• Resources Recycling
• /
• v.10 no.1
• /
• pp.49-55
• /
• 2001

The strategy of recovering metals from scrap is in general much different from primary sources. One of the main differences between the treatment of scrap and that of primary sources lies with the fact that metals are frequently associated with other met-als to form alloys in scrap, while metals occur in primary sources as oxides or sulfides. In this paper, factors affecting the dis-solution behavior of metals from various alloy systems have been reviewed and discussed. Specific examples have been drawn from Au/Ag, Au/cu and Ag/cu systems. Results of the dissolution behavior of various metals from these alloys have been reviewed and compared to the dissolution behavior of single metal systems in various lixiviants such as acids, cyanide and ammonia. It has been observed that the presence of other metals in alloys would significantly affect the dissolution rate of the metal in question. The leaching behavior of metals from homogeneous alloys relies on the chemical interaction between atoms in the lattice of the alloys, while that from heterogeneous alloys is affected by galvanic interaction established in the solution The manner in which the dissolution of a certain metal is influenced by surrounding metals has been discussed in terms of pas-sive and noble nature of the metal in relation to the neighboring metals. The role of the standard electrochemical Potential of these metals on the selective dissolution for a given lixiviant has also been discussed.

• The Journal of the Korean Society for Microbiology
• /
• v.17 no.1
• /
• pp.57-66
• /
• 1982

The correlation between the serotypes and sensitivity distribution of Pseudomonas aeruginosa was studied with stock strains of department, strains isolated from various clinical sources and strains of haspital environment of the past two years. Two hundred and fifty seven strains were typable and 38 strains were untypable out of 295 clinical sorces. Serotype B was most provalent(27.6%) followed by serotype G(24.9%), serotype E(23.3%) and serotype A(7.8%) among 257 typable strains. However, no serotype J,L and M were observed. Serotype B,G,E and A were isolated from pus, sputum, wound, burn site and urine. Serotypes E were most frequently isolated from nasal discharge and serotypes K were isolated from pus. There were no apparent differences in sensitivity distribution of streptomycin, carbenicillin and ampicillin between the clinical and The environmental origin. However, the strains of environmental origin were found to be relatively more susceptable to tetracycline, gentamicin and fradiomycin than the strains of clinical sources in high concentration. The strains of clinical sources of serotype B,G,E and A showed different resistant patterns to all antimicrobial agents except for carbenicillin. Serotype E showed the highest percentage resistance followed by serotype G,B and A.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.47-61
• /
• 1996

An ATM switch must deal with various kinds of input sources having different traffic characteristics and it must guarantee very small value of cel loss probability, about 10$^{8}$ -10$^{12}$ , to deal with loss-sensitive traffics. In order to estimate such a rate event probability with simulation procedure, a variance reduction technique is essential for obtaining an appropriate level of precision with reduced cost. In this paper, we propose a hybrid simulation technique to achieve reduction of variance of cell loss probability estimator, where hybrid means the combination of analytical method and simulation procedure. A discrete time queueing model with multiple input sources and a finite shared buffer is considered, where the arrival process at an input source and a finite shared buffer is considered, where the arrival process at an input source is governed by an Interrupted Bernoulli Process and the service rate is constant. We deal with heterogeneous input sources as well as homogeneous case. The performance of the proposed hybrid simulation estimator is compared with those of the raw simulation estimator and the importance sampling estimator in terms of variance reduction ratios.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.2
• /
• pp.129-137
• /
• 2018

The present paper study investigates the relationship between social exclusion and donation intention among specific social groups in Korea. Social exclusion refers to non-participation in social experiences by the socially disadvantaged. Data were analyzed using two sources; first was the evidence of behaviors arising from social exclusion of the university students and then socially excluded reactions of the elderly responses from the survey were compared with the first research findings. The reason of using multi-sources of data is that the outcome from the experimental design of the university student is imperative to clarify what the conclusions will be the same result with the other demographic characteristic of the elderly. The research design was three excluded elderly individuals of a self-excluded group and two other excluded groups divided such as "ignored" and "rejected" individuals to compare the differences among three groups of different sources of exclusion. The conclusion of this study is that those with high social exclusion exhibited a more negative donation intention than those with lower social exclusion, but that those who perceived themselves as self-excluded were more likely to give donations than those excluded by others, regardless of the level of their social exclusion.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.745-750
• /
• 2003

Zoogloea ramigera produces an extracellular polysaccharide called zooglan, which adsorbs heavy metals. In the current study, Zoogloea ramigera was cultured in media containing various carbon sources. When different carbon sources were included in the cultivation medium, there was a change in the composition of zooglan that is mainly composed of glucose, galactose, and pyruvic acid. The various zooglan compositions were analyzed by HPLC, and changes in the heavy metal (lead (II) and cadmium) adsorption characteristics relative to a change in the composition were examined using an atomic absorption spectrophotometer. A high adsorption capacity was observed at a pH higher than 3.0. The adsorption of metal ions was the highest at $35^{\circ}C$, and a higher adsorption was obtained with a lower flow rate. Changes in the zooglan composition did result in changes in the heavy metal adsorption characteristics. Furthermore, it was also found that the pyruvic acid content was more important than the glucose or galactose content for heavy metal adsorption.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.2
• /
• pp.87-108
• /
• 2018

