• 제목/요약/키워드: Diatomite

검색결과 89건 처리시간 0.031초

목질섬유 및 규조토 혼입 시멘트 모르터의 물성에 관한 실험적 연구 (An Experimental Study on the Physical Characteristics of Cement Mortar with Cellulose Fiber and Diatomite)

  • 김경민;박석근;이수용
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2003년도 학술.기술논문발표회
    • /
    • pp.103.2-108
    • /
    • 2003
  • The purpose of this study is to understand the Physical characteristics of cement mortar about humidity control on indoors and wall crack restraint. Experiments were conducted on the strength, water absorption coefficient, drying-shrinking crack, length change, cracks of mortar plaster bases according to mixture rate by mixing cellulose fiber and diatomite into cement mortar. The excellent tensile & bending reinforcement efficiency of cellulose fiber and void filling ability of diatomite proved to be suppressing cracks of cement. And diatomite seems to improve moisture-protection efficiency of cement mortar because of its high water absorption ratio and slow drying speed.

  • PDF

Corrosion behavior of concrete produced with diatomite and zeolite exposed to chlorides

  • Gerengi, Husnu;Kocak, Yilmaz;Jazdzewska, Agata;Kurtay, Mine
    • Computers and Concrete
    • /
    • 제19권2호
    • /
    • pp.161-169
    • /
    • 2017
  • Chloride induced reinforcement corrosion is widely accepted to be the most frequent mechanism causing premature degradation of reinforced concrete structures. The electrochemical impedance of reinforcing steel in diatomite- and zeolite-containing concrete exposed to sodium chloride was assessed. Chemical, physical and mineralogical properties of three concrete samples (20% diatomite, 20% zeolite, and a reference containing neither) were correlated with corrosion investigations. The steel-reinforced samples were exposed to 3.5% NaCl solution for 500 days, and measured every 15 days via EIS method. Results indicated that porosity and capillary spaces increase the diffusion rate of water and electrolytes throughout the concrete, making it more susceptible to cracking. Reinforcement in the reference concrete was the most corroded compare to the zeolite and the diatomite samples.

혼화재료로서 규조토 분말을 사용한 모르타르의 강도 특성 (Strength Characteristics of Mortar with Diatomite Powder as an Admixture)

  • Choi, Jaejin;Park, Hongtae;Kim, Jaewoo
    • 한국재난정보학회 논문집
    • /
    • 제11권3호
    • /
    • pp.329-336
    • /
    • 2015
  • 혼화재료로 사용한 규조토 분말이 모르타르의 강도에 미치는 영향을 검토하기 위하여 시판되고 있는 건조상태의 비소성제품과 소성제품 각 1종류 및 융제소성제품 2종류 등 모두 4종류의 규조토 분말을 사용한 모르타르의 물성실험을 실시하였다. 규조토 분말을 시멘트 질량으로 10% 범위 내에서 대체 사용하고 물-결합재비를 동일하게 한 모르타르 실험결과로서, 소성제품을 사용한 경우는 그 사용량의 증가에 따라 재령 7일, 28일 및 56일의 전체 시험재령에서 압축강도 및 휨강도가 증가하는 경향을 나타냈다. 그러나 비소성제품은 모르타르의 유동성을 저하시켜 단위수량을 크게 증가시키는 문제점이 있었으며, 융제소성제품은 모르타르의 강도개선효과가 나타나지 않았다.

황토와 다공성 규조토 필터에 의한 실내 오염 물질의 흡착 연구 (The Study for Adsorption of Indoor Pollutants by Ocher and Diatomite Filter)

  • 김호건;;남기우
    • 한국산업융합학회 논문집
    • /
    • 제23권4_2호
    • /
    • pp.583-591
    • /
    • 2020
  • Environmental problems have showen over the past decades due to the rapid development of the world economy and the continued growth of the population. Ocher has been widely used for water treatment research, but few studies have been conducted on adsorption of air pollutants using ocher and porous diatomite earth for indoor air purification. In this study, ocher and diatomite earth were sintered with filters to remove indoor air pollutants. The four types of TMA, H2S, NH3 and CH3COOH were used to study the adsorption efficiency of ocher and porous diatomite filters. With the proper use of ocher, diatomite and copper catalysts, indoor air pollutants could be adsorbed. Alkaline substances (TMA and NH3) and acidic substances (H2S and CH3COOH) were able to adsorb at 120 and 90 minutes, respectively.

