• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.843-849
• /
• 1998

A voltage controlled oscillator using dielectric resonator for 2.4 GHz WLL System is designed and fabricated. To improve the phase noise characteristic resonator is used as an inductor of VCO. At the bias condition of 5 V and 10 mA, the output power and phase noise in the operating frequency range of 2210~2240 MHz are 0 dBm and 100 dBc/Hz 10 kHz offset from the carrier, respectively. The phase noise and harmonic response of fabricated VCO are suitable for WLL system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.149-152
• /
• 2000

AC impedance measurements on poly-p-phenylenevinylene (PPV) LEDs in the frequency range between 10 Hz and 10$\^$6/ Hz were carried out. The complex-plane impedance spectra indicate that PPV devices can be represented by equivalent circuits that corresponds to the bulk and interfacial regions at high and low frequencies, respectively. As a result of complex impedance analysis through the separation of bulk and interfacial region impedances, increase of forward bias in Al/PPV/ITO devices gave rise to relative decrease of the interfacial region impedance. Above the electric field of 10$\^$6/ V/cm the PPV device showed a space charge limited current (SCLC) conduction. The dependence of the transport mechanism and dielectric properties on the applied bias voltage is discussed.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.5
• /
• pp.236-240
• /
• 2004

In this paper we examine the reflection characteristics of dielectric microstrip lines with open-ended termination containing an optically induced plasma region, which are analyzed by the assumption that the plasma is distributed homogeneously in laser illumination. The characteristics impedances resulting from the presence of plasma are evaluated by the transmission line model. To estimate theoretically the characteristic response of identical systems in the time domain, the Fourier transformation method is evaluated. The reflection characteristics of time and frequency response in microwave systems have been calculated using an equivalent circuit model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.90-91
• /
• 2009

We study of the variation on non-uniform plasma in different layer of the semiconductor. The transient response in different plasma layer has been evaluated theoretically. The reflection function of dielectric microstrip lines resulting from the presence of plasma are evaluated by the transmission line model. The diffusion length is small compared to the absorption depth. The variation of characteristic response in plasma layer with microwave pulses which has in localized has been evaluated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.76-82
• /
• 2009

In this papers, Study on the Bonding property and Strength Evaluation in Bonding interface Joints of Dissimilar material using DOE. We found optimal condition that uses experimental design method (Response Surface Analysis, DOE) used temperature, pressure, time on experiment factor. And we could get bonding condition and strength that break and crack do not happen in mechanical processing about united dissimilar material. And progress 3 point bending tests and verified result.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.691-694
• /
• 2006

So far, we have done much research improving quality of LCD TV. Recently, we have developed 26" WXGA LCD TV by advance fringe field switching (AFFS) technology with smooth and every scene realistic in color image that obtained from the amazing authentic color delivery, optical characteristic and fast response time. Our upgrade device has shown the brightness over 600nits (Color shift <0.015 and Transmittance ratio > 5.5%), gray to gray response time under 6ms, contrast ratio over 1200:1 and viewing angle over 178/178, respectively. And also, motion artifacts improved by fast response of LC with low viscosity, cell gap and dielectric constant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.563-566
• /
• 2004

We have studied a electrically controlled birefringence (ECB) mode for field sequential liquid crystal display (FSLCD). We measured response time of the ECB mode. The ECB mode exhibiting fast response time, high transmittance, low operating voltage and adequate viewing angle. The positive liquid crystal (LC) is better than negative LC on dielectric anisotropy, birefringence and rotational viscosity. So that, the ECB mode is one of strongest candidate for FSLCD application.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.211-216
• /
• 1995

In this study, the piezoelectric ceramics/polymer composite transducers with 1-3 connectivity have been studied. A piezoelectric ceramics PZT prepared by Wet-Dry Combination method was used as a filler in polymer matrix Eccogel. We've got the pulse-echo response for 1-3 type piezc-electric composite transducers in water. It was shown that the transmitting and receiving sensitivity of 1-3 type piezoelectric composite transducers could be improved in comparison with that- of solid PZT transducers. The reason is for that 1-3 type Piezoelectric composites have low dielectric constant and density. There was in a good agreement between the resonant frequencies calculated from one period and observed results on the Ultrasonic Transducer Analyzer. According to these results we could be figured out the distance in water by virture of the pulse-echo response.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1187-1190
• /
• 2004

In this paper we analyze the reflection characteristics of a dielectric microstrip line with an open-end termination containing optically induced plasma region, which are analyzed by the assumption that the plasma is distributed homogeneously in the laser illumination. The characteristics impedances resulting from the presence of plasma are evaluated the transmission line model. To estimate theoretically the characteristic response of same systems in the time domain, the Fourier transformation method is evaluated. The reflection characteristics of time response in microwave systems have been calculated.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.8
• /
• pp.392-398
• /
• 2006

The properties of tunable dielectric materials on RF frequency band are important high tunability and low loss for RF variable devices, variable capacitor, phased array antenna and other components application. Various composite of BST(barium strontium titanate) ratio combined with other non-electrical active oxide ceramics have been formulated for such uses. We present the tunable properties and Curie temperature on BST thick films. The grain growth of the weight ratio of $BaTiO_3$ increased. This can be explained by the substitute $Sr^{2+}$ ion for $Ba^{2+}$ ion in the $BaTiO_3$ system. The Curie temperature was shifted to lower temperature with increasing $SrTiO_3$in the $BaTiO_3-SrTiO_3$ system, because of decreasing the lattice constant. Also, the dielectric constant, tunability and K-factor of $(Ba_xSr_{1-x})TiO_3$ at over the Curie temperature decreased, at over the $60^{\circ}C$ fixation, maximum dielectric constant at Curie temperature and hence sharper phase transformation occurred at Curie temperature. The result were interpreted as a process of internal stress relaxation resulting form the increase of $90^{\circ}$ domains induced the BST. As a result, It is concluded that over the Curie temperature, frequency response and DC field effect for the tunable properties of BST thick film are suppressed by the transition broadening. For the application of tunable devices, that the curie temperature was investigated to be increased.