Browse > Article
http://dx.doi.org/10.12989/cac.2017.19.2.161

Corrosion behavior of concrete produced with diatomite and zeolite exposed to chlorides  

Gerengi, Husnu (Corrosion Research Laboratory, Department of Mechanical Engineering, Faculty of Engineering, Duzce University)
Kocak, Yilmaz (Department of Construction, Kutahya Vocational College of Technical Sciences, Dumlupinar University)
Jazdzewska, Agata (Corrosion and Materials Engineering, Gdansk University of Technology)
Kurtay, Mine (Corrosion Research Laboratory, Department of Mechanical Engineering, Faculty of Engineering, Duzce University)
Publication Information
Computers and Concrete / v.19, no.2, 2017 , pp. 161-169 More about this Journal
Abstract
Chloride induced reinforcement corrosion is widely accepted to be the most frequent mechanism causing premature degradation of reinforced concrete structures. The electrochemical impedance of reinforcing steel in diatomite- and zeolite-containing concrete exposed to sodium chloride was assessed. Chemical, physical and mineralogical properties of three concrete samples (20% diatomite, 20% zeolite, and a reference containing neither) were correlated with corrosion investigations. The steel-reinforced samples were exposed to 3.5% NaCl solution for 500 days, and measured every 15 days via EIS method. Results indicated that porosity and capillary spaces increase the diffusion rate of water and electrolytes throughout the concrete, making it more susceptible to cracking. Reinforcement in the reference concrete was the most corroded compare to the zeolite and the diatomite samples.
Keywords
concrete; corrosion; diatomite; zeolite; EIS; chlorides;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Brousseau, R., Gu, P., Xie, P. and Beaudoin, J.J. (1992), "AC impedance spectroscopy (I): A new equivalent circuit model for hydrated portland cement paste", Cement Concrete Res., 22(5), 833-840.   DOI
2 Crane, A.P. and Arup, H. (1983), Corrosion of Reinforcement in Concrete Construction, Ellis Horwood Limited, London, U.K.
3 Durgun, H., Gerengi, H. and Kurtay, M. (2015), "The effect of zeolite and diatomite on the corrosion of reinforcement steel in 1M HCl solution", Results Phys., 5, 148-153.   DOI
4 Durgun, H., Gerengi, H., Kocak, Y., Jazdzewska, A. and Kurtay, M. (2013), "Electrochemical investigations on the corrosion behaviour of reinforcing steel in diatomite-and zeolitecontaining concrete exposed to sulphuric acid", Constr. Build. Mater., 49, 471-477.   DOI
5 EN 12350-2 (2009), Testing Fresh Concrete-Part 2: Slump Test, Ankara, Turkey.
6 EN 12390-3 (2009), Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens, Ankara, Turkey.
7 Erdogan, T.Y. (2010), Concrete, METU Press Publishing Company, Ankara, Turkey.
8 Faukner, L.R. and Bard, A.J. (1980), Electrochemical Methods, John Wiley and Sons, New York, U.S.A.
9 Ferreira, M., Montemo, M. and Simoes, A. (2003), "Chlorideinduced corrosion on reinforcing steel: From the fundamentals to the monitoring techniques", Cement Concrete Compos., 25(4), 491-502.   DOI
10 Ferreira, M.G., Montemo, M.F. and Simoe, A.M. (2003), "Chloride-induced corrosion on reinforcing steel: From the fundamentals to the monitoring techniques", Cement Concrete Compos., 25(4), 491-502.   DOI
11 Jennings, H., Scuderi, C. and Mason, T. (1991), "Impedance spectroscopy of hydrating cement pastes", J. Mater. Sci., 26(2), 349-353.   DOI
12 Kadri, E.H. and Siddique, R. (2011), "Effect of metakaolin and foundry sand on the near surface characteristics of concrete", Constr. Build. Mater., 25(8), 3257-3266.   DOI
13 Kelestemur, O. (2012), "Utilization of waste vehicle tires in concrete and its effect on the corrosion behavior of reinforcing steels", J. Miner. Metallurg. Mater., 17(3), 363-370.
