• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.17-20
• /
• 2005

In this paper, we presented the quasi-static characteristics of novel microstrip lines with anisotropic grooved dielectric in finite metal. A quasi-static mode-matching method has been used to analyze this new structure and the simulation results are validated through comparison with other available results. The results in this paper show that it is possible to control the propagation characteristics of microstrip lines with the use of anisotropic grooved dielectric in finite metal. Also anisotropic grooved dielectric in microstrip line can be newly added to the design parameters of high performance three dimensional monolithic microwave circuits and other microwave applications.

• 한국정보전자통신기술학회논문지
• /
• 제2권2호
• /
• pp.63-68
• /
• 2009

We study on the transient response in non-uniform microstrip lines with optically controlled microwave pulses. The transient response of the microwave pulses in plasma layer has been evaluated by reflection function of dielectric microstrip lines. The variation of characteristic response in plasma layer with localized pulses has been evaluated analytically. Reflection the change of the reflection amplitude has been observed.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.37-44
• /
• 2004

본 논문에서는 RF 부품 수동소자 중 가장 기본적인 요소가 되는 전송선로를 DAML(Dtelectric-supported Airbridge Microstrip Line) 형태의 새로운 구조로 제안하였으며, DAMS(Micro Electro Mechanical System) 기술 중 표면 마이크로머싱닝(surface micromachining) 기법을 이용하여 구현하였다. 제안된 구조는 마이크로스트립 라인(microstrip line)의 응용 형태로서 기존의 신호선(signal line)과 ground 사이에 유전체 지지대(dielectric post)를 사용하였고, 신호선을 공중으로 띄우면서 넓은 범위의 임피던스에서 유전체 손실(dielectric loss)을 최소화하였다. 본 논문에서 제작된 전송선로는 10 ㎛의 신호선의 높이와 10 ㎛ × 10 ㎛의 지지대(Post) 면적과 9 ㎛의 지지대(post)의 높이와 5 mm의 길이로 제작되었다. 50 GHz에서 일반적인 마이크로스티립(microstrip) 전송선의 손실이 약 7.5 dB/cm 이상 되는 것과 비교하여 본 논문에서 제안한 구조에서는 50 GHz에서 전송선의 손실이 약 1.1 dB/cm가 되는 것을 얻었다.

• 한국통신학회논문지
• /
• 제29권1A호
• /
• pp.77-83
• /
• 2004

초고주파 회로에서 광범위하게 이용되는 평행 결합 마이크로스트립 대역통과필터는 좁은 대역폭 과 2차 스프리어스 통과대역으로 필터의 응용을 제한한다. 이와 같은 문제를 해결하기 위해서 복합 유전체기판상에 비대칭 결합 마이크로스트립 선로를 이용하는 방법을 제시하였다. closed-form해석방법을 이용하여 복합 유전체기판상에 비대칭 결합 마이크로스트립 선로를 해석하고 중심주파수 9GHz 에서 정규화 대역폭 $33\%$을 갖는 필터를 제작하였다. 단층기판을 갖는 필터와 비교하면 복합 유전체기판을 이용한 필터는 스프리어스 통과대역이 약 20dB 이상 개선됨을 보였다

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.135-138
• /
• 1998

This paper presents the results of measured permittivity of PCB sheet material in the frequency range of 0.1[GHz] - 2[GHz] and temperature range of $25[^{\circ}C]$ - $85[^{\circ}C]$. Microstrip lines with different physical length are implemented to measure the attenuation and phase shift of the signals though these lines. The loss factor of these materials could be obtained with the dielectric constant and the attenuation of the microstrip lines.

• Transactions on Electrical and Electronic Materials
• /
• 제10권2호
• /
• pp.53-57
• /
• 2009

In this paper we develop a method to observe faults in semiconductor devices and transmission lines by calculating the variation of the reflection function in a dielectric microstrip line that has an open-ended termination containing an optically induced plasma region. It is analyzed with the assumption that the plasma is distributed homogeneously in laser illumination. With the non linear material of degradation, the concentration of the carrier in the part of the material has changed. Since the input wave has produced the phenomenon of reflection, the input signal to the open-ended microstrip lines can be observed on reflection to identify the location of the fault. The characteristic impedances resulting from the presence of plasma are evaluated by the transmission line model. The variation of the reflection wave in the microwave system has been calculated by using an equivalent circuit model. The transient response has been also evaluated theoretically for changing the phase of the variation in the reflection. The variation of characteristic response in differentially localized has been also evaluated analytically.

• 대한전자공학회논문지
• /
• 제25권2호
• /
• pp.139-143
• /
• 1988

A new measurement method of coupled transmission line characteristics is described. This method presents precision values of even-and odd-mode impedances as well as effective dielectric constants of symmetric parallel coupled microstrip lines from the scalar quantities obtained by transmission coefficients at two different resonance frequencies. Especially these values include dispersion effects in the measured frequency band. The measured impedances and effective dielectric constants of actually fabricated coupled lines on the Teflon substrates with low dielectric constants are good agreement with predicted values. And the experimental pass band characteristics of single section resonator by using previously designed coupled lines agree well with theoretical values.

• Journal of Electrical Engineering and information Science
• /
• 제1권2호
• /
• pp.96-100
• /
• 1996

This paper describes a concrete method for computing characteristic impedances and effective dielectric constants of the microstrip coupled lines without and with a dielectric overlay. The frequency-independent spectral domain method is used for the analysis of these lines. This method is a powerful, accurate, and numerically efficient approach for planar transmission line structure. For designing the optimal directional coupler, the velocities of even and odd mode must be equal but velocities of these two modes are different in the conventional coupled line which is inhomogeneous. The results show that these two velocities can be almost same according to variations of structural and material parameters in terms of the overlay(superstrate).

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권2호
• /
• pp.11-15
• /
• 2002

High speed probe for measurement of sin91e flux quantum circuits is comprised of coaxial cables and microstrip lines in order to carry high speed signals without loss. For the impedance matching between coaxial cable and microstrip line, we have determined the dimension of the microstrip line with 50${\Omega}$ impedance by simulation and then have investigated the effect of line width and cross-sectional shape of signal line, dielectric material, thickness of soldering lead at the coaxial-to-microstrip transition Point, and the an91c between dielectric material and end part of the signal line on the characteristics of signal transmission of the microstrip line. From the simulation, we have found that these all parameter's had influenced on the characteristic of signal transmission on the microstrip line and should be reflected in fabricating high speed probe, We have also determined the dimension of coplanar waveguide to fabricate testing sample for performance test of high speed probe.

• 한국통신학회논문지
• /
• 제25권3A호
• /
• pp.424-429
• /
• 2000

본 논문에서는 준정적 해석방법을 사용하여 다층 구조에서 유한한 도체 두께를 갖는 비대칭결합 마이크로스트립(ACM: Asymmetric Couple Microstrip) 선로의 특성을 연구하였다. 준정적 해석방법으로서 모드정합법을 이용하였으며, ACM 선로의 특성 임피던스와 유효 유전율 상수가 도체 두께의 함수로 나타나는 결과를 얻었다. 수치해석 결과를 통해서 단층 및 다층구조에서 도체 두께의 변화로 인하여 ACM 선로의 전파특성이 변화되는 것으로 나타났다.