• 청정기술
• /
• 제16권3호
• /
• pp.213-219
• /
• 2010

볼텍스튜브는 고압의 가스를 이용하여 고온 가스와 저온 가스를 분리하거나 입자상 물질의 분리에 사용할 수 있는 장치이다. 이러한 볼텍스튜브의 에너지분리 특성과 물질분리 특성을 활용하여, 연소가스로부터 $CO_2$를 흡수하는 장치의 핵심부품으로 적용할 수 있다. 본 연구에서는 $CO_2$ 흡수용 볼텍스튜브의 기본설계 자료를 구축하기 위하여 에너지분리 성능실험을 수행하였다. 설계를 위한 기초 자료를 확보하기 위하여, 볼텍스 발생기의 오리피스 직경, 노즐면적비 및 튜브의 길이가 에너지분리 특성에 미치는 영향력을 실험을 통하여 분석하였다. 결과적으로 오리피스 직경이 볼텍스튜브의 성능에 지배적인 설계인자임을 확인하였으며, 노즐면적비와 튜브길이의 영향력은 미미하였다. 오리피스 직경이 작고(Dc=0.6D), 노즐면적비가 중간 이상(AR=0.14~0.16)이며, 튜브 길이가 긴 모델(L=16D)이 저온 출구 측과 고온 출구 측의 열전달에서 가장 우수한 성능을 나타내었다. 본 연구의 결과는 $CO_2$흡수용 $100Nm^3$/hr급 볼텍스튜브의 기본설계 자료로 활용될 예정이다. 볼텍스튜브를 적용한 $CO_2$흡수 공정을 적용하면 기존의 대형 흡수탑 대비 상당한 공간과 에너지의 절감 효과가 기대된다.

• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.163-170
• /
• 2008

Purpose: Biphasic calcium phosphates have been of great interest recently. Mixing adequate ratios of hydroxyapatite(HA) and beta-tricalcium phosphate($\beta$-TCP) allowed to control the resorption rate without distorting its osteoconductive property. This study evaluated the bone formation effect of newly developed biphasic calcium phosphate(BCP) in calvarial defect of rabbits. Materials and Methods: 6 male New Zealand rabbits were used. Four defects with 8mm in diameter were created on each animal. BCP with HA/$\beta$-TCP ratio of 7:3 and particle size of $0.5{\sim}1.0\;mm$ was used as the test group and bovine bone with $0.25{\sim}1.0\;mm$ particle size, as the control group. Both test and control group materials were randomly implanted in the calvarial defects and were covered witha polymer membrane. The animals were sacrificed after 12, 24, and 48 weeks of implantation under general euthanasia. Resin blocks were obtained and were stained by masson's trichrome for histological observation. Results: Overall results were uneventful without any defect exposure or inflammation. The amount of new bone formation and bone maturity increased with increase in healing period at both groups. New bone in test group was mostly formed along the material particle surrounded by osteoblasts, and observation of osteoblastic stream was also present. Bone maturity increased as it was closer to thedefect margins. Under the same healing period, the test group showed more bone formation than the control group with more stable bovine bone particles remaining even after 48 weeks, whereas considerable resorption took place in BCP. Almost total defect closure was observed in test group with new bone formation in the central part of the defect. However, limited new bone formation was observed in the control group. Conclusion: Within the limits of the study, the present study reveals the newly developed BCP to be a good osteoconductive material. However, further studies are needed to be conducted in a different study model with a larger sample size.

• 한국수소및신에너지학회논문집
• /
• 제22권3호
• /
• pp.386-401
• /
• 2011

Mathematical models for various steps in coal gasification reactions were developed and applied to investigate the effects of operation parameters on dynamic behavior of gasification process. Chemical reactions considered in these models were pyrolysis, volatile combustion, water shift reaction, steam-methane reformation, and char gasification. Kinetics of heterogeneous reactions between char and gaseous agents was based on Random pore model. Momentum balance and Stokes' law were used to estimate the residence time of solid particles (char) in an up-flow reactor. The effects of operation parameters on syngas composition, reaction temperature, carbon conversion were verified. Parameters considered here for this purpose were $O_2$-to-coal mass ratio, pressure of reactor, composition of coal, diameter of char particle. On the basis of these parametric studies some quantitative parameter-response relationships were established from both dynamic and steady-state point of view. Without depending on steady state approximation, the present model can describe both transient and long-time limit behavior of the gasification system and accordingly serve as a proto-type dynamic simulator of coal gasification process. Incorporation of heat transfer through heterogenous boundaries, slag formation and steam generation is under progress and additional refinement of mathematical models to reflect the actual design of commercial gasifiers will be made in the near futureK.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.557-562
• /
• 2018

