• Korean Journal of Environmental Agriculture
• /
• v.37 no.4
• /
• pp.283-290
• /
• 2018

BACKGROUND: Pesticide residue analysis is an essential activity in order to establish the food safety of agricultural products. Analytical approaches to the food safety are required to meet internationally the guideline of Codex (Codex Alimentarius Commission, CAC/GL 40). In this study, we developed a liquid chromatograph-tandem mass spectrometer (LC-MS/MS) method to determine the herbicide clopyralid in food matrixes. METHODS AND RESULTS: Clopyralid was extracted with aqueous acetonitrile containing formic acid and the extracts were mixed in a citrate buffer consisted of magnesium sulfate anhydrous, NaCl, sodium citrate dihydrate and disodium hydrogencitrate sesquihydrate followed by centrifugation. The supernatants were filtered through a nylon membrane filter and used for the analysis of clopyralid. The method was validated by accuracy and precision experiments on the samples fortified at 3 different levels of clopyralid. LC-MS/MS in positive mode was employed to quantitatively determine clopyralid in the food samples. Matrix-matched calibration curves were inearranged from 0.001 to 0.25 mg/kg with r2 > 0.994. The limits of detection and quantification were determined to be 0.001 and 0.01 mg/kg, respectively. There covery values of clopyralid for tified at 0.01 mg/kg in the control samples ranged from approximately 82 to 106% with relative standard deviations below 2 0%. CONCLUSION: The method developed in this study meets successfully the Codex guideline for pesticide residue analysis in food samples. This, the method could be applicable to determine pesticides in foods produced domestically and internationally.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.97-106
• /
• 2018

This study aimed at examining the suitability of $Tenax^{(R)}$ for the migration testing of food packaging materials, which is currently approved in the EU as a dry food simulant. The results are used as a basis to examine the feasibility of introducing $Tenax^{(R)}$ to Korean regulation. The OMVs of test specimen into various solvents (diethyl ether, ethanol, pentane, and acetone) after exposure to $100^{\circ}C$ for 1 hr were compared. Diethyl ether showed the highest OMV ($1.33mg/dm^2$) among the solvents tested. When the tests were conducted with different amounts of $Tenax^{(R)}$ of 2, 4, or 8 g per specimen, the OMVs were 0.75, 1.33 and $1.40mg/dm^2$, respectively. The OMV obtained with a closed system after wrapping with aluminum foil showed a significantly higher OMV ($1.61mg/dm^2$) than that without aluminum wrapping ($1.318mg/dm^2w$) and an open system without lid ($1.06mg/dm^2$). The specific migration rates of surrogates spiked in the polyethylene test film and paper samples into $Tenax^{(R)}$ were compared with those into liquid food simulants including 95% ethanol and n-heptane, and actual foods such as starch, skim milk, and sugar. In general, the specific migration levels of surrogates into $Tenax^{(R)}$ were similar compared with n-heptane, however those were significantly higher than into actual foods. These results suggest that $Tenax^{(R)}$ may be used as a food simulant for the long-term preservation of dried foods and paper products. However, more studies need to be conducted to investigate the factors influencing the migration into $Tenax^{(R)}$, such as the types of foods and packaging materials tested, migration conditions, and surrogates properties etc.

• (The) Korean Journal of Advertising
• /
• v.27 no.3
• /
• pp.7-25
• /
• 2016

According to recent studies, the location of visual information has a significant impact on consumers' interpretation and judgment in various contexts. In particular, vertical positioning is relevant to the perception of weight: consumers tend to interpret that products are heavier when information is placed at the bottom of a page or section rather than the top. This is due to the common perception that heavy things would sink to the bottom and light things would float up. Consistent with this research stream, the current study investigates how the vertical location of freebie information influences promotion evaluation. We hypothesize that consumers assume that the complimentary product is heavier when the information about it is displayed at the bottom compared to when the information is displayed at the top. Two experiments were conducted. In experiment 1, we show how the location of "get one free" information impacts the evaluation of the sales promotion in a "Buy two and get one free" context. When the complimentary information was displayed below rather than above the main product information, consumers evaluated the sales promotion more favorably. Experiment 2 tests the generalizability of the vertical location effect by using a different type of information and product: a visual picture of vitamin tablets rather than the numeric information as in Experiment 1. The dependent variable was also extended to the perceived amount of the promoted product. We suggest the boundary condition that the proposed effect is moderated by the presence or absence of an explicit message about the amount. Without an explicit message about the amount of the product, the results were similar to those of experiment 1 in that consumers perceived that the product offered a greater amount when the complimentary information was displayed at the bottom rather than at the top. However, the location effect disappeared with an explicit message about the amount. This confirms the moderating effect that presenting an explicit message about the amount is a crucial boundary condition for location effect in a value added promotion. Marketers can use this knowledge to formulate strategies in a variety of sales promotion conditions.

