• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.50-58
• /
• 2014

Due to the cost burden of new construction, the necessity of repair and retrofitting of aged structures is sharply increasing as the domain of repair and retrofitting construction is expanding. Because of the necessity, new technologies for repair and retrofitting are continuously studied in Korea and foreign countries. Steel adhesive method, fiber reinforced plastic (FRP) surface adhesive method, and external prestressing method are used to perform the repair and retrofitting works in Korea. In order to consider a repair method using steel mesh reinforced cement mortar (SMCM), 3-point flexural member test was conducted considering repair area and layer number of SMCM. Five types of specimens including ordinary reinforced concrete (RC) specimen with dimensions of $1400{\times}500{\times}200$ (mm) were cast for testing the deflection measurement, a LVDT was installed at the top center of the specimens. Also, a steel strain gauge and a concrete strain gauge were placed at the center of the specimens. A steel strain gauge was also installed on the shear reinforcement. The 3 point flexural member test results showed that the maximum load of SMCM reinforced specimen was higher than that of basic RC specimen in all of the load-displacement curves. Also, the results showed that, when the whole lower part of the basic RC specimen was reinforced, the maximum load and strain were 1.18 and 1.37 times higher than that of the basic RC specimen, respectively. Each specimen showed a slightly different failure behavior where the difference of the results was caused by the difference in the adhesive level between SMCM and RC. Particularly, in SM-B1 specimen, SMCM spalled off during the experiment. This failure behavior showed that the adhesive performance for RC must be improved in order to utilize SMCM as repair and retrofitting material.

• Journal of Gifted/Talented Education
• /
• v.22 no.3
• /
• pp.619-637
• /
• 2012

The purpose of this study is to develop a new program for elementary math-gifted students by using 'Girih Tililng' and apply it to the elementary students to improve their math-ability. Girih Tililng is well known for 'the secrets of mathematics hidden in Mosque decoration' with lots of recent attention from the world. The process of this study is as follows; (1) Reference research has been done for various tiling theories and the theories have been utilized for making this study applicable. (2) The characteristic features of Mosque tiles and their basic structures have been analyzed. After logical examination of the patterns, their mathematic attributes have been found out. (3) After development of Girih tiling program, the program has been applied to math-gifted students and the program has been modified and complemented. This program which has been developed for math-gifted students is called 'Exploring the Secrets of Girih Hidden in Mosque Patterns'. The program was based on the Renzulli's three-part in-depth learning. The first part of the in-depth learning activity, as a research stage, is designed to examine Islamic patterns in various ways and get the gifted students to understand and have them motivated to learn the concept of the tiling, understanding the characteristics of Islamic patterns, investigating Islamic design, and experiencing the Girih tiles. The second part of the in-depth learning activity, as a discovery stage, is focused on investigating the mathematical features of the Girih tile, comparing Girih tiled patterns with non-Girih tiled ones, investigating the mathematical characteristics of the five Girih tiles, and filling out the blank of Islamic patterns. The third part of the in-depth learning activity, as an inquiry or a creative stage, is planned to show the students' mathematical creativity by thinking over different types of Girih tiling, making the students' own tile patterns, presenting artifacts and reflecting over production process. This program was applied to 6 students who were enrolled in an unified(math and science) gifted class of D elementary school in Daejeon. After analyzing the results produced by its application, the program was modified and complemented repeatedly. It is expected that this program and its materials used in this study will guide a direction of how to develop methodical materials for math-gifted education in elementary schools. This program is originally developed for gifted education in elementary schools, but for further study, it is hoped that this study and the program will be also utilized in the field of math-gifted or unified gifted education in secondary schools in connection with 'Penrose Tiling' or material of 'quasi-crystal'.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.989-998
• /
• 2014

We investigated the characteristics and biological activities of vinegars added with different levels (0%, 0.5%, 1%, 2%, and 3%) of young leaves of Akebia quinata. During alcohol fermentation, alcohol and total acidity contents of vinegars increased. During acid fermentation, total acidity and amino acid contents increased. Vinegar added with 3% A. quinata leaf showed the highest total sensory score. The contents of total polyphenols, flavonoids, and tannin significantly increased during fermentation according to the amount of A. quinata leaf. After 22 days of fermentation, total polyphenol, total flavonoid, and tannin contents of vinegar added with 3% A. quinata were 4,079.08 mg GAE/100 g, 2,927.08 mg CE/100 g, and 3,618.00 mg TAE/100 g, respectively. ABTS radical scavenging activity of vinegar added with 3% A. quinata was 79.63%. Anti-cancer activities of vinegar added with 3% A. quinata were 48.65% and 52.90% against MCF-7 and HepG2 cells, respectively. Vinegar added with 3% A. quinata showed anti-bacterial activities against Bacillus cereus, Shigella flexneri, Salmonella enterica, Bacillus subtilis, and Klebsiella pneumoniae. Our results demonstrate that the biological activities of vinegar added with 3% A. quinata leaf (22 days of fermentation) were excellent, and their enhanced total polyphenol, flavonoid, and tannin contents were associated with antioxidant, anti-cancer and anti-microbial activities. Thus, A. quinata can be used as a functional material in vinegar and other foods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.257-265
• /
• 2009

