• Journal of the Korea Furniture Society
• /
• v.11 no.2
• /
• pp.7-12
• /
• 2000

This paper describes the bending strength properties of laminated woods which had three kinds of specimens according to finger length-12, 4.5 mm and butt joint and the acoustic emissions (AEs) generated during the test. 3-ply laminated wood beams were tension side layers (lower layers) composed of one middle lamina and two side-jointed laminae, with one butt joint ($_1BJ$), one finger joint (12mm, $_1FJ_{12}$) or one finger joint (4.5mm, $_1FJ_{4.5}$) in the middle lamina of tension side layer. And 3-ply laminated wood beams were tension side layers (lower layers) also composed of one lamina, with one butt joint (BJ), one finger joint (12mm, $FJ_{12}$) or one finger joint (4.5mm, $FJ_{4.5}$/) in tension side layer. Cryptomelia pieces were cut for butt and two finger types and glued with resorcinol-phenol resin adhesive. The results were as follows It was not effective in the bending modulus of elasicity (MOE) with IFJL type and had no difference from finger length. The bending modulus of rupture (MOR) of laminated wood beams including finger joint was the same values as that including butt feint and had no difference from finger length. It was effective in MOE with FJL type and had no difference from finger length. The effect of finger joint on MOR was much higher than that of butt joint but had no difference from finger length. The AE generation time of IFJL type was earlier than that of the control wood and the number of AE count was much more than that of the control wood. However, the AE generation time of FJL type was earlier than that of the control wood and the number of U count was much fewer than that of the control wood.

• Journal of Practical Engineering Education
• /
• v.16 no.1_spc
• /
• pp.51-58
• /
• 2024

This paper examines the differences between the Korean and American stock markets using the Kospi and S&P 500 indices and discusses policy implications through them. To this end, in addition to the existing time series analysis method, a deep learning method was used to compare markets, and the comparison was made in terms of stock price forecasting ability and data generation ability. In monthly data, the difference between time series was not large, and in daily data, the difference in terms of stability was weak, and there was no significant difference in predictive power or simulation data generation. As shown in the results of this study, if there is not much difference in market price movement patterns between Korea and the United States, tax benefits for long-term stocks investment will be effective against the side effects of short selling.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.755-758
• /
• 2002

The physical phenomena of rectangular open cavity are numerically investigated in this paper Two-dimensional cavity problems with laminar boundary layers in upstream are simulated by using the compressible Wavier-Stokes equations. The high-order and high-resolution numerical schemes are used for the evaluation of spatial derivatives and the time integration. Cross-correlation is used to analyze the characteristics of wave propagation along time and spatial. Sudden phase shifting of 90 degrees is appeared near downstream edge, and this is coincident with the phase lag suggested in original Rossiter's equation. The results give a further understanding of the physical phenomenon of noise generation, and the resonance of flow and acoustic in cavity. Moreover, modified Rossiter's equation, which is more accurate and can be applied in various conditions, is suggested. The distance from the point of vortex generation to the point of vortex collapsing acts as effective distance of cavity resonance, and the phase difference between the point of vortex collapsing and the point of acoustic source acts as phase lag. The mechanism of acoustic generation is fully understood in this paper. The mechanism of acoustic generation is fully understood in this paper.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.2
• /
• pp.31-39
• /
• 2016

This study did quantitative comparative evaluation of changes in generation consequent on reflectivity of the protruding wall near the widow in case of application of PV window system to an apartment house. To be concrete, this study did comparative analysis of the generation of (B) through the process of composing Mock-up (A)comprising the protruding window near the window and Mock-up(B) free of nearby wall interference, and giving change to the reflectivity of the wall (Case_1~3). The analysis result showed that the difference in generation was slight in case solar radiation was less than 10,000Wh in all three conditions. On the contrary, in case solar radiation was more than 10,000 Wh, the generation as against Module(B), was analyzed to be 87~91% in Case_1(5% reflectivity), 18~60% in Case_2(85% reflectivity), and 16~71% in case_3(93% reflectivity), respectively.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.2
• /
• pp.1-8
• /
• 2021

The purpose of this study is to understand the impact of the nursing work environment, job embeddedness, and job esteem on the retention intention in the millennial generation nurses. The subjects of this study are nurses working in general hospitals with more than 300 beds. Among nurses born in the 1980s and early 2000s, 97 agreed to study. As a result of the study, there was a significant difference in academic background.(F=6.74, p=.002) In terms of final education, those with graduate or higher were higher than those with three-year graduation and four-year graduation Retention intention is the degree of job placement (r=.319, p=.001), job respect (r=.331, p=.001) had a positive relationship with the nursing working environment (r=-.252, p=.013) was negatively correlated. Factors affecting the retention intention is 12.9% explanatory skills as a result of the introduction of job embeddedness, nursing work environment, and job esteem. It is necessary to understand the characteristics of the generation in order to increase the retention intention as a millennial generation nurse.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.362-367
• /
• 2011