규조토 정제 및 탄화규소 분말합성 (A Refining of Natural Diatomite and Synthesis of SiC Powder)

  • 배철훈
    • 한국산학기술학회논문지
    • /
    • 제18권3호
    • /
    • pp.312-319
    • /
    • 2017
  • 국내 부존 청광 규조토의 고부가가치 활용을 위해 물리적인 불순물 정제 및 정제 규조토 중의 SiO2 성분을 규소원으로 한 탄화규소 분말합성에 대해 연구하였다. 청광 규조토를 hammer mill을 이용해서 분쇄한 후 체가름을 통한 입도 분리에 의해서 약 30% 정도의 철분 ($Fe_2O_3$) 정제 효과를 얻을 수 있었으며, 325 mesh 이하 입도 분말의 철분 함량은 약 2% 이었다. 습식 및 건식 자력선별의 경우 모두 철분 함량의 분리 및 정제 효과가 일부 있었지만 회수되는 비자성 부산물 중의 철분 함량이 약 2%로 잔존양이 많음을 알 수 있었다. 청광 원광의 물 침출은 철분 제거에 효과적이었으며, 물 침출 결과 약 40% 정도의 철분이 제거되었다. 또한 정제 규조토 중의 $SiO_2$ 성분을 탄소 (흑연, 카본블랙)로 환원 탄화 반응시켜 ${\beta}$-SiC를 합성하였고, 합성 분말의 산처리를 통한 철분 정제 및 비표면적 변화 등에 대해 연구하였다. 환원제로 흑연보다는 카본블랙을 사용함이 보다 효과적이었고, 산처리공정에 의해 Fe, Ca 등의 불순물들이 거의 제거되었고, 비표면적은 $52.5m^2/g$ 까지 증가하였다.

라돈 저감형 기능성 보드제작을 위한 흡착재의 라돈 저감 성능 (Radon Reduction Performance of Adsorbent for Making Radon-Reducing Functional Board)

  • 김기훈;편수정;김연호;이상수
    • 한국건축시공학회지
    • /
    • 제19권2호
    • /
    • pp.139-147
    • /
    • 2019
  • 본 연구는 최근 방사능 물질의 위험성에 대한 관심이 커지며 원전사고 등의 대규모 인명 피해와 위험지역 선정 등의 이유로 인체의 방사능 안전성에 대한 관심이 커지면서 요구되는 실내 건축용 마감재에 대한 것이다. 일상에서 방사능에 노출되는 여러 가능성 중 실내 공기 중 라돈가스에 대한 관심이 커지면서 라돈가스 흡착형 경화체에 대한 기초연구 자료를 제시한다. 본 연구에 흡착재로 활용된 재료는 규조토와 실리카겔로, 천연 흡착재인 규조토와 인공 흡착재인 실리카겔의 기초 성능 및 흡착 성능을 평가하였다. 향후 실내 공기 중 라돈가스 농도 저감에 대한 정밀한 추가 실험에 대한 연구결과가 필요할 것으로 예상되고, 실험결과에 따른 인공 흡착재인 실리카겔의 라돈가스 흡착 가능성을 기대한다.

경사 기공 구조를 가지는 규조토의 제조에 원심 분리 성형 공정 변수들이 미치는 영향 (The Effect of Processing Conditions on the Gradient Pore Structure of Diatomite by Centrifugal Molding)

  • 하장훈;오은지;;송인혁
    • 한국분말재료학회지
    • /
    • 제19권4호
    • /
    • pp.304-309
    • /
    • 2012
  • The purpose of our study was to develop the fabrication method of porous diatomite ceramics with a porosity gradient by centrifugal molding. The processing variables of centrifugal molding were derived from Stoke's law of sedimentation, which were the radius of the particles, the acceleration due to centrifugal molding and the dynamic viscosity of the slurry. And these could be controlled by ball-milling conditions, centrifugal conditions, and the addition of methyl cellulose, respectively. The effects of processing conditions on the gradient pore structure of diatomite were investigated by particle size analysis, scanning electron microscope, and mercury porosimeter.

규조토와 여과식품 중 크리스토발라이트의 정량분석 (Quantitative Determination of Cristobalite Content in Diatomite and Filtered Food)

