• 한국진공학회지
• /
• 제9권4호
• /
• pp.328-334
• /
• 2000

ECR-PECVD 방법을 이용하여 ECR power, $CH_4/H_2$ 가스 혼합비와 유량, 증착시간을 고정시켜놓고 기판 bias 전압을 변화 시켜가면서 DLC 박막을 제작하였고, 제작된 박막의 두께, Raman과 FTIR 스펙트럼 그리고 미소경도 등을 측정 및 분석하여 기판 bias전압에 따른 이온충돌이 박막의 특성 변화에 미치는 영향을 조사하였다. FTIR 분석 결과로부터 기판 bias 전압을 증가시킬수록 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들의 탈수소화 현상을 확인할 수 있었고, 박막의 두께는 bias 전압을 증가시킬수록 감소되었다. 그리고 Raman 스펙트럼으로부터 Gaussian curve fitting을 통하여 $sp^3$/$sp^2$의 결합수에 비례하는 D와 G peak의 면적 강도비(ID/IG)는 기판 bias 전압을 증가시킬수록 증가하였고, 또한 경도도 증가하였다. 이 결과로부터 본 연구에서 제작된 수소를 함유한 비정질 탄소 박막은 기판 bias 전압의 크기를 증가시킬수록 DLC 특성이 더 향상됨을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.545-545
• /
• 2008

Poly-Si is an essential material for floating gate in NAND Flash memory. To fabricate this material within region of floating gate, chemical mechanical polishing (CMP) is commonly used process for manufacturing NAND flash memory. We use colloidal silica abrasive with alkaline agent, polymeric additive and organic surfactant to obtain high Poly-Si to SiO2 film selectivity and reduce surface defect in Poly-Si CMP. We already studied about the effects of alkaline agent and polymeric additive. But the effect of organic surfactant in Poly-Si CMP is not clearly defined. So we will examine the function of organic surfactant in Poly-Si CMP with concentration separation test. We expect that surface roughness will be improved with the addition of organic surfactant as the case of wafering CMP. Poly-Si wafer are deposited by low pressure chemical vapor deposition (LPCVD) and oxide film are prepared by the method of plasma-enhanced tetra ethyl ortho silicate (PETEOS). The polishing test will be performed by a Strasbaugh 6EC polisher with an IC1000/Suba IV stacked pad and the pad will be conditioned by ex situ diamond disk. And the thickness difference of wafer between before and after polishing test will be measured by Ellipsometer and Nanospec. The roughness of Poly-Si film will be analyzed by atomic force microscope.

• 대한전자공학회논문지
• /
• 제27권11호
• /
• pp.69-76
• /
• 1990

자기 응력 계수의 변화에 따른 자기 버블의 등방성 전파 여부를 규명하기 위하여 자기 응력 계수가 거의 등방화(${\lambda}111{\simeq}{\lambda}100$) 된 세가지 버블 가네박막(AK92, AKa8, AKb1)의 바이어스 마진과 버블 소멸 자장을 $2.5{\mu}m$ 주기를 갖는 다이아몬드 패턴에서 측정하였다. 측정 결과 바이어스 마진은 각 박막의 경우 우수, 보통, 열등 회로에서 상당히 등방화된 값을 얻을 수 있었다. 버블 소멸 자장으로부터 회전 자장의 방향에 따른 버블 포텐셜 우물을 구하였다. 버블 포텐셜 우물로부터 자기 응력 이방성 정도를 나타내는 ${\Delta}(=({\lambda}111-{\lambda}100)/{\lambda}111)$값이 0.5인 AK92인 경우 우수, 보통, 열등 회로에서 버블 포텐셜 우물이 상당한 차이가 있는 반면 0.3인 AKa8과 0.1인 AKb1의 경우 각 회로에서 거의 등방화가 이루어진 것을 볼 수 있었다. 위의 두가지 측정 결과에서 ${\Delta}$값이 0.1~0.3일때 거의 등방적인 버블 전파가 일어남을 알 수 있었다.

