• Mycobiology
• /
• 제36권1호
• /
• pp.34-39
• /
• 2008

Schizophyllum commune is an edible and medicinal mushroom widely distributed in the world. The optimal growth conditions for the mycelia of 10 strains of the fungus were investigated. The temperature suitable for the mycelial growth and density was obtained at $30{\sim}35^{\circ}C$. Among the tested conditions, the minimum mycelial growth was found at $15^{\circ}C$. In case of pH, the most favorable growth was found at pH 5. The results indicated that this mushroom well adapted to high temperature and low pH for its mycelial growth. Considering growth phenotype of mycelia, Hamada, Hennerberg, PDA and YM were the most suitable and Lilly, Glucose triptone, Glucose peptone and Hoppkins were the most unfavorable among tested media for the mycelial growth of S. commune. Out of tested carbon sources, dextrin and fructose were the most suitable and lactose, mannose and sorbitol were the unsuitable for the fungus. Compact mycelial density was obtained from most of the carbon sources. Among used nitrogen sources, calcium nitrate, potassium nitrate and alanine were the most appropriate and the most incompatible were ammonium phosphate, histidine, urea and arginine for mycelial growth of S. commune on the culture media. Calcium nitrate, histidine and potassium nitrate showed moderately thin or thin, and rest of nitrogen sources showed compact or moderately compact mycelial density.

• ETRI Journal
• /
• 제37권4호
• /
• pp.727-735
• /
• 2015

This paper deals with the problem of blind source separation (BSS), where observed signals are a mixture of delayed sources. In reference to a previous work, when the delay time is small such that the first-order Taylor approximation holds, delayed observations are transformed into an instantaneous mixture of original sources and their derivatives, for which an extended second-order blind identification (SOBI) approach is used to recover sources. Inspired by the results of this previous work, we propose to generalize its first-order Taylor approximation to suit higher-order approximations in the case of a large delay time based on a similar version of its extended SOBI. Compared to SOBI and its extended version for a first-order Taylor approximation, our method is more efficient in terms of separation quality when the delay time is large. Simulation results verify the performance of our approach under different time delays and signal-to-noise ratio conditions, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제13권2호
• /
• pp.256-262
• /
• 2003

To enhance the production of heavy chain immunoglobulin G (HC IgG) in the suspension cultures of transgenic tobacco cells (Nicotiana tabacum), the effects of adding various cytokinins (i.e., growth regulators) and organic nitrogen sources to culture media were investigated. Four different cytokinins including kinetin, isopentenyladenine (IPA), 6-benzylaminepurine (BA), and zeatin were tested with or without dichlorophenoxyacetic acid (2,4-D), which is a typical growth regulator supplemented in the standard Murashige and Skoog (MS) medium. The productivity of intracellular HC IgG was increased by 36 and $42\%$, compared to the control, especially when IPA (2 mg/l) or BA (0.2 mg/l) was added to the media in the presence of 2,4-D, respectively. In the study of organic nitrogen sources, addition of each casein hydrolysate and tryptone to the culture media at a final concentration of 0.01 and 1 g/l, respectively. increased the productivity or he IgG as much as 68 and $67\%$, respectively, in comparison with the control, which was is MS medium without supplementation of any organic nitrogen sources. This study shows that the optimization of media composition could offer significant improvements in the production of foreign proteins in the suspension cultures of transgenic plants.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.435-435
• /
• 2010

A inclined slot-excited plasma source is newly designed and constructed for higher flux HNB(Hyperthermal Neutral Beam) generation. The present source is different from the vertical SLAN(SLot ANtenna) sources [1] in two aspects. One is that the slots are inclined, and the other is that the magnetic field is configured to a cusp type. These modifications are intended to make the source plasma operated in sub-milli-torr pressure regime and as thin as possible, both of which is to get higher HNB flux by decreasing the re-ionization rate of the reflected atoms from the neutralizer [2]. The plasma is generated in a quartz tube of internal diameter 170 mm enclosed in a aluminum application chamber of larger diameter 250 mm. The microwave power is fed to the plasma chamber by 8 inclined slots cut into the application chamber wall. The slots are coupled the chamber to a WR280 waveguide wound around it to form a ring resonator. In order to make two slots $\lambda_g/2$ apart in phase, the adjacent slots are rotated in opposite directions. The rotation angle of the slots are set to $60^{\circ}$ from the chamber axis. Between the quartz chamber and the aluminum cylindrical chamber 8 NdFeB magnets are equally spaced and fixed to form the cusp magnetic field confinement and ECR (Electron Cyclotron Resonance) field. In this presentation, the magnetic and electromagnetic simulations, and the measured plasma parameters are given for both the inclined and the vertical slot-excited plasma sources. We also discuss how the sources can be tailored to suit better-performing HNB sources.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.78-85
• /
• 2019