Statement of problem & Purpose: To study the effect of different fluoridation methods after in-office bleaching on the color of teeth during severe staining with coffee. Material and methods: 44 specimens were randomly divided into four groups. Group 1 (no bleaching, no fluoride, coffee) was served as control for the influence of coffee on the color of untreated teeth. Group 2, 3 and 4 were undergone bleaching with 35% $H_2O_2$ for 30 minutes a day on 3 consecutive days. Group 2 was remained without fluoridation. Group 3 and 4 were fluoridated for 1 hour with either Cavity shield$^{(R)}$ or pH 7 Gel$^{(R)}$. All of groups were immersed in coffee solution for 7 days. Color determination was accomplished using the spectrophotometer (VITA Easyshade$^{(R)}$). Results: ${\Delta}L$ and ${\Delta}h$ increased, whereas ${\Delta}C$ decreased in the bleached groups. Pairwise comparisons with Tukey's HSD showed that there were statistically significant differences for ${\Delta}L$ and ${\Delta}h$ between the bleached groups and the non-bleached group (P < .05). ${\Delta}L$ and ${\Delta}h$ decreased continuously, while ${\Delta}C$ showed an increase after a decrease in all of groups during immersion in coffee solution. After immersion in coffee solution for 7 days there were no statistically significant differences for ${\Delta}L$, ${\Delta}C$ and ${\Delta}h$ between the groups (P > .05). Also there were no statistically significant differences for ${\Delta}L$, ${\Delta}C$ and ${\Delta}h$ between the group 3 treated with Cavity shield. and the group 4 treated with pH 7 Gel. (P > .05). Conclusion: It was concluded that fluoridation was not beneficial to the prevention of extrinsic stains after bleaching.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.328-334
• /
• 2009

Statement of problem: Pier abutments act as a Class I fulcrum lever system when the teeth are incorporated in a fixed partial denture with rigid connectors. Therefore non-rigid connector incorporated into the fixed partial denture might reduce the stresses created by the leverage. Purpose: The purpose of this study was to evaluate, by means of finite element method, the effects of non-rigid connectors and supporting alveolar bone level on stress distribution for fixed partial dentures with pier abutments. Material and methods: A 2-dimensional finite element model simulating a 5-unit metal ceramic fixed partial denture with a pier abutment with rigid or non-rigid designs, the connector was located at the distal region of the second premolar, was developed. In the model, the lower canine, second premolar, and second molar served as abutments. Four types of alveolar bone condition were employed. One was normal bone condition and others were supporting bone reduced 20% height at one abutment. Two different loading conditions, each 150 N on 1st premolar and 1st molar and 300N on 1st molar, were used. Results: Two types of FPD were displaced apically. The amount of displacement decreased in an almost linear slope away from the loaded point. Non-rigid design tended to cause the higher stresses in supporting bone of premolar and molar abutments and the lower stresses in that of canine than rigid design. Alveolar bone loss increased the stresses in supporting bone of corresponding abutment. Conclusion: Careful evaluation of the retentive capacity of retainers and the periodontal condition of abutments may be required for the prosthetic design of fixed partial denture with a pier abutment.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.235-242
• /
• 2006

