• Clean Technology
• /
• v.6 no.2
• /
• pp.121-127
• /
• 2000

There are several kinds of hazardous materials in incinerator flue gas, such as particulate matter, acid gas, heavy metal, dioxin, etc. The activated carbon adsorption is considered as one of the methods removing dioxin from flue gas. Without any additional equipment and facilities, the activated carbon was mixed with lime and sprayed in the semi-drying reactor of an incinerator and filtered in the bag filter, and its efficiency of removing hazardous organic material was investigated. 1,2-dichlorobenzene (o-DCB) was used as a precursor material of dioxin and the effects of the activated carbon amount, the operating temperature of the reactor, and the atomizer r.p.m were measured and analyzed. Experimental results showed that the optimum outlet temperature of the reactor was $145^{\circ}C$ considering the performance of the bag filter, and the adsorption performance improved with the increase of the atomizer r.p.m. Also the performance of removing o-DCB in the bag filter is higher than of the semi-drying reactor.

• Clean Technology
• /
• v.6 no.2
• /
• pp.113-119
• /
• 2000

Due to the toxicity of dioxin in the incinerator flue gas, it becomes a severe social problem. Activated carbon adsorption process is one of the methods for removing dioxin in the flue gas and was investigated its performance for removing hazardous organic compounds. Since dioxin is very hazardous material, 1,2-dichlorobenzene(o-DCB), one of the precursor material of dioxin, was used as adsorbate. The effects of air flow rate, pressure drop in the bag filter, operation temperature of bag filter, and kinds of adsorbents on the removal of o-DCB were measured and analysed. Experimental results showed that the operating temperature was recommended within the range of $140{\sim}170^{\circ}C$ considering the operating condition of incinerator. Also it was necessary to maintain the pressure drop of bag filter $120mmH_2O$ for enhancing the adsorption at the surface layer of activated carbon formed on the bag filter. The use of mixture of same amount of activated carbon and diatomite showed more than 90% removal of o-DCB and also reduced the consumption of activated carbon.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.120-124
• /
• 2010

$TiO_2$ and N-substituted $TiO_{2-x}N_x$ were synthesized by using precipitation method. $TiO_{2-x}N_x$ compound absorbed whole UV light as well as long wavelength of visible light (400 - 700 nm) because of the change of band gap from 3.2 eV to 1.77 eV. Results obtained revealed that $TiO_{2-x}N_x$ showed higher activity than pure $TiO_2$ or P-25 for visible-photocatalytic degradation of 1,4-dichlorobenzene.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.464-468
• /
• 2012

Three solvent systems, chlorobenzene (ink 1), chlorobenzene/o-dichlorobenzene (ink 2) and chlorobenzene/tetrahydronaphthalene (ink 3), were compared as printable inks for the fabrication of polymer light-emitting diodes (PLEDs) using poly[2-methoxy-5-(2-ethylhexyl-oxyl)-1,4-phenylenevinylene (MEH-PPV) as an emissive material and an inkjet printer (Fujifilm Dimatix DMP-2831). Ink 1 clogged the printer's nozzle and gave non-uniform film. Inks 2 and 3 were used to fabricate PLEDs with ITO/PEDOT:PSS/MEH-PPV/LiF/Al configurations. The best performance (turn-on voltage, 3.5 V; luminance efficiency, 0.17 cd/A; luminance, 1,800 cd/m) was obtained when ink 3 was used to form the emissive layer (thickness, 49 nm), attributable to the better morphology and suitable thickness of the MEH-PPV layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.45-45
• /
• 2008

In recent years, new materials and technology has been developed using single-walled carbon nanotubes (SWCNTs) as an alternative to indium tin oxide (ITO) to fulfil the requirements towards novel technological drive. These technologies offer products having a broad range of conductivity, excellent transparency, neutral color tone, good adhesion, abrasion resistance as well as mechanical robustness. In addition, SWCNTs can be solution processed to replace the sophisticated vacuum techniques at high temperatures. In the present work, transparent conducting films were fabricated from the purified SWCNTs. Dispersion of purified SWCNTs was accomplished in 1,2-dichlorobenzene without using surfactants or polymers following ultrasonic process. We achieved coating of nanotubes film on poly ether suiphone (PES) for an average sheet resistance ~110 ${\Omega}/{\Box}$ of optical transmittance 80% at 550 nm. Conventional spin coating method was followed to fabricate films from the purified and dispersed nanotubes solution. The results will be presented.

