{A}$ to 20 ㎃. The power dissipation is 3 mW.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.473-476
• /
• 2002

고도로 발달된 정보화 시대에서 우리가 원하는 정보를 짧은 시간, 적은 비용으로 서로 주고받기 위해서는 이것에 맞는 시스템이 요구된다. 반도체 chip의 대용량과 고속화됨으로써 TTL, LVTTL 등이 data 100Mbps 정도를 안전하게 전달 할 수 있는 능력이 있으므로 그 이상을 전달할 수 있는 새로운 Logic level이 필요하게 되었다. 이에 맞추어 신호 level의 여러 가지 중 본 논문에서는 Virtex II XC2V 1000 FF896을 이용하여 Differential I/O LVDS(Low Voltage Differential Signaling) level 특성을 clock, Data와의 전송 관계를 Eye_Pattern을 통해 살펴보았다.