• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.95-96
• /
• 2002

The operation of proceeding bearing in the conditions of misaligned axis of proceeding and bush leads to the load concentration on the bearing edges causing further mixed lubrication conditions, unstable operation and intensive wear of mating parts. For the design process of proceeding bearing the knowledge of static characteristics determined from the oil film pressure and temperature distribution is very important. For the 3-lobe proceeding bearing, the pressure, temperature and viscosity fields, load capacity, minimum oil film thickness, power loss, oil flow and maximum oil film temperature have been determined by iterative solution of the Reynolds', energy and viscosity equations. The paper introduces the results of theoretical investigations of static characteristics of 3-lobe proceeding bearing operating at misaligned axis of proceeding and bush. An effect of misalignment ratio, length to diameter ratio of the proceeding bearing, the lobe clearance ratio on the static characteristics was investigated. Laminar, adiabatic model of oil film for the solution of Reynolds, energy and viscosity equations was applied.

• 한국전기전자재료학회논문지
• /
• 제14권9호
• /
• pp.751-756
• /
• 2001

Carbon nanotubes(CNTs) was successfully grown on Ni coated silicon wafer substrate by PECVD technique(Plasma Enhanced Chemical Vapor Deposition). As a catalyst, Ni thin film of thickness ranging from 15∼30nm was prepared by electron beam evaporator system. In order to find the find the optimum growth condition, initially two different types of gas mixtures such as C$_2$H$_2$-NH$_3$ and C$_2$H$_2$-NH$_3$-Ar were systematically investigated by adjusting the gas mixing ratio in temperature of 600$^{\circ}C$ under 0.4 torr. The diameter of the grown CNTs was 40∼200nm. The diameter of the CNTs increases with increasing the Ni particles size. TEM images clearly demonstrated synthesized nanotubes to be multiwalled.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.297-300
• /
• 2006

One of main issues of the FRP-concrete composite member is shear connection between FRP and concrete in order to secure composite behavior of FRP and concrete. To solve this problem, perfobond rib FRP shear connector is introduced for the mechanical shear connection. In this study, experimental study was carried out on the perfobond rib FRP shear connectors in order to develop the effective details of perfobond rib FRP shear connectors. Pull-out test specimens were manufactured with FRP plate with holes embedded in concrete block. Main parameters considered in this study were diameter of holes, ratio of spacing between the centres of holes to the diameter of holes, and thickness of FRP plates. Test results are discussed according to above parameters compared with other empirical expressions for steel perfobond rib connector.

• Advances in materials Research
• /
• 제8권1호
• /
• pp.1-10
• /
• 2019

Roll bonding (RB) process of bi-metal laminates as a new noble method of bonding has been widely used in the production of bimetal laminates. In the present study, asymmetric roll bonding process as a new noble method has been presented to produce Al/Cu bimetallic laminates with the thickness reduction ratios 10%, 20% and 30% together with mismatch rolling diameter ($\frac{R_2}{R_1}$) ratio 1:1, 1:1.1 and 1:1.2. ABAQUS as a finite element simulation software was used to model the deformation of samples. The main attention in this study focuses on the bonding properties of Al/Cu samples. The effect of the $\frac{R_2}{R_1}$ ratios was investigated to improve the bond strength. During the simulation, for samples produced with $\frac{R_2}{R_1}=1:1.2$, the vertical plastic strain of samples was reach the maximum value with a high quality bond. Moreover, the peeling surface of samples after the peeling test was investigated by the scanning electron microscopy (SEM).

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.281-287
• /
• 2011

얇은 관 탄성좌굴 공식의 불확실성을 고려하기 위해, 공식을 구성하는 파라미터인 튜브재료의 탄성계수, 푸아송 비, 튜브 두께 및 지름의 불확실성을 분석하였다. 본 연구는 원자로에서 연소되는 핵연료봉과 같이 사용 중 함몰을 엄격히 방지하고 있는 얇은 관의 설계신뢰도를 향상시키는 데에 중요하다. 분석 방법은 각각의 파라미터가 변화할 수 있는 범위를 충분히 포함할 수 있는 최소의 탄성좌굴 안전율을 구하고 이를 선형적으로 합하여 최종의 최소안전율을 구하였다. 최소 안전율에 가장 큰 영향을 미치는 파라미터는 관의 두께로 나타났다. 두께가 얇을수록 더 큰 최소안전율이 필요하며 예로 적용한 지르코늄 합금관의 경우, 두께가 0.254 와 0.87 mm 일 때 최소안전율은 각각 1.547 과 3.487 로 나타났다.

