• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제16회 학술발표회 논문개요집
• /
• pp.177-177
• /
• 1998

• 한국진공학회지
• /
• 제14권3호
• /
• pp.165-170
• /
• 2005

의료용 임플랜트의 혈액적합성 개선을 위하여 박막코팅에 대한 관심이 증대하고 있다. 특히 diamond-like carbon(DLC)과 titanium nitride(TiN) 박막은 우수한 화학, 물리적 성질은 물론 생체적합 특성까지 갖추고 있다. 따라서 이들 박막의 혈액 적합성과 물리적 특성과의 관개를 연구하기 위하여 박막표면의 모폴로지 및 젖음성과 fibrinogen흡착 특성을 비교 분석하였다. 혈액응고 원인이 되는 fibrinogen의 흡착량은 DLC보다 TiN의 경우가 적어, 보다 우수한 특성을 보였으며, 이것은 TiN박막 표면의 높은 친수성으로 인한 것으로 판단된다. 박막표면의 fibrinogen 흡착을 줄이기 위해 플라즈마 처리 및 노(爐) 열처리를 각각 수행하였다. 산소 플라즈마 및 열처리를 하였을 경우 DLC 박막은 큰 효과가 없는 반면 TiN 박막의 경우 fibrinogen 흡착량이 크게 줄어 보다 개선된 결과를 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1700-1702
• /
• 2004

Diamond films including nanocrystallites are grown by microwave plasma chemical vapor deposition using $O_2$ additives and negative substrate bias at growth step. Effects of growth parameters on film properties are characterized by Raman spectra, SEM, and AFM images. It is found that the surface roughness and the microstructure of grown films can be controlled by changing $O_2$ gas ratio. The I-V characteristics are also investigated in terms of growth conditions of diamond films. The surface roughness and the $sp^2$ phase of the grown diamond films turn out to be crucial factors for reducing leakage currents at diamond/metal interfaces.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권3호
• /
• pp.270-276
• /
• 1996

As methane concentration was varied, the textures of diamond films deposited on Si(100)substrate were observed by XRD,SEM and Raman spectroscope. As a result, $O_{2}$ plasma etching has been useful to observe microscopic structure of diamond films by SEM. The cross section of diamond films deposited on Si(100)substrate with 4% concentration of methane to hydrogen was a polycrystal like a pillar. The diamond crystal like a pillar has been oriented to (110)surface and the high quality diamond film with FWHM of Raman spectra being 3.8 $cm^{-1}$ / has been grown. As time goes by deposition time, the preferred orientation increases

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.786-788
• /
• 1998

Synthetic diamond films were deposited on pretreated silicon substrate in activated gas phase using RF plasma-assisted CVD. We investigated the influence of $O_2$ gas on facets of diamond crystal. In $H_2-CH_4-O_2$ gas mixture, the increase of oxygen concentration lead to well-faceted diamond particles and increasing crystallinity of diamond films. The deposited diamond films were analyzed by SEM, XRD, Raman spectroscopy.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.155-158
• /
• 1997

Highly oriented diamond films were deposited on a (100) silicon substrate by bias enhanced nucleation technique. Both plan-view and cross-section TEM were applied to study the nucleation and growth mechanism of diamond grains. Randomly oriented polycrystalline diamond grains with internal microtwins were observed at the nucleation stage while defect free regions were retained at the growth stage and were apparently related with the epitaxy of diamond films. From our experimental results, the nucleation and texture formation mechanism of diamond films is discussed.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.809-814
• /
• 1998

In this study, the metastable state diamond thin films have been deposited on Si substrates from methand-hydrogen and oxygen mixture usin gMicrowave Plasma Enhanced Chemical Vapor Deposition (MWPCVD) method. effects experimental parameters MWPCVD including methan concentrations, oxygen additions, operating pressure, deposition time on the growth rate and crystallinity were investigated. diamond thin film was synthesized under the following conditions: methane concentration of 0.5%(0.5sccm)∼5%(5sccm). oxygen concentration of 0∼80%(2.4sccm). operating pressure of 30Torr∼ 70Torr, deposition time of 1∼32hr. SEM, WRD, and Raman spectroscopy were employed to analyse the growth rate and morphology, crystallinity and prefered growth direction, and relative amounts of diamond and non=diamond phases respectively.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.175-176
• /
• 2002

Our study is to search for tribological properties of diamond-like carbon (DLC) films as known as anti- wear hard thin film on various polymers. This report deals with the deposition of DLC films on various polymer substrates in vacuum by magnetron radio frequency (RF) sputtering method with using argon plasma and graphite, titanium target. The properties of friction and wear are measured using a ball-on-disk wear -testing machine. The properties of friction and wear have been remarkably improved by DLC coating. Moreover the composition of DLC films has been analyzed by using auger electron spectroscopy(AES). The wear rate of titanium-containing DLC film is lower than that of no-metal-containing DLC film.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.118-120
• /
• 2002

Electro-optical (EO) characteristics of the ion beam (IB) aligned twisted nematic (TN)-liquid crystal display (LCD) with oblique ion beam exposure on the diamond-like carbon (DLC) thin film surface were studied. An excellent voltage-transmittance (V-T) curve of the ion beam aligned IN-LCD was observed with oblique ion beam exposure on the DLC thin film surface for I min. Also, a faster response time for the ion beam aligned TN-LCD with oblique ion beam exposure on the DLC thin film surface for 1 min can be achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.273-275
• /
• 1997

We fabricated the conventional silicon tips coated with a diamond-like carbon (DLC) film. The DLC films are prepared by the filtered cathodic vacuum arc (FCVA) technique. With increasing nitrogen content in DLC film, the work function($\phi$) and the turn-on voltage decrease and the emission current increases. This phenomenon is due to the fact that the Fermi-level moves to the conduction band by increasing nitrogen doping concentration. We have tested on the stability of the DLC film coated silicon tip during 2 hours at 500V.