  • 정기영
    • 한국광물학회지
    • /
    • 제32권4호
    • /
    • pp.313-321
    • /
    • 2019
  • 규조토는 규조 껍질로 구성된 규질 다공성 퇴적암으로서 여과보조재, 충전재, 흡착재, 연마재 등의 다양한 용도로 사용된다. 규조토의 특성 개선을 위해 열처리하게 되면, 비정질 실리카인 단백석이 크리스토발라이트로 상전이하여 규조토에 함유된다. 해외 규조토 17개 시료에 대하여 X-선회절분석과 주사전자현미경 분석을 실시한 결과, 1개 시료에는 크리스토발라이트가 함유되어 있지 않으나, 나머지 16개 시료에는 크리스토발라이트가 다양한 정도(6~100 %)로 함유되어 있었다. 공기 중 일정 농도 이상의 크리스토발라이트는 인체유해물질로 관리되나, 식품 중 크리스토발라이트의 유해성은 낮은 것으로 알려져 있다. 그러나 식품 품질 관리를 위해서 액상 여과식품 내 크리스토발라이트 함량 측정 필요성이 제기되어, 분석법을 수립하고 몇몇 식품을 대상으로 분석을 실시하였다. 은여과지로 여과한 크리스토발라이트에 X-선회절분석을 실시하고, 강도를 보정하여 검량선을 작성한 결과, 2.7 mg까지 미량 정량이 가능한 것으로 평가되었다. 이 방법으로 몇몇 유통 액상여과식품의 잔류 크리스토발라이트 함량을 측정하였으나 검출되지 않았다.

견운모와 규조토에 대한 암모니아 기체의 흡착특성 (Adsorption characteristics of the sericite and diatomite for ammonia gas)

  • 이수승;김진수;윤창연;이종협
    • 청정기술
    • /
    • 제12권3호
    • /
    • pp.175-181
    • /
    • 2006
  • 실내 공기오염 방지를 위하여 견운모와 규조토를 건축내장재로 사용하기 위한 물리 화학적 특성을 조사 하였다. 특히 규조토의 경우 주사전자현미경(Scanning Electron Microscope: SEM)으로 표면에 분포하는 규조화석의 존재를 확인하였으며, 질소흡탈착법(Brunauer-Emmett-Teller (BET) method)을 통해 5 nm 이하의 기공이 고르게 분포하고 비교적 넓은 비표면적을 가지는 것을 알 수 있었다. 이러한 규조토와 비교하여 견운모는 기공특성이 보이지 않았으며 비표면적 역시 상대적으로 작은 것으로 나타났다. 따라서, 다공질 구조와 넓은 비표면적으로 인해 규조토가 견운모보다 상대적으로 높은 흡착특성을 가지고 있음을 예상 하였으며, 이를 실험적으로 확인 하였다. 하지만 $950^{\circ}C$이상으로 열처리한 결과 규조토는 다공질 규조화석의 연소 및 무기성분의 고온소결로 인해 더 이상 기공 구조를 보이지 않고 비표면적이 감소하였으며, 그 결과 흡착성능 또한 감소하는 경향을 보였다. 결론적으로, 열처리 하지 않은 규조토의 경우 규조화석의 존재로 인해 다공질 구조를 가지며, 넓은 비표면적에 의해 보다 높은 암모니아 흡착특성을 보여 실제로 이와 같은 유해 화합물을 효과적으로 제거할 수 있는 능력이 있음을 보였다.

  • PDF

Silica의 형태가 Pozzolan 반응성에 미치는 영향 (The Effect of the Structural State of Silica on the Pozzolanic Reactivity)

  • 한기성
    • 한국세라믹학회지
    • /
    • 제11권1호
    • /
    • pp.10-18
    • /
    • 1974
  • The hydration at $23^{\circ}C$ between $Ca(OH)_2$ and siliceous materials with various compositions of silica gel and quartz were studied in paste state, and also diatomite was empolyed as another form of silica. The effect of the structural state of silica on the pozzolanic reactivity was investigated by X-ray, DTA, electron microscopy, and chemical analysis. The results obtained were as follows. (1) The molar ratio of $Ca(OH)_2$ to silica gel(C/Sg) being changed in 0.49, 0.81 and 1.22, the free $Ca(OH)_2$ was disappeared within six hours, three days and two weeks respectively and ill-crystallized CSH(I) was formed. However, in the case fo molar ratio of C/Sg=2.45, almost lime was remained uncombinedly after twenty four weeks yet. (2) Though the molar ratio C/Sg of diatomite was 0.71, the hydration was stabilized at three weeks and the result exhibited very peculiar characteristics from silica gel. (3) Pozzolanic reactivity of quartz was negligible, but $\alpha$-cristobalite in diatomite showed appreciable reactivity. (4) The thermal curves showed the exothermic peaks in the range 830 to $930^{\circ}C$ and lower broad peaks at high temperature in the initial steps of hydration, transfered to lower temperature with sharp peaks by proceeding of hydration. (5) The samples containing more silica gel exhibited higher pozzolanic reactivity and martar strength, but the diatomite gave remarkable result for them and they were matched to the strength development rate.

  • PDF