• Journal of the Korean Ceramic Society
• /
• v.29 no.4
• /
• pp.328-334
• /
• 1992

TiO2 sols were prepared by hydrolysis and polymerization of titanium tetra-isopropoxide (TTIP) in the presence of diethanolamine (DEA). The optimal mole ratio of water to TTIP is 2 and the concentration of the TiO2 sol 0.7 M. Golden TiN films without cracks were obtained by dipping Si(110) wafers into the TiO2 sol and followed by nitridation in NH3 at 1100$^{\circ}C$ for 5 h. The TiN films were studied by an optical microscope, DTA, TGA and X-ray analysis.

• Journal of the Korean Ceramic Society
• /
• v.42 no.6 s.277
• /
• pp.432-436
• /
• 2005

Nickel powders synthesized by the reduction of hydrazine of nickel salts fiom diethanolamine(DEA) solution, and investigated the morphological characteristics of nickel powders with the addition of hydrazine, reaction temperature, the composition of mixed solvents. The addition of hydrazine in DEA solution largely affected on size control of nickel powders. Under $N_2H_4/Ni^{2+}$ molar ratio= 1.5 and 2.0 conditions, spherical nickel powders in the submicron range obtained, owing to higher the reduction rate. An increase of temperature increased the size of nickel particles. At $220^{\circ}C$ for 40 min, the nickel powders composed of polyhedral particles with high crystalline in the submicron range. The mixed volume ratio of TEA to DEA affected on the increase of particle size and the inhibition of agglomerate between particles.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.5
• /
• pp.329-332
• /
• 2005

HPMC-based novel gel formulations for the transdermal delivery of testosterone (TS) were developed, and the effect of various skin permeation enhancers was studied in vitro and in vivo. In vitro hairless mouse skin permeation of TS from the gel was investigated using Keshary-Chien diffusion cells for 8 hours at $37^{\circ}C$. In vivo plasma concentration profiles of TS after applying the gel on the abdominal skin of rat were determined using a commercial radioimmunoassay kit. Hairless mouse skin permeation of TS increased with the addition of permeation enhancers both in vitro and in vivo. Combination of diethanolamine (2%) and N-methylpyrrolidone (NMP, 6%) was the most effective among tested. Plasma concentration of TS significantly increased for at least 24 hours with the addition of diethanolamine and NMP. These results suggest the feasibility of the development of a HPMC-based gel formulation for the transdermal delivery of TS.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.270-276
• /
• 2005

This study was conducted to examine whether a specific synthetic metalworking fluid (MWF), "A", in use for 10 months without replacement, displayed microbial resistance and to identify the additives associated with the control of microbial growth. Three synthetic MWF products ("A", "B", and "C") were studied every week for two months. Microbial deterioration of the fluids was assessed through evaluation by endotoxin, bacteria and fungi levels in the MWFs. In addition, formaldehyde, boron, ethanolamine, and copper levels were also studied to determine whether they influence microbial growth in water-based MWFs. Throughout the entire study in the sump where MWF "A" was used, bacteria counts were lower than 103 CFU/mL, and endotoxins never exceeded 103 EU/mL. These levels were significantly lower than levels observed in sumps badly deteriorated with microbes. Boron levels in MWF "A" ranged from 91.7 to 129.6 ppm, which was significantly higher than boron levels found in other MWF products. The total level of ethanolamine (EA) in MWF "A" ranged from 35,595 to 57,857 ppm (average 40,903 ppm), which was over ten times higher than that found in other MWFs. Monoethanolamine (MEA), diethanolamine (DEA) and triethanolamine (TEA) concentrations in MWF "A" were also significantly higher than seen in other MWFs. However, although EA and boron might improve anti-microbial performance, their abuse can pose a serious risk to workers who handle MWFs. From an industrial hygiene perspective, our study results stress that the positive synergistic effect of boron and EA in reducing microbial activity in MWF must be balanced with the potentially negative health effects of such additives. Our study also addresses the disadvantage of failing to comprehensively report MWF additives on Material Safety Data Sheets (MSDS). Future research in MWF formulation is needed to find the best level of EA and boron for achieving optimal synergistic anti-microbial effects while minimizing employee health hazards.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.320-325
• /
• 2007

Nickel powders were prepared from an aqueous nickel acetate solution and hydrazine hydrate using diethanolamine as the nonaqueous organic solvent in the conventional and microwave synthetic method. It was investigated that microwave non-thermal effect and synthetic condition affect the preparation of nickel powders by means of X-ray diffractometry, scanning electron microscopy, thermal gravymetry analysis, and X-ray photoelectron spectroscopy analysis. Compared with the conventional synthetic method, less of aggregation, smaller particle size, and more uniform distribution of particle size were obtained in the microwave synthetic method due to the non-thermal effect of microwaves.