The effect of various lithium sources such as LiCl, LiOH, and Li-metal on the microstructure and electrochemical properties of granulated $SiO_x$ powders were investigated. Various lithium sources were metallurgically added for a passive pre-lithiation of $SiO_x$ to improve its low initial coulombic efficiency. In spite of using the same amount of Li in various sources, as well as the same process conditions, different lithium silicates were obtained. Moreover, irreversible phases were formed without reduction of $SiO_x$, which might be from additional oxygen incorporation during the process. Accordingly, there were no noticeable electrochemical enhancements. Nevertheless, the $Li_4SiO_4$ phase changes the initial electrochemical reaction, and consequently the relationship between the microstructure and electrochemical properties of metallurgically pre-lithiated $SiO_x$ could provide a guideline for the optimization of the performance of lithium ion batteries.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.75-84
• /
• 2002

In order to find out impact insulation properties, various types of current radiant floor heating systems and light-framed floors that are used in light-framed residential buildings were evaluated for two types of impact sources at the same time. Sound Pressure Level (SPL) was different from each impact sources for those spectrum patterns and peaks. In case of light-framed floor framework, the excitation position and the assumed effective vibrating area have effects on sound pressure level but it is not considerable, and Normalized SPL was reduced for each frequency by increasing the bending rigidity of joist. The mortar layer in the radiant heating system had relatively high density and high impedance, therefore, it distributed much of the impact power when it was excited, and reduced the Normalized SPL considerably. Nevertheless, Increasing a thickness of mortar layer had little influence on SPL. Ceiling components reduced the sound pressure level about 5~25 dB for each frequency. Namely, it had excellent sound insulation properties in a range from 200 to 4,000 Hz frequency for both heavy and lightweight impact sources. Also, there was a somewhat regular sound insulation pattern for each center frequency. The resilient channel reduced the SPL about 2~11 dB, irrelevant to impact source. Consequently, current radiant floor heating systems which were established in light-framed residential buildings have quite good impact sound insulation properties for both impact sources.

• Animal Bioscience
• /
• 제36권10호
• /
• pp.1568-1577
• /
• 2023

Objective: A study was conducted to determine the chemical composition of banana meal and rice bran from Australia or South-East Asia and test the hypothesis that there are no differences in rice bran produced in different countries, but there are differences between full-fat and defatted rice bran. Methods: Two sources of banana meal and 22 sources of rice bran (full-fat or defatted) from Australia or South-East Asia were used. All samples were analyzed for dry matter, gross energy, nitrogen, amino acids (AA), acid hydrolyzed ether extract (AEE), ash, minerals, total starch, insoluble dietary fiber, and soluble dietary fiber. Banana meal was also analyzed for sugars including glucose, fructose, maltose, sucrose, stachyose, and raffinose. Results: Chemical analysis demonstrated that banana meal from the Philippines is primarily composed of starch. Full-fat rice bran from Australia had greater (p<0.05) concentrations of AEE, lysine, and glycine than samples from the Philippines and Vietnam. Full-fat rice bran from Australia and Thailand had greater (p<0.05) concentrations of gross energy and most AA than rice bran from Vietnam. Full-fat rice bran from Australia had greater (p<0.05) concentrations of tryptophan and manganese than all other sources, but full-fat rice bran from the Philippines contained less (p<0.05) zinc than all other sources of rice bran. Gross energy, AEE, and copper were greater (p<0.05) in full-fat rice bran compared with defatted rice bran, but defatted rice bran contained more (p<0.05) crude protein, ash, insoluble dietary fiber, total dietary fiber, AA, and some minerals than full-fat rice bran. Conclusion: Banana meal is a high-energy source that can be used as an alternative ingredient in livestock diets. Full-fat rice bran from Australia and Thailand contained more concentrations of AEE and AA than samples from the Philippines or Vietnam. Full-fat rice bran had more gross energy and AEE than defatted rice bran, whereas defatted rice bran contained more crude protein, ash, and total dietary fiber.