• 한국표면공학회지
• /
• 제54권2호
• /
• pp.53-61
• /
• 2021

The properties of tetrahedral amorphous Carbon (ta-C) film can be determined by multiple parameters and comprehensive effects of those parameters during a deposition process with filtered cathodic vacuum arc (FCVA). In this study, Taguchi method was adopted to design the optimized FCVA deposition process of ta-C for improving deposition efficiency and mechanical properties of the deposited ta-C thin film. The influence and contribution of variables, such as arc current, substrate bias voltage, frequency, and duty cycle, on the properties of ta-C were investigated in terms of deposition efficiency and mechanical properties. It was revealed that the deposition rate was linearly increased following the increasing arc current (around 10 nm/min @ 60 A and 17 nm/min @ 100A). The hardness and I_D/I_G showed a correlation with substrate bias voltage (over 30 GPa @ 50 V and under 30 GPa @ 250 V). The scratch tests were conducted to specify the effect of each parameter on the resistance to plastic deformation of films. The analysis on variances showed that the arc current and substrate bias voltage were the most effective controlling parameters influencing properties of ta-C films. The optimized parameters were extracted for the target applications in various industrial fields.

• 한국결정성장학회지
• /
• 제23권6호
• /
• pp.291-295
• /
• 2013

산화 및 수소 분위기 열처리를 통한 화학적 표면 개질로 나노다이아몬드 seed 입자의 응집성 완화 및 초미세나노결정질 다이아몬드 (UNCD) 박막 증착을 위한 핵형성 밀도 향상을 확보하였다. 열처리에 의해 나노다이아몬드 seed 입자표면 작용기가 개질되었고, 제타 전위도 증가하였다. 또한, 응집체 평균 크기가 약 $2{\mu}m$에서 ~55 nm로 크게 감소하였다. $600^{\circ}C$, 수소 열처리된 seed 입자로 seeding 한 Si 기판으로부터 열처리하지 않은 seed 입자에 비해 현저하게 향상된 ${\sim}2.7{\times}10^{11}cm^{-2}$의 매우 높은 핵형성 밀도를 확보하였다.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.279-283
• /
• 2015

Ni (100 nm thick) was deposited onto synthesized diamonds to fabricate etched diamonds. Next, those diamonds were annealed at varying temperatures ($400{\sim}1200^{\circ}C$) for 30 minutes and then immersed in 30 wt% $HNO_3$ to remove the Ni layers. The etched properties of the diamonds were examined with FE-SEM, micro-Raman, and VSM. The FE-SEM results showed that the Ni agglomerated at a low annealing temperature (${\sim}400^{\circ}C$), and self-aligned hemisphere dots formed at an annealing temperature of $800^{\circ}C$. Those dots became smaller with a bimodal distribution as the annealing temperature increased. After stripping the Ni layers, etch pits and trigons formed with annealing temperatures above $400^{\circ}C$ on the surface of the diamonds. However, surface graphite layers existed above $1000^{\circ}C$. The B-H loop results showed that the coercivity of the samples increased to 320 Oe (from 37 Oe) when the annealing temperature increased to $600^{\circ}C$ and then, decreased to 150 Oe with elevated annealing temperatures. This result indicates that the coercivity was affected by magnetic domain pinning at temperatures below $600^{\circ}C$ and single domain behavior at elevated temperatures above $800^{\circ}C$ consistent with the microstructure results. Thus, the results of this study show that the surface of diamonds can be etched.

• 한국위성정보통신학회논문지
• /
• 제6권1호
• /
• pp.28-31
• /
• 2011

본 논문에서는 d33 모드로 구동하여 우수한 성능을 가지는 RF-MEMS 스위치의 구현을 위한 희생층과 구조층의 조합으로서 DLC와 포토레지스트를 제안하였다. 포토레지스트의 경화현상을 방지하기 위하여 DLC 구조층은 상온에서 RF-PECVD 방법을 이용하여 증착하였다. 그리고 PZT 압전층은 RF 마그네트론 스퍼터링 방법을 이용하여 상온에서 구조층 위에 증착하였으며, 희생층의 제거 후 결정화를 위하여 급속 열처리 (RTA) 장비를 이용하여 후 열처리하였다. PZT의 결정화 과정과 DLC의 기계적 성질의 변화를 다양한 온도조건에 따라 분석한 결과 DLC는 PZT의 결정화 온도까지 영률과 강도면에서 우수한 특성을 나타냄을 확인하였다. 또한 포토레지스트를 사용함으로서 공정을 단순화하고 낮은 비용으로 제작이 가능하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.46-50
• /
• 2007