• Korean Journal of Materials Research
• /
• v.26 no.2
• /
• pp.84-89
• /
• 2016

We present the rectifying and nitrogen monoxide (NO) gas sensing properties of an oxide semiconductor heterostructure composed of n-type zinc oxide (ZnO) and p-type copper oxide thin layers. A CuO thin layer was first formed on an indium-tin-oxide-coated glass substrate by sol-gel spin coating method using copper acetate monohydrate and diethanolamine as precursors; then, to form a p-n oxide heterostructure, a ZnO thin layer was spin-coated on the CuO layer using copper zinc dihydrate and diethanolamine. The crystalline structures and microstructures of the heterojunction materials were examined using X-ray diffraction and scanning electron microscopy. The observed current-voltage characteristics of the p-n oxide heterostructure showed a non-linear diode-like rectifying behavior at various temperatures ranging from room temperature to $200^{\circ}C$. When the spin-coated ZnO/CuO heterojunction was exposed to the acceptor gas NO in dry air, a significant increase in the forward diode current of the p-n junction was observed. It was found that the NO gas response of the ZnO/CuO heterostructure exhibited a maximum value at an operating temperature as low as $100^{\circ}C$ and increased gradually with increasing of the NO gas concentration up to 30 ppm. The experimental results indicate that the spin-coated ZnO/CuO heterojunction structure has significant potential applications for gas sensors and other oxide electronics.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.23-25
• /
• 2003

Effect of chemically modified precursor solution on YBCO coated conductor prepared by MOD-TFA method was investigated. YBCO thin films were deposited on (l00)-oriented single crystalline LaAlO$_3$ substrates by conventional MOD-TFA process. The microstructures of YBCO thin films contain maze-like patterns. The origin of this microstructure was delineated by compositional inhomogeneity during the pyrolysis process and it was shown that addition of diethanolamine (DEA) improve the microstructure of grown YBCO films. In addition, it was demonstrated that the chemical modification of precursor solution makes no harmful effect on biaxial texture of YBCO thin films.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.1
• /
• pp.85-90
• /
• 1998

The reaction rate of $CO_2$ with 2-amino-2-methyl-1-propanol (AMP), MEA monoethanolamine(MEA) and diethanolamine (DEA) in aqueous solutions has been determined using a stirred vessel with a plane gas-liquid interface over a wide range of concentrations of amines at different temperatures. The results show that the overall reaction rate is first order with respect to both $CO_2$ and amine. The reaction rate constant varies with temperature according to the relationship which agrees with the experimental data. The proposed interpretation is that the kinetic rate determining step is a reaction of $CO_2$ with amine to form carbamic acid which is then totally and immediately ionized.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.1
• /
• pp.25-38
• /
• 1998

The developing agent is the materials which first acts on silver grain and make it into metallic silver by reducing reaction. There are several types in developing agent, and according to Lumiere-Andresen principle, substitution product which has amino or hydroxyl group in benzen nucleus has a developing power, but all reduing substances are not in used. In the developing effect, not only the role of developing agent but also that of assistant materials are important. But in this work, we have studied effect, change by lith developing agent which require high contrast image. We made an developing experiment after having manufactured developing solution used hydroquinone and another developing agents like chlorohydroquinone, pyrocatechol and pyrogallol as developing agent. And we added that did in addition of diethanolamine and ascorbic acid, and then we examined the possibility of use.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.715-718
• /
• 2005

The purpose of this paper is to investigate on hydration, setting time and compressive strength properties of cement paste mixed alkali-free accelerator using aluminum sulfate for shotcrete. The experimental focus is to variouse added element with alkali-free accelerator for shotcrete using aluminum sulfate. When diethanolamine was used as a component of alkali-free accelerator, alkali-free accelerator contributed to increasing early hydration, setting time and compressive strength properties of cement paste and mortar.