Schools are one of the critical social infrastructures in a society, the first place for social activity and the most important indoor environment for children besides the home. Poor IAQ in classrooms can increase the chance of long-term and short-term health problems for students and staffs; affects productivity of teachers; and degrade the student learning environment and comfort levels. The primary objective of this paper is to review and summarize available scientific evidence on indoor air quality of schools and related health effects in children. It was found that the indoor air pollutant levels in school buildings varied over a wide range in different parts of the world depending on site characteristics, climatic conditions, outdoor pollution levels, occupant activities, ventilation type and building practices. Among the indoor air pollutants, particulate matter concentrations were found to be very high in many schools. Outdoor pollutant sources also play a major role in affecting the IAQ of the school building. Hence, scientific knowledge on sources of indoor pollutants, quantification of emissions, temporal and spatial dispersion of pollutants, toxicological properties, chemical and morphological characteristics of the pollutants and associated health risk among children in the school buildings are essential to evaluate the adequacy and cost effectiveness of control strategies for mitigating the IAQ issues.

• Journal of Nutrition and Health
• /
• v.28 no.2
• /
• pp.107-114
• /
• 1995

These works were designed to examine the effects of dietary fiber sources and levels on lipid metabolism in rats fed high lard diet. Rats were divided into three($\alpha$-cellulose, polydextrose, carrageenan) groups and were fed with containing 6% fiber diet. Serum, liver and fecal lipid contents were examined after four weeks of dieting. Also, in order to investigate whether hypocholesterolemic effect of dietary fiber at 4 weeks is continued at 8 weeks, rats were fed with diets containing same sources with different levels of each dietary fiber and were sacrificed after eight weeks of dieting. Serum cholesterol in rats fed carrageenan diet and polydextrose diet were reduced compared with $\alpha$-cellulose-fed group at both four and eight weeks dieting. Liver cholesterol in both polydextrose-fed and carrageenan-fed group were lower than $\alpha$-cellulose-fed group. Fecal total group were increased compared with $\alpha$-cellulose-fed group. On the other hand, there was no significant difference between polydextrose-fed and carrageenan-fed group. On the basis of the results, it was suggested that the hypocholesterolemic effect of soluble fiber used in this study (polydextrose, carageenan) on rats was due to the inhibition of cholesterol absorption on the intestinal lumen and acceleration of cholesterol catabolism in the liver and enhancement of bile acids excretion. On the other hand, insoluble fiber($\alpha$-cellulose) showed no hypo-cholesterolemic effect.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.23-28
• /
• 2012

In this paper, noise of Korean high-speed trains (KTX) running at different speed from 150 to 300km/h was measured by a microphone array system. From the measurement, relation between maximum sound pressure levels and train moving speeds of KTX was drawn and a regression coefficient from the relation was also derived. Moreover, increases of SPL with speeds of KTX were analyzed in the frequency domain. From the analysis, sound characteristics of passing-by noise of KTX were provided. Then, dominant noise source areas were obtained from the measurements and propagation patterns of KTX in vertical direction were also investigated. Finally, noise sources of KTX were identified from inspection of noise maps.

• Mycobiology
• /
• v.43 no.1
• /
• pp.14-23
• /
• 2015

The influences of temperature and nutritional conditions on the mycelium growth of oyster mushroom Pleurotus ostreatus (PO) and Pleurotus cystidiosus (PC) were investigated in laboratory experiment during the summer season of 2014. The results of the experiment indicated that potato dextrose agar (PDA) and yam dextrose agar (YDA) were the most suitable media for the mycelium growth of oyster mushroom PO while four media (PDA, YDA, sweet potato dextrose agar, and malt extract agar medium) were not significantly different in supporting mycelium growth of oyster mushroom PC. The optimal temperature for mycelium growth of both oyster mushroom species was obtained at $28^{\circ}C$. Mycelium growth of oyster mushroom PO was improved by carbon sources such as glucose, molasses, and at 1~5% sucrose concentration, mycelium colony diameter of mushroom PO was achieved the highest value. Whereas glucose, dextrose, and sucrose as carbon sources gave the good mycelium growth of oyster mushroom PC, and at 1~3% sucrose concentration, mycelium colony diameter of PC was achieved the maximum value. Ammonium chloride concentrations at 0.03~0.09% and 0.03~0.05% also gave the greatest values in mycelium colony diameter of mushroom PO and PC. Brown rice was found to be the most favourable for mycelium growth of two oyster mushroom species. In addition, sugarcane residue, acasia sawdust and corn cob were selected as favourable lignocellulosic substrate sources for mycelium growth of both oyster mushrooms.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1271-1276
• /
• 2020

The geometrical efficiency of a source-to-detector configuration is considered to be necessary in the calculation of the full energy peak efficiency, especially for NaI(Tl) and HPGe gamma-ray spectroscopy detectors. The geometrical efficiency depends on the solid angle subtended by the radioactive sources and the detector surfaces. The present work is basically concerned to establish a new mathematical approach for calculating the solid angle and geometrical efficiency, based on conversion of the geometrical solid angle of a non-axial radioactive point source with respect to a circular surface of the detector to a new equivalent geometry. The equivalent geometry consists of an axial radioactive point source with respect to an arbitrary elliptical surface that lies between the radioactive point source and the circular surface of the detector. This expression was extended to include coaxial radioactive circular disk source. The results were compared with a number of published data to explain how significant this work is in the efficiency calibration procedure for the γ-ray detection systems, especially in case of using isotropic radiating γ-ray sources in the form of point and disk shapes.