• 한국강구조학회 논문집
• /
• 제13권2호
• /
• pp.191-200
• /
• 2001

본 연구에서는 수치해석을 통하여 축하중을 받는 원통형 쉘의 좌굴해석을 수행하였다. 해석 식과의 비교를 통하여 수치모델 방법, 적절한 요소의 종류 및 요소의 개수등을 제시하였다. 매개변수 해석결과, 직경/두께비가 증가하면 좌굴응력은 크게 감소하나 높이/직경비가 증가하면 그 변화는 미세하며 이는 일반적인 기둥의 좌굴해석 결과와 상이하다. 높이/직경비가 커질수록 원주방향 좌굴모드의 파장수가 감소하였다. 바닥판의 두께가 증가하면 좌굴응력은 1~2% 증가한다. 따라서 그 영향은 거의 무시할 수 있다. 초기 형상결함의 크기가 증가하면 좌굴응력은 큰 감소를 보인다. 또한 회기분석을 통하여 좌굴응력을 간편하게 구할 수 있는 설계식을 도출하였으며, 수치해석 결과와 잘 일치하였다.

• 한국강구조학회 논문집
• /
• 제15권5호통권66호
• /
• pp.561-570
• /
• 2003

본 논문은 스테인리스강관과 일반구조용강관의 비교를 통한 스테인리스 강관의 건축구조용 강재로서 적용성 검토를 위해, 폭(지름)-두께비, 단면형상을 주요 변수로 한 소재의 인장강도실험과 단주의 압축강도실험을 실시하여 소재의 기계적 성질과 단주의 강도 및 거동을 파악한다. 실험결과, 스테인리스강관은일반구조용 강관에 비해 인장내력, 항복비, 연신율, 에너지흡수능력 등이 월등히 우수한 것으로 나타났다. 항복내력 또한 KS규격 항복강도 $2.1tf/cm^2$ 나 일본 스테인리스설계기준강도 $2.4tf/cm^2$ 을 충분히 만족한 값으로 일반구조용 강판보다 더 높은 값을 보였다. 스테인리스 각형강관은 일반구조용 각형강관에 비해 폭-두께비의 제한값을 초과하는 경우에도 국부좌굴에 의한 급격한 내력저하 없이 연성적인 거동을 보이나 소성가공에 의한 영향은 폭-두께비가 증가하면서 더 많이 받는 것으로 나타났으며, 스테인리스 원형강관은 일반구조용 원형강관보다 지름-두께비가 증가함에 따라 국부좌굴과 소성가공의 영향을 더 적게 받는 것으로 나타났다. 소성변형능력 또한 일반구조용 강관에 비해 스테인리스 강관이 우수하게 나타났다.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1384-1390
• /
• 2004

The full containment Liquefied Natural Gas(LNG) storage tank is based on a double liquid container concept : two separate containers, one within the other, are capable of containing the LNG. The outer concrete tank provides comer protection(secondary containment) to withstand and safely contain any spill from the inner tank. The comer protection is installed on inside corner surface of outer concrete tank. Because of high and complex stresses, corner protection is designed by ASME section ⅧI Div. 2, Appendix 4 on behalf of API 620 which is main design code for LNG tank. Design guidelines to determine design factors such as liner thickness and knuckle radius are not well understood because Appendix 4 is the design method not based on equation but FEM. Recently, the volume of LNG tank shows a tendency to increase. So it is necessary to set up the design guidelines to cope with change of LNG tank capacity and height/diameter ratio. In this paper, optimum design of corner protection was performed and the design guidelines were suggested by the results of FEM for LNG tanks which have different capacities and height/diameter ratio.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.329-334
• /
• 2009

형상에 따른 오리피스의 동특성을 확인하기에 앞서 정상 상태에서의 성능에 대한 연구가 선행되어야 한다. 이를 위해 수치해석을 통해 개도, 두께, 팽창각에 따른 오리피스의 성능을 예측하였다. 유동 해석 알고리듬은 SIMPLEC을 사용하였고, 차분 기법은 PRESTO, QUICK 기법을 사용하였으며, 난류 모델은 $k-{\omega}$ STS를 사용하였다. 오리피스의 개도가 증가하면서 유량계수는 급격하게 증가하였고, 두께가 증가하면서 유량계수는 급격하게 증가하였다가 서서히 감소한다. 팽창각이 45도일 때 유량계수가 가장 작게 나타났다.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.545-556
• /
• 2017

The tubed steel reinforced concrete (SRC) column is a composite column in which the outer steel tube is mainly used to provide confinement on the core concrete. This paper presents experimental and analytical studies on the behavior of circular tubed SRC (TSRC) columns subjected to axial compression. Eight circular TSRC columns were tested to investigate the effects of length-to-diameter ratio (L/D) of the specimens, diameter-to-thickness ratio (D/t) of the steel tubes, and use of stud shear connectors on the steel sections. Elastic-plastic analysis on the steel tubes was used to investigate the mechanism of confinement on the core concrete. The test results indicated that the tube confinement increased the strength and deformation capacity for both short and slender columns, and the effects on strength were more pronounced for short columns. A nonlinear finite element (FE) model was developed using ABAQUS, in which the nonlinear material behavior and initial geometric imperfection were included. Good agreement was achieved between the predicted results using the FE model and the test results. The test and FE results were compared with the predicted strengths calculated by Eurocode 4 and the AISC Standard. Based on the analytical results, a new design method for this composite column was proposed.