• Journal of Intelligence and Information Systems
• /
• v.24 no.4
• /
• pp.51-66
• /
• 2018

As AI (Artificial Intelligence) technologies have been swiftly evolved, a lot of products and services are under development in various fields for better users' experience. On this technology advance, negative effects of AI technologies also have been discussed actively while there exists positive expectation on them at the same time. For instance, many social issues such as trolley dilemma and system security issues are being debated, whereas autonomous vehicles based on artificial intelligence have had attention in terms of stability increase. Therefore, it needs to check and analyse major social issues on artificial intelligence for their development and societal acceptance. In this paper, multi-categorical sentiment analysis is conducted over online public opinion on artificial intelligence after identifying the trending topics related to artificial intelligence for two years from January 2016 to December 2017, which include the event, match between Lee Sedol and AlphaGo. Using the largest web portal in South Korea, online news, news headlines and news comments were crawled. Considering the importance of trending topics, online public opinion was analysed into seven multiple sentimental categories comprised of anger, dislike, fear, happiness, neutrality, sadness, and surprise by topics, not only two simple positive or negative sentiment. As a result, it was found that the top sentiment is "happiness" in most events and yet sentiments on each keyword are different. In addition, when the research period was divided into four periods, the first half of 2016, the second half of the year, the first half of 2017, and the second half of the year, it is confirmed that the sentiment of 'anger' decreases as goes by time. Based on the results of this analysis, it is possible to grasp various topics and trends currently discussed on artificial intelligence, and it can be used to prepare countermeasures. We hope that we can improve to measure public opinion more precisely in the future by integrating empathy level of news comments.

• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.354-360
• /
• 2019

In order to extend the shelf life of Wasabi paste, the effects of citric acid were confirmed at $35^{\circ}C$ for 28 days. Citric acid-treated groups contained citric acid in amounts of 0.05, 0.10, 0.17, 0.30, and 0.40%, respectively. Quality characteristics of Wasabi pastes were determined in pH, titratable acidity, soluble solid content, color values, microbial analysis (aerobic bacteria, yeast), gas production, and content of allyl isothiocyanate. The pH and titratable acidities of Wasabi pastes added with citric acid were indicated as 4.03-5.19 and 4.23-4.82%, respectively. Soluble solid content was significantly different according to concentrations of citric acid. L values showed the highest at $50.05{\pm}0.46$. a and b values were increased during the storage period. Total aerobic bacteria and yeast counts of Wasabi pastes were decreased in a dose-dependent manner. Gas production from Wasabi pastes showed at 19.55-19.80 mL/tube after 28 days of storage. The addition of citric acid (0.3% or more) to the Wasabi paste resulted in increased storage stability.

• Korean Journal of Ecology and Environment
• /
• v.52 no.3
• /
• pp.179-191
• /
• 2019

Heavy metals in stream water and sediments around industrial complex were studied in order to assess the contamination and to identify the potential source of metals. High variability has been observed for both dissolved and particulate phases in stream water with coefficient of variation (CV) ranging from 1.3 to 2.8. The highest metal concentrations in both phases were observed in Gunja for Ni and Cu, in Jungwang for Zn and Pb and in Shiheung for Cd, respectively. These results indicate that the different metal sources could be existing. The concentrations of the heavy metals in sediments decreased in the order of Cu>Zn>Pb>Cr>Ni>As>Cd>Hg, with mean of 2,549, 1,742, 808, 539, 163, 17.1, 5.8, $0.07mg\;kg^{-1}$, respectively. Mean of metal concentrations(except for As) in sediments showed the highest values at Shiheung stream comparing with other streams. In sediments, the percent exceedance of class II grade that metal may potentially harmful impact on benthic organism for Cr, Ni, Cu, Zn, Cd, Pb was about 57%, 62%, 84%, 60%, 68%, 81% for all stream sediments, respectively. Sediments were classified as heavily to extremely polluted for Cu and Cd, heavily polluted for Zn and Pb, based on the calculation of Igeo value. About 59% and 35% of sediments were in the categories of "poor" and "very poor" pollution status for heavy metals. Given the high metal concentrations, industrial wastes and effluents, having high concentrations of most metals originated from the manufacture and use of metal products in this region, might be discharged into the stream through sewer outlet. The streams receive significant amounts of industrial waste from the industrial facilities which is characterized by light industrial complexes of approximately 17,000 facilities. Thus, the transport of metal loads through streams is an important pathway for metal pollution in Shihwa Lake.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.242-250
• /
• 2019

An analytical method was developed for the determination of fenquinotrione, a triketone herbicide, in agricultural products. Fenquinotrione was metabolized to KIH-3653-M-2 in plants. Analyte extraction was conducted using 2% formic acid in acetonitrile and cleaned up using a hydrophillic-lipophillic balance (HLB) cartridge. The limits of detection (LOD) and quantification (LOQ) were 0.004 and 0.01 mg/kg, respectively. Matrix-matched calibration curves were linear over the calibration ranges ($0.001{\sim}0.1{\mu}g/mL$) into a blank extract with $r^2>0.99$. The recovery results for fenquinotrione and KIH-3653-M-2 ranged between 81.1 to 116.2% and 78.0 to 110.0% at different concentration levels (LOQ, $10{\times}LOQ$, $50{\times}LOQ$) with relative standard deviation (RSD) less than 4.6%. All values were corresponded with the criteria ranges requested in both the Codex (CAC/GL 40-1993, 2003) and MFDS guidelines (2016). Therefore, the proposed method can be used as an official analytical method for determination of fenquinotrione in the Republic of Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.75-84
• /
• 2018