We have studied the nematic liquid crystal (NLC) alignment effects on a nitrogen-doped diamond-like carbon (NDLC) thin film layer with ion beam irradiation. The pretilt angle for NLC on the NDLC surface with ion beam exposure was observed below 1 degree. Also, we had the good LC alignment characteristics on the NDLC thin films with ion beam exposure of 1800 eV. In thermal stability experiments, the alignment defect of the NLC on the NDLC surface with ion beam irradiation above annealing temperature of $250^{\circ}C$ can be observed. Therefore, the good thermal stability and LC alignment for NLC by ion beam aligned NDLC thin films can be achieved.

• 복식문화연구
• /
• 제13권5호
• /
• pp.763-776
• /
• 2005

The purpose of this study is to analyze the glamour image in contemporary women's fashion since 1990. The method of study is to analyze the documentary and fashion magazines about the glamour images. Most of all, glamour has been composed by connection of hollywood film industry and fashion. Glamourous body image showed sensual, threatening and vague body. Formative characteristics in fashion showed a tight silhouette, neglige, lace look, dress showing neck and shoulder, fur coat, stiletto, diamond, gold, big and thick jewelry, satin, velvet, lace, mink and fox fur, etc. Internal meaning was a fantasy, ideal, wealth, fame, hyper-feminity, vagueness, vulgarity, sexuality, mystery, professional, fatalness, aggressiveness and evil. Since 1990, the glamour images in fashion were as follows; First, the glamour with hyper-feminity showed a classical femme-fatal image as fearful existence with a power more than allure. Second, the glamour with vulgarity showed an exaggerated, cheap and popular kitsch image, which have intense colors, lavish surfaces and excessive sexual signs. Third, the glamour with classical sensuality showed a hi-glamour image of hollywood actresses being active from 1930 to 1950, which was expressed glittery dress, stole, diamond, fur wrap, hill, luxury dress. Fourth, the glamour with sexual perversion showed an erotic, vague and sexual drag image, and fetish costume. Fetishistic elements were rubber, PVC, stiletto, thick and high boots and corset and particularly, they were a main method of expression of glamour image. Fifth, the glamour with future image showed a mechanical and mysterious image and it was a conscious style by metallic, plastic and sleeky fabric. In conclusion, glamour fashion image is an ideal beauty type of women and will exist as a meaningful aesthetic sign in women's fashion.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.217.2-217.2
• /
• 2014

We prepared a flexible and transparent CuO/Cu/CuO multilayer electrodes on a polyethylene terephthalate (PET) substrate using a specially designed roll-to-roll sputtering system at room temperature for GFF-type touch screen panels (TSPs). By the continuous roll-to-roll sputtering of the CuO and Cu layer, we fabricated a flexible CuO(150nm)/Cu(150nm)/CuO(150nm) multilayer electrodes with a sheet resistance of $0.289{\Omega}/square$, resistivity of $5.991{\times}10^{-23}{\Omega}-cm$, at the optimized condition without breaking the vacuum. To investigate the feasibility of the CuO/Cu/CuO multilayer as a transparent electrode for GFF-type TSPs, we fabricated simple GFF-type TSPs using the diamond patterned CuO/Cu/CuO electrode on PET substrate as function of mesh line width. Using diamond patterned CuO/Cu/CuO electrode of mesh line $5{\mu}m$ with sheet resistance of 38 Ohm/square, optical transmittance of 90% at 550 nm and an average transmittance of 89% at wavelength range from 380 to 780 nm, we successfully demonstrated GFF-type touch panel screens (TPSs). The successful operation of GFF-type TPSs with CuO/Cu/CuO multilayer electrodes indicates that the CuO/Cu/CuO multilayer is a promising transparent electrode for large-area capacitive-type TPSs due to its low sheet resistance and high transparency.