The precise estimation of total and organic carbon contents in sediments is fundamental to understand the benthic environment. To test the precision and accuracy of CHN analyzer and the procedure to quantify total and organic carbon contents(using in-situ acidification with sulfurous acid($H_2SO_3$)) in the sediment, the reference material s such as Acetanilide($C_8H_9NO$), Sulfanilammide($C_6H_8N_2O_2S$), and BCSS-1(standard estuary sediment) were used. The results indicate that CHN analyzer to quantify carbon and nitrogen content has high precision(percent error=3.29%) and accuracy(relative standard deviation=1.26%). Additionally, we conducted the instrumental comparison of carbon values analyzed using CHN analyzer and Coulometeric Carbon Analyzer. Total carbon contents measured from two different instruments were highly correlated($R^2=0.9993$, n=84, p<0.0001) with a linear relationship and show no significant differences(paired t-test, p=0.0003). The organic carbon contents from two instruments also showed the similar results with a significant linear relationship($R^2=0.8867$, n=84, p<0.0001) and no significant differences(paired t-test, p<0.0001). Although it is possible to overestimate organic carbon contents for some sediment types having high inorganic carbon contents(such as calcareous ooze) due to procedural and analytical errors, analysis of organic carbon contents in sediments using CHN Analyzer and current procedures seems to provide the best estimates. Therefore, we recommend that this method can be applied to measure the carbon content in normal any sediment samples and are considered to be one of the best procedure far routine analysis of total and organic carbon.

• Journal of Chest Surgery
• /
• v.32 no.1
• /
• pp.1-4
• /
• 1999

Background: The transplantation of organs between phylogenetically disparate or harmonious species has invariably failed due to the occurrence of hyperacute rejection or accerelated acute rejection. But, concordant cardiac xenograft offer us an opportunity to study xenotransplantation in the absence of hyperacute rejection. Current therapeutics for the prolongation of survival of rodent concordant xenotransplantation are not ideal with many regimens having a high mortality rate. Cyclosporine A & Mycophenolate Mofetil are new immunosuppresive agent which has been shown to be effective at prolonging survival of allograft, as purine synthesis inhibitor. Material and Method: We used white mongrel rats as recipient and mice as donor, divided 4 groups(n=6), control group(Group 1) has no medication or pretreatment, Group 2 has splenectomy as pretreatment 7∼10 days before transplantation, Group 3 has Cyclosporine A treatment group, Group 4 has combined treatment of Cyclosporine A & Mycophenolate Mofetil(RS 61443). We compared survival time. Reuslt: We can't find significant difference of survival time between each groups. Conclusion: We concluded that rejection of cardiac xenograft was different from rejection of allograft, and new immunossuppresive Agent(Mycophenolate Mofetil, Cyclosporine A) was not effective for prolongation of survival time after cardiac xenograft.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.49-56
• /
• 2016

This study analyzed the physicochemical characteristics of Astragalus membranaceus (AM) fermented with seven different mushroom mycelia. Physicochemical characteristics, such as contents of moisture, pH, total reducing sugars, free sugar, and isoflavonoid, were investigated. The moisture content was increased in most of the samples. The pH values of AM fermented with Phellinus linteus and Flammulina velutipes were increased, while the pH of other samples were similar to that of non-fermented AM. The reducing sugar content was in the range of 211.69~391.74 mg/100 g. The extraction yield using water was higher than that when extracted with 80% ethanol. The free sugar content was increased through fermentation with mushroom mycelia. However, the glucose contents of the 80% ethanol and water extracts were decreased. Finally, the calycosin and formononetin contents in 80% ethanol and water extracts of AM fermented with Phellinus linteus were 2,549.24 mg/g, and 827.66 mg/g for calycosin, and 1,366.69 mg/g and 221.28 mg/g for formononetin, respectively. These results suggest that fermentation with mushroom mycelia could be used to increase the bioactivity of AM. The mycelium-fermented AM might be a valuable source of functional material and edible resource for industry.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.1063-1073
• /
• 2016

Male climacteric syndrome, andropause, or testosterone deficiency syndrome (TDS) is one of the new health issues in elderly men. It is a natural phenomenon that happens with age in men, which is clinically characterized by a decline in levels of serum testosterone resulting in a significantly decreasing of physical and mental activities. The aim of this study was to investigate the putative alleviative effects of dandelion extract on the symptoms of TDS by increasing serum testosterone levels and compare the efficacy between dandelion extract (DE) and fermented dandelion extract (FDE). After daily intake of DE and FDE for 4 weeks, serum testosterone levels, muscles of vastus lateralis, forced swimming time, total sperm counts, and motile sperm counts were significantly increased in older rats (22 weeks). Additionally, SHBG, epididymal fat pad, total serum cholesterol and triglyceride were significantly decreased in DE and FDE fed groups. However, PSA levels were not different among all groups. Furthermore, DE and FDE enhanced the expression of genes related to testosterone biosynthesis in TM3 Leydig cells. Overall, these positive effects on andropause were greater in FDE compared to DE. These results suggest the potential of FDE as a safe and efficacious natural material for recovering testosterone levels and reducing andropause symptoms.