The aerodynamic performance of the pantograph of the next generation high sped train is analyzed. The calculation of the flow around pantograph is carried cut by FLUENT; by the steady state flow calculation with ${\kappa}-{\omega}$ SST turbulence model, the lift force of the pantograph is computed. For the verification of the numerical schemes am grid systems, flow calculations are performed with the pantograph shape which was used at the experiments performed at Railway Technical Research Institute (RTRI) in Japan. Then, the difference of lift force between numerical am experimental results is about 10%. Therefore, selected numerical schemes and the current grid system is adequate for the analysis am prediction of the aerodynamic performance of panthograph system. Based on these numerical schemes am grid system, the flow around pantograph of the next generation high sped train is calculated and the lift force of the pantograph is predicted; the lift force of the pantograph is about 146N.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.964-972
• /
• 2011

This work investigated the difference between $Fe^{2+}$ autoxidation-induced and Fenton-type cleavage of pBR322 plasmid DNA. $^{\cdot}OH$ generation reactions in the absence and presence of $H_2O_2$ under various conditions were also investigated. Although both the $Fe^{2+}$ autoxidation and Fenton-type reactions showed DNA cleavage and $^{\cdot}OH$ generation, there were significant differences in their efficiencies and reaction rates. The rate and efficiency of the cleavage reaction were higher in the absence of 1.0 mM of $H_2O_2$ than in its presence in 20 mM phosphate buffer. In contrast, the $^{\cdot}OH$ generation reaction was more prominent in the presence of $H_2O_2$ and showed a pH-independent, fast initial reaction rate, but the rate was decreased in the absence of $H_2O_2$ at across the entire tested pH range. Studies using radical scavengers on DNA cleavage and $^{\cdot}OH$ generation reactions in both the absence and presence of $H_2O_2$ confirmed that both reactions spontaneously involved the active oxygen species $^{\cdot}OH$, ${O_2}^{\cdot-}$, $^1O_2$ and $H_2O_2$, indicating that a similar process may participate in both reactions. Based on the above observations, a new mechanism for the $Fe^{2+}$ autoxidation-induced DNA cleavage reaction is proposed.

• International Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.95-107
• /
• 2007

The present study examined generational differences in ethnicity maintenance among Korean-Chinese to understand the impact of recent social change on a Korean-Chinese ethnic community in China. A total of 1355 Korean-Chinese (557 parents and 798 children), who live in Shenyang, China, participated in this study. The subjects were asked about their language use during daily conversations and cultural activities. They were also asked about their ethnic identity and perceptions of social distance from Chinese people. The results reveal that the Korean-Chinese parent generation is more likely to maintain its ethnic language, while the child generation is more likely to maintain its ethnic culture. Second, more parents than children considered themselves as 'Korean-Chinese' rather than 'Chinese'. Third, members of the child generation show less social distance from Chinese people than do the parent generation. These results show a strong tendency towards ethnicity maintenance among Korean Chinese as well as recent changes in the community. This study argues for the importance of school education and school environment in maintaining the ethnic language and culture of Korean-Chinese children.

• International Journal of Contents
• /
• v.10 no.3
• /
• pp.9-16
• /
• 2014

Depth-image-based rendering is generally used in real-time 2D-to-3D conversion for 3DTV. However, inaccurate depth maps cause flickering issues between image frames in a video sequence, resulting in eye fatigue while viewing 3DTV. To resolve this flickering issue, we propose a new 2D-to-3D conversion scheme based on fast and robust depth-map generation from a 2D video sequence. The proposed depth-map generation algorithm divides an input video sequence into several cuts using a color histogram. The initial depth of each cut is assigned based on a hypothesized depth-gradient model. The initial depth map of the current frame is refined using color and motion information. Thereafter, the depth map of the next frame is updated using the difference image to reduce depth flickering. The experimental results confirm that the proposed scheme performs real-time 2D-to-3D conversions effectively and reduces human eye fatigue.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.15-21
• /
• 2009

High-order harmonic generation from a solid surface affected by the contrast of a laser pulse was studied using an oscillating mirror model. High-order harmonics generated from solid surfaces have unusual properties such as spectral redshift, and an intensity difference between even- and odd-order harmonics which is not reported for high-order harmonics generated by a gas medium. We confirmed that high-order harmonics from solid surfaces have selectivity of polarization as well as cut-off extension and the enhancement of conversion efficiency proportional to laser intensity. And the principle of operation and the characteristics of a plasma mirror system developed for achieving high contrast laser pulses to pursue the experimental realization of high-harmonic generation from solid surfaces are reported. Energy fluence on the plasma mirrors is tunable between $10\;J/cm^2$ and $1000\;J/cm^2$ and around 1000 shots are available before the plasma mirrors require replacement.