• Journal of Nutrition and Health
• /
• 제26권2호
• /
• pp.119-130
• /
• 1993

본 시험은 Sprague-Dawley 계통 흰쥐 수컷에게 지방의 종류와 식이급여 횟수를 달리하면서 급여하였을 때 성장 및 지방대사에 미치는 영향을 알아보고자 4종류의 지방(팜유, 우지, 대두유 및 경화대두유) 및 2종류의 식이급여형태(ad-libitum, 4$\times$meal feeding)를 달리하여 4$\times$2 요인시험으로 실시하였다. 4주간 시험식이를 ad-libitum(AL)군은 식이를 제한없이 자유롭게 섭취하도록 하였으며, meal feeding(MF)군은 1일 1회 즉, 09:00~12:00까지만 식이를 제한없이 급여하였다. 사양시험 종료후 간조직에서의 콜레스테롤합성 능력을 알아보기 위해 흰쥐의 간조직을 채취하여 in vitro 배양 시험을 실시하였다. 또한 간과 지방조직에서의 지방합성 및 분해 능력을 알아보기 위해 사양시험이 끝난 흰쥐의 간과 지방조직을 채위하여 in vitro 세포배양에서의 지방합성 능력과 지방분해 능력을 측정하였다. 본 시험에서 얻어진 결과를 요약하면 다음과 같다. 1) 성장하는 흰쥐의 증체량, 식이섭취량 및 식이효율은 AS(ad-libitum+hydrogenated soybean oil)군이 다른군에 비해 유의하게(p<0.05) 증가하였다. 식이지방의 종류에 의한 영향은 받지 않고, 식이급여형태에 의한 차이를 보여 MF군이 AL군에 비해 식이섭취량이 감소하였고, 중체량도 60%정도로 유의성있게(p<0.05)감소했다. 2) 간조직의 콜레스테롤합성 능력은 식이급여형태에 의한 차이를 보여 MF군이 AL군에 비해 간조직의 콜레스테롤합성 능력이 증가되는 경향을 (p<0.001) 보였는데 특히 불포화도가 높은 대두유군에서 유의성있게(p<0.05) 증가되었다. 3) 간조직의 in vitro 지방합성 능력은 MP(meal feeding+palm oil)군이 AP(ad-libitum+palm oil)군보다, MHS(meal feeding+hydrogenated soybean oil)군이 AHS(ad-libitum+hydrogenated soybean oil)군보다 유의하게(p<0.05) 증가했고, AB(ad-libium+beef tallow)군과 MB(meal feeding+beef tallow)군에서 지방합성 능력이 현저하게 증가되는 경향을(p<0.05)보였다. 식이급여형태나 식이지방의 종류에 대한 차이는 보이지 않았다. 간조직에서의 in virto 지방분해 능력은 MF군이 AL군에 비해 유의하게(P<0.001) 증가했고, 식이지방의 종류에 의한 차이는 나타나지 않았다. 4) 지방조의 in vitro 시험에 의하면 MF식이가 AL식이에 비해 지방합성 능력이 유의성있게(p<0.05) 증가하였으나, 지방분해 능력은 저하되었다(p<0.001). 식이지방의 종류에 의한 영향을 받아 우지군이 다른 지방군에 비해 지방합성 능력이 유의성있게(p<0.001) 증가되는 경향을 보였으나, 지방분해 능력은 식이지방의 종류에 의한 영향을 받지 않았다.

• Clinical and Experimental Reproductive Medicine
• /
• 제19권2호
• /
• pp.125-131
• /
• 1992

The possible effect of human follicular fluid(hFF) on the growth and development of fertilized oocytes and embryos is important because the fallopian tubes are exposed to FF after follicular rupture and the processes of fertilization and embryo cleavage occur inside the fallopian tubes. Previously, it was suggested that human FF might adversely affect on the development of early mouse embryos. In order to investigate the effect of hFF on the development of embryos, early mouse embryos were cultured in media containing various protein sources as bovine serum albumin(BSA), fetal cord serum(FCS) and FF. And we evaluated the development of early mouse embryos in terms of the morphology, cleavage rate, and cell count of blastcysts. There were no significant differences in the morula and blstocyst formation rates of 2-cell mouse embryos cultured in the media containg three different protein sources and three different concentrations of FF. The blastocyst formation rate of 1-cell mouse embryo cultured in FF group was significantly higher than that cultured in BSA group(P<0.05). The morula and blastocyst formation rates of 2-cell mouse embryos of the group cultured in the media containing FF were comparable with those of other two groups, in addition, the cell count of blastocysts of FF group in the 2-cell embryo culture was higher than those of BSA group and HCS group(P<0.01), and this finding was also noted in 1-cell embryo culture. There was no difference in the morula and blastocyst formation rates of the 2-cell mouse embryos cultured in the media containing different concentrations of FF. These results suggest that mature human follicular fluid has no inhibitory activity on the development of early mouse embryos even in high concentration and may be a good protein source which is positively associated with the development of mouse embryos in vitro especially in 1 cell embryo culture.

• 센서학회지
• /
• 제27권5호
• /
• pp.335-339
• /
• 2018

The optical characteristics of a terahertz (THz) antenna-coupled bolometer (ACB) detector were evaluated using a pulsed quantum cascade laser (QCL) and radiation blackbody sources. We investigated a method for measuring the responsivity and noise-equivalent power (NEP) of the THz detector using two different types of light sources. When using a QCL source with a frequency of 3 THz, the average responsivity of 24 devices was $1.44{\times}10^3V/W$ and the average NEP of those devices was $3.33{\times}10^{-9}W/{\surd}Hz$. The average responsivity and NEP as measured by blackbody source were $1.79{\times}10^5V/W$ and $6.51{\times}10^{-11}W/{\surd}Hz$, respectively, with the measured values varying depending on the light source. This was because the output power of each light source was different, with the laser source being driven by a pulse type wave and the blackbody source being driven by a continuous wave. The power input to the THz sensor was also different. Futhermore, the responsivity and NEP values measured using band pass filter (BPF) were similar to those measured when using only THz windows. It was found that ACB sensor responds normally in the THz region to both the laser and the blackbody source, and the method was confirmed to effectively evaluate the characteristics of the THz sensor.