• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.434-442
• /
• 1995

To improve dielectric and mechanical properties of insulating composite by plasma surface treatment, new plasma surface treatment process is designed with concentric and hemi-circle electrodes system. the plasma, which is generated between anode and cathode, is induced to the upper side of the electrode system and treats the surface of the insulators. The optimal surface treatment condition is that pressure : 0.5[torr], flux density : 100[gauss], discharge current : 500[mA] and treatment time : 3 minutes. The composite filled with glass cloth surface-treated by plasma shows the improvement in electric and mechanical properties, comparing non- and coupling agent treated samples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.353-355
• /
• 1989

Composite insulating materials have the defect of interface. To minimize the defect of interface of GFRP (glass cloth reinforced plastics), coupling agent is treated. In this paper, the method of coupling agent treatment has been studied. The result shows that the optimum electric and mechanical properties is obtained for the sample treated on the glass fiber with 0.3% amino silane water solution.

• 전자공학회논문지D
• /
• 제34D권7호
• /
• pp.15-22
• /
• 1997

A 10Gbit/s limiting amplifier IC for optical transmission system was implemented with AlGaAs HBT (heterojunction bipolar transistor) technology. HBTs with 2x10.mu. $m^{2}$ and 6x20.mu. $m^{2}$ emitter size were used. The HBT structures are based on metal-organic chemical vapor deposition (MOCVD) epitxy and employ a mesa structure with self-aligned emitter/base and sidewall dielectric passivation. IC was designed to support differnetial input and output. Small signal performance of the packaged IC showed 26dB gain and $f_{3dB}$ of 8GHz. A single ouput has 800m $V_{p-p}$ swing with more than 26dB dynamic range. The performance of the limiting amplifier was verified through single mode fiber320km transmission link test.est.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.871-878
• /
• 2000

본 연구는 3mol% Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$가 첨가된 상경계 영역의 Pb(Zr,Ti)O$_3$(PSN-PZT) 세라믹스에 대하여 RT66A와 광섬유센서를 이용하여, 교류강전계 하에서 압전 및 유전특성을 조사하였다. PSN-PZT 세라믹스의 압전 및 유전 특성에 미치는 non-180$^{\circ}$분역 재배열의 영향을 평가하기 위하여 RT66A와 MTI-2000 Fotonic$^{TM}$ sensor를 이용하여 인가전계와 주파수의 함수로 전계유기변위를 측정하였다. 그 결과, 교류강전계 하에서 전계유기변위는 강전계, 저주파수에서 큰 이력현상을 나타내고, 전계유기변위로부터 결정된 유효압전상수는 주파수가 감소할수록 증가하는 거동을 나타내고 있으며, 이러한 거동은 non-180$^{\circ}$분역 재배열의 영향으로 해석되었다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권5호
• /
• pp.206-206
• /
• 2003

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, glass surface was treated by plasma to examine the effect of dry interface treatment without coupling agent. It was identified that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권5호
• /
• pp.206-212
• /
• 2003

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, glass surface was treated by plasma to examine the effect of dry interface treatment without coupling agent. It was identified that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.965-966
• /
• 2007

For practical electrical insulation design of high temperature superconducting (HTS) power apparatuses, knowledge of the dielectric behavior of insulators in cryogenic liquid such as liquid nitrogen ($LN_2$) is essential. So in this paper, we discussed experimental investigations of breakdown and V-t characteristics of several insulators such as Kapton and glass fiber reinforced plastic (GFRP) that are candidates of insulator for HTS apparatus in cryogenic liquid. And we investigated the degradation of these insulation samples after breakdown with the microscope and SEM photograph. Moreover, survival and hazard analysis was performed.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.868-873
• /
• 1986

The Schottky barrier diode has been used as an element of the mixer inspite of its conversion loss. In this paper the use of a GaAs MESFET is shown as a device of mixer, and the conversion gain is obtained. Also, input matching circuits aredesigned by s-parameter and fabricated on a dielectric teflon epoxy fiber glass substrate. According to the results, the conversion gain is 9 dB at the signal frequency of 4 GHz and the intermediate frequency of 1.217GHz.

• 공업화학
• /
• 제24권3호
• /
• pp.219-226
• /
• 2013

차세대 전자 디스플레이 관련 제품의 휴대편리성, 유연성, 경량화, 대형화 등의 요구조건을 확보할 수 있는 유기반도체 소재기반 소프트 일렉트로닉스에 많은 관심이 모아지고 있다. 소프트 일렉트로닉스의 응용분야로는 전자 신문, 전자 책, 스마트카드, RFID 태그, 태양전지, 휴대용 컴퓨터, 센서, 메모리 등이 있으며, 핵심소자는 유기 전계효과 트랜지스터(organic field-effect transistor, OFET)이다. OFET의 고성능화를 위해서는 유기반도체, 절연체, 전극 구성소재들이 최적화 구조를 형성하도록 적층되어야 한다. 필름형성화 과정에서 대부분의 유기반도체 소재는 결합력이 약한 van der Waals 결합으로 자기조립 결정구조를 형성하므로, 이들의 결정성 필름구조는 주위 환경(공정변수 및 기질특성)에 의해 크게 달라진다. 특히 기질의 표면 에너지(surface energy) 및 표면 거칠기(surface roughness)에 따라 유기반도체 박막 내 결정 구조 및 배향 등은 크게 달라져, OFET의 전기적 특성에 큰 차이를 미친다. 유기친화적 절연층 소재 및 표면개질화는 전하이동에 유리하도록 용액 및 증착공정 유기반도체 박막의 결정구조 및 배향을 유도시켜 OFET의 전기적 성능을 향상시킬 수 있다.

• 한국진공학회지
• /
• 제6권3호
• /
• pp.220-226
• /
• 1997

실리콘 미세가공기술로 형성된 프레임 모양의 실리콘 기판에 의해 지지되는 -$Si_3N_4/300 nm-SiO_2/150 nm-Si_3N_4$ 광반사막을 제조하였으며, 이것을 광섬유와 결합하여 강도형 다모드 광섬유 압력센서를 제작하고 그 특성을 조사하였다. $Si_3N_4/SiO_2/Si_3N_4$다아아 프램을 광반사막으로 사용하기 위하여 이 다이아프램의 뒷면에 NiCr 및 Au 박막을 각각 진 공증착하여 광반사막에서의 광투과에 의한 광손실을 수%로 감소시킬 수 있었다. 유전체 다 이아프램의 상하에 각각 있는 $Si_3N_4$막은 KOH 수용액에 의한 실리콘 이방성 식각시 자동식 각 정지층 역할을 하여 다이아프램 두께의 재현성이 우수하였다. 다이아프램의 크기가 3$\times$ 3$\textrm{mm}^2$, 4$\times$4$\textrm{mm}^2$ 및 5$\times$5$\textrm{mm}^2$인 센서는 각각 0~126.64kPa, 0~79.98kPa 및 0~46.66kPa의 압력범위에서 선형적인 광출력-압력 특성을 나타내었으며, 이들 센서의 압력감도는 각각 약 20.69nW/kPa, 26.70nW/kPa 및 39.33nW/kPa로서, 다이아프램의 크기가 증가할수록 압력감 도도 증가하였다.