14 Kelestemur, O. and Demirel, B. (2010), "Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume", Constr. Build. Mater., 24(10), 1898-1905.   DOI
15 Lu, X. (1997), "Application of the nernst-einstein equation to concrete", Cement Concrete Res., 27(2), 293-302.   DOI
16 Manson, T., Ford, S. and Shane, J. (1998), "Assignment of features in impedance spectra of the cement-paste/steel system", Cement Concrete Res., 28(12), 1737-1751.   DOI
17 Moropoulou, A., Karagiannis, N., Karoglou, M. and Bakolas, A. (2016), Building Materials Capillary Rise Coefficient: Concepts, Determination and Parameters Involved, New Approaches to Building Pathology and Durability, Springer Singapore, Singapore, 27-44.
18 Page, C.L. and Khalaf, M.N. (1979), "Steel/mortar interfaces: Microstructural features and mode of failure", Cement Concrete Res., 9(2), 197-208.   DOI
19 Palaniswamy, N., Vedalakshm, R., Saraswathy, V. and Song, H.W. (2009), "Determination of diffusion coefficient of chloride in concrete using warburg diffusion coefficient", Corros. Sci., 51(6), 1299-1307.   DOI
20 Perez, M.C., Diaz, B. and Novoa, X.R. (2006), "Study of the chloride diffusion in mortar: A new method of determining diffusion coefficients based on impedance measurements", Cement Concrete Compos., 28(3), 237-245.   DOI
21 Polder, R., Bertolini, L., Elsener, B. and Pedeferri, P. (2004), Corrosion of Steel in Concrete-Prevention, Diagnosis and Repair, 1st Edition, Wiley-VCH, Weinheim, Germany.
22 TS EN 12390-3 (2003), Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens, Ankara, Turkey.
23 Raharinaivo, A., Dhouibi-Hachani, L. and Grandet, J. (1996), "Comparing the steel-concrete interface state and its electrochemical impedance", Cement Concrete Res., 26(2), 253-266.   DOI
24 Savas, M. and Kocak, Y. (2016), "Effect of the PC, diatomite and zeolite on the performance of concrete composites", Comput. Concrete, 17(6), 815-829.   DOI
25 Topcu, I.B., Bilir, T. and Uygunoglu, T. (2009), "Effect of waste marble dust content as filler on properties of self-compacting concrete", Constr. Build. Mater., 23(5), 1947-1953.   DOI
26 Treadway, K.W.J. and Page, C.L. (1982), "Aspects of the electrochemistry of steel in concrete", Nature, 297, 109-115.   DOI
27 TS 802 (2009), Design of Concrete Mixes, Ankara, Turkey.
28 Tutti, K. (1982), "Corrosion of steel in concrete", Swed. Cement Concrete Res., 1-159.
29 American National Standards ANSI/ASTM C876 (2008), Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete.
30 Abrantes, J.C. and Ribeiro, D.V. (2016), "Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: A new approach", Constr. Build. Mater., 111, 98-104.   DOI
31 Bamforth, P.B., Leek, D.S, Poole, A.B. and Treadway, K.W. (1990), Proceedings of the 3rd International Symposium on Corrosion of Reinforcement in Concrete, Elsevier Applied Science, London, U.K.
32 Bamforth, P.B., Schiessl, P., Raupach, M. and Treadway, K.W. (1990), Proceedings of the 3rd International Symposium on Corrosion of Reinforcement in Concrete, Elsevier Applied Science, London, U.K.
33 Beaudoin, J.J. and Liu, Z. (1999), "An assessment of the relative permeability of cement systems using AC impedance techniques", Cement Concrete Res., 29(7), 1085-1090.   DOI
34 Beaudoin, J.J., Xie, P., Gu, P. and Xu, Z. (1993), "A rationalized AC impedance model for micro structural characterization of hydrating cement systems", Cement Concrete Res., 23(2), 359-367.   DOI
35 Beaudoin, J.J. and Ramachandra, V.S. (1995), "Study of early hydration of high alumina cement containing phosphoric acid by impedance spectroscopy", J. Mater. Sci. Lett., 14(7), 503-505.   DOI
36 Brousseau, R. and McCarter, W.J. (1990), "The AC response of hardened cement paste", Cement Concrete Res., 20(6), 891-900.   DOI