• Journal of Environmental Science International
• /
• v.14 no.5
• /
• pp.513-520
• /
• 2005

For the destruction of toxic chlorinated organic compounds, this study proposes improved supercritical water oxidation method (multistep oxidation) using sodium nitrate as an oxidizer. This method solves the problems involved in the existing supercritical water oxidation method. Multistep oxidation means that $NaNO_3$ is oxidized to $N_2\;via\;NaNO_2$ and NO. Toxic and hard to destroy organic substances like para-dichlorobenzen(4-DCBz), polychlorinate biphenyl(PCB) ware oxidized to non toxic substances in a condition, in which rapid pressure and temperature rise is restrained as much as possible. 4-dichlorobenzene(4-DCBz) and Polychlorinate biphenyl(PCB) in condition$(450^{\circ}C,\;p_w=0.25g/cm^3,\;30min)$ Was discomposed perfectly.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.6
• /
• pp.486-492
• /
• 2006

In this research, IAQ is measured to evaluate the emission performance of VOCs in three new apartment houses finished by totally EFMs (Environmental Friendly Material), partially installed EFMs and general materials. Among various VOCs, Target pollutants for the IAQ measurement are benzene, ethylbenzene, toluene, xylene, 1,4-Dichlorobenzene and formaldehyde. The measurement is conducted one day after each interior finishing material is worked over by construction schedule. The result of this research concluded that (1) Except toluene, the concentration levels of each pollutant did not exceed the national IAQ standards in all test residences, (2) As the interior finishing work schedule, A toluene level peaked when the furniture installing was ended. (3) The toluene concentration level of the house installed general interior materials as the non-EFMs furniture was one and half higher than other houses. Consequently, installing. the furniture made by EFMs is one of effective methods to improve the IAQ for new apartment houses.

• Environmental Analysis Health and Toxicology
• /
• v.11 no.1_2
• /
• pp.41-47
• /
• 1996

1, 2, 4-Trichlorobenzene (1, 2, 4-TCB) is used as a dye carrier, as an intermediate in the synthesis of herbicides, as a flame retardant, and for other purpose. After a single oral administration of 1, 2, 4-TCB (200 mg/kg, 400 mg/kg) in rats, toxic effects were studied by means of serum biochemical and heatological analysis, and liver calcium concentration. Administration of 1, 2, 4-TCB resulted in dose-dependent liver and kidney damage as estimated by increased serum alanine aminotransferase (ALT) activities, liver calcium concentration and blood urea nitrogen (BUN). Pretreatment with DL-buthionine sulfoximine (BSO, 2 mmol/kg, i.p. ) considerably decreased liver glutathione concentration, which was accompanied by markedly elevated serum ALT activites. It is well-known that toxicity of halogenated benzene such as bromobenzene, 1, 4-dichlorobenzene is increased by pretreatment of henobarbital (PB), and protected by pretreatment of cytochrome P450 inhibitor including metyrapone (MP). However, there was no obvious alterations in toxicity of 1, 2, 4-TCB by pretreatment of phenobarbital or metyrapone. In comparison with control group, treatment groups exhibited significant changes in some parameters of hematological analysis but all hematological values remined within normal ranges.

• Toxicological Research
• /
• v.12 no.1
• /
• pp.29-34
• /
• 1996

1,2,4-trichlorobenzene (1,2,4-TCB) is used as a dye carrier, an intermediate in the syn[hesis of herbicides, aflame retardant, and for other purpose. After a single oral administration of 1,2,4-TCB (200 mg/kg, 400 mg/kg) in rats, toxic effects were studied by means of serum biochemical and hematological analysis, and liver calcium concentration. Administration of 1,2,4-TCB resulted in dose-dependent manner liver and kidney damage being suggested by increased serum alanine aminbtransferase (ALT) activities, liver calcium concentration and blood urea nitrogen (BUN). Pretreatment with DL-buthionine sulfoximine (BSO, 2 mmol/kg, i.p.) considerably decreased liver glatathione concentration, which was accompanied by markedly elevated serum ALT activites. It is well-known that toxicity of halogenated benzene such as bromobenzene, 1,4-dichlorobenzene is increased by pretreatment of phenobarbital, and protected by pretreatment of cytochrorn P450 inhibitor including metyrapone. However, there were no obvious alterations in toxicity of 1,2,4-TCB by pretreatment of phenobarbital or metyrapone. In comparison with control group, treatment groups exhibited significant changes in some parameters of hematological analysis but all hematological values remained within normal ranges.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.487-496
• /
• 2014

In this study, three kinds of polymers based on phenothiazine-benzothiadiazole were synthesized by a Suzuki coupling reaction, and the various side-chains were substituted at the nitrogen of phenothiazine. The optical and electrochemical properties of synthesized polymers were analyzed. The results indicate that their absorption ranged from 300 to 700 nm, and also confirmed the ideal highest occupied molecular orbital (HOMO) energy level was about -5.4 eV with low band-gap energy. Photovoltaic devices were fabricated using a photoactive layer composed of a blended solution of the polymer and $PC_{71}BM$ in ortho-dichlorobenzene The device with P2HDPZ-bTP-OBT containing the branched side-chain and long chain showed the best performance; the maximum power conversion efficiency of this device was 2.4% (with $V_{OC}$ : 0.74 V, $J_{SC}$ : $6.9mA/cm^2$, FF : 48.0%).