The inclusive playground is a playground where disabled children and non-disabled children can play together, not a playground for the disabled. It started with the change of social awareness of the citizenship rights of disabled people in the 1960s and the resulting playgrounds. Since then, inclusive playgrounds have been developed in many countries, and these are organized in the form by guidelines. In Korea, social interest in inclusive playgrounds is increasing, but there are no systematic guidelines in Korea, and the application of overseas cases or guidelines is limited. The purpose of this study is to classify the concept of inclusive playgrounds and design guidelines, that were previously presented in inclusive playground design guideline of various countries and analyze the characteristics of, design scope, and design principles, and provide a basic framework for creating guidelines. The purpose of the design guideline was to present specific numerical values to the inclusive playground design guidelines, to link with academic research and industrial products, to present pursuit values, and to expand the value of pursuing design methods. The contents were covered by scope, conceptualization, principles of design and design process, design guidelines, and checklists. Most of the guideline covers specific autonomous governments or countries that can apply the related systems or laws, but the composition of the detailed contents is different. The guiding value of inclusive playgrounds presented in each guideline is not a playground for the disabled but a playground for all, and some guidelines refer to the difficulty in playgrounds considering non-disabled children. Based on these concepts, design guidelines are presented in each guideline. Improving the accessibility in design principles is a common theme and adds to the principles of safety, independence, convenience, and playability. None of the guidelines do not provide design guidelines. Although there is a difference in the degree and method of specificity provided by each of the guidelines, the design guidelines can be generally summarized as space, copper line, and unit facilities. As mentioned in many guidelines, an inclusive playground is not only a playground for children with disabilities. Therefore, in the design guidelines, it is also important to the support play of children with disabilities and to induce inclusive play. The design guidelines presented in the guideline can be rearranged into three stages of 'supporting the play of children with disabilities', 'securing the dimensions and materials of spaces and facilities', 'adding auxiliary devices' and 'designing new facilities'. There are three design guidelines for inducing inclusive play. First, by creating various difficulty levels and intersecting spaces, children with various abilities can play with each other, and at the same time, they can interact witheach other. Second, all children can cooperate and play without distinction between children with disabilities and non-disabled children. Finally, the guardian provides the conditions for efficient support so that the disabled child can fully enjoy the inclusive playground.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.47-59
• /
• 2019

Various studies have been carried out on the subject of entrepreneurship, which is required to create new businesses and organizations during the early process of startups based on innovative technologies and ideas. At the same time, the concept of organizational entrepreneurial orientation, which explains how to manage enterprises in the process of pioneering new products and markets, is drawing more and more attention for the purpose of continuously creating and maintaining a competitive edge of startups. This study focused on the relationship between entrepreneurial orientation and startup performance and the role of technological orientation and social capital. An empirical research was conducted on 144 different startup companies residing in startup supporting institutions. To evaluate the suitability of the research model, a PLS-based structural equation model was used. The research results are as follows: First, the entrepreneurial orientation of startups was found to have a positive effect on startup performance. Second, it was shown that entrepreneurial orientation had a positive effect on all three dimensions of social capital and technological orientation. Third, it has been shown that technological orientation and the cognitive dimension of social capital mediates the relationship between entrepreneurial orientation and startup performance. Through this, it was confirmed that entrepreneurial orientation directly affects startup performance, and it even influences the growth of startups by increasing technological superiority and social capital which is inherent in the network. Also, the research identified the need for additional research on the relationship between the strengthening of technological orientation and strategical orientation in startups. This study is expected to expand the discussion about social capital in the field of startup related research by affirming the role and importance of the cognitive system embedded in the network as well as the connectivity of networks, which has been already emphasized in previous startup related studies. Finally, the results of this study were reflected to present new practical implications.

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.225-232
• /
• 2017

Most of the red ginseng (RG) products contain active substances derived from hot water or alcohol extraction. Since active substances of RG are divided into two types - water-soluble and liposoluble - water or alcohol is needed as an extraction solvent and this leads the different extraction yields and components of the active substances. To overcome the limit, whole red ginseng powder can be used and consumed by consumers. In this study, the physicochemical properties and extractable active substance contents of variable-sized RG powder ($158.00{\mu}m$, $8.45{\mu}m$, and $6.33{\mu}m$) were analyzed, and dispersion stability was measured to investigate the suitable size of RG powder for industrial processing. In the results, no significant difference was found from the changes in color intensity and thiobarbutric acid tests at $4^{\circ}C$, $25^{\circ}C$, and $40^{\circ}C$ for 4 weeks. There was no significant difference on the production of antioxidants and ginsenoside among the samples (p>0.05). In dispersion stability, $RG-158.00{\mu}m$ was precipitated immediately, and the dispersion stabilities between $RG-8.45{\mu}m$ and $RG-6.33{\mu}m$ showed no significant difference. It implies that fine RG is suitable for the production process. With further study, it seemed that the physicochemical effects of RG particle sizes can be clearly revealed.