본 연구에서는 편백 오일을 함유한 고분자 알지네이트(HMWSA)/저분자 알지네이트(LMWSA)의 각 조성비를 달리하여 알지네이트 함량에 따라 비드를 제조하였으며 고분자알지네이트/저분자알지네이트 함량에 따른 알지네이트 비드의 직경과 모폴로지 및 방출특성을 관찰하였다. 고분자 알지네이트(HMWSA)와 저분자 알지네이트(LMWSA)비드 제조 시 교반속도와 농도의 변화에 따른 지름변화 및 표면 특성 등을 광학현미경으로 이용하여 확인하였다. 또한 피톤치드/알지네이트 비드에서 편백 오일 방출 거동에 대해서는 UV/Vis. spectrometer를 사용하여 그 특성을 조사하였다. 본 실험에서 제조된 피톤치드/알지네이트 비드의 평균 입자 크기는 교반 속도가 증가하면서 그 크기가 작아짐을 알 수 있었고, 가교제 역할을 하는 $CaCl_2$ 용액의 농도가 증가할수록 비드의 크기가 작아짐을 확인 할 수 있었다. 피톤치드/알지네이트 비드의 표면 모폴로지 확인 결과에서 저분자 알지네이트의 함량이 증가할수록 부드러운 표면이 거칠게 변화하는 것을 확인 할 수 있었다. 이러한 결과들은 피톤치드/알지네이트 비드 표면에서 친수성그룹들이 증가했으며, 또한 피톤치드/알지네이트에서 피톤치드 오일 방출속도가 증가되었기 때문이다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.86-88
• /
• 2006

The novel linear- (V-LUM) and cross-type macromonomers (C-VUM) of vinyl-terminated bifunctional polyurethane were synthesized and applied to the dispersion polymerization of styrene and MMA in ethanol. The existence of the vinyl terminal groups and the grafted macromonomer with styrene and PMMA was verified using 1H NMR and 13C NMR. Monodisperse polystyrene (PS) microspheres were successfully obtained above 15 wt % of macromonomer relative to styrene. The macromonomer can efficiently stabilize higher surface area of the particles compared to a conventional stabilizer, PVP. The grafting ratio of the PS calculated from 1H NMR linearly increased up to 0.048 with 20 wt % of the macromonomer and the high molecular weights (501,300 g/mol) of PS with increased glass transition and enhanced thermal stability were obtained. Furthermore, the stable and monodisperse PMMA microspheres having a weight-average diameter of $5.09{\mu}m$ and a good uniformity of 1.01 were obtained with 20 wt% L-VUM. The molecular weight increased, but the size of the PMMA particles decreased with the macromonomer concentration due to the increased stabilizing effect. The molecular weight of the PMMA was approximately two fold higher than that by a conventional PVP. The L-VUM acts as a reactive stabilizer, which gives polyurethane-grafted PS or PMMA with a high molecular weight. In addition, the XPS result showed that the C-PS (PS using the C-VUM) was anchored with a larger amount of PEG than that of the L-PS (PS using the L-VUM) on the particle surface. Thus, the reaction and stabilizing mechanism of the macromonomers for the formation of PS particles is proposed.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2671-2676
• /
• 2011

Nanocrystalline $TiO_2$ spherical particle (NP) with a dimension of 5 ${\times}$ 5.5 nm and several nanorods (NR) with different aspect ratios (diameter ${\times}$ length: 5 ${\times}$ 8.5, 4 ${\times}$ 15, 4 ${\times}$ 18 and 3.5 ${\times}$ 22 nm) were selectively synthesized by a solvothermal process combined with non-hydrolytic sol-gel reaction. With varying the molar ratio of TTIP to oleic acid from 1:1 to 1:16, the NRs in the pure anatase phase were elongated to the c-axis direction. The prepared NP and NRs were applied for the formation of nanoporous $TiO_2$ layers in dye-sensitized solar cell (DSSC). Among them, NR2 ($TiO_2$ nanorod with 4 ${\times}$ 15 nm) exhibited the highest cell performance: Its photovoltaic conversion efficiency (${\eta}$) of 6.07%, with $J_{sc}$ of 13.473 mA/$cm^2$, $V_{oc}$ of 0.640 V, and FF of 70.32%, was 1.44 times that of NP with a size of 5 ${\times}$ 5.5 nm. It was observed from the transient photoelectron spectroscopy and the incident photon to current conversion efficiency (IPCE) spectra that the $TiO_2$ films derived from NR2 demonstrate the longest electron diffusion length ($L_e$) and the highest external quantum efficiency (EQE).

• 공업화학
• /
• 제29권5호
• /
• pp.571-580
• /
• 2018

본 연구에서는 수용액에서 Pb(II)를 흡착 제거하기 위하여 커피찌꺼기(spent coffee grounds; SCG)와 점토광물인 견운모(sericite)를 혼합하여 복합흡착제(SS)를 제조하였다. FT-IR 분석결과 SS의 주요 관능기는 O-H, C=O와 C-N 그룹이었다. SS의 비표면적, 기공직경 그리고 양이온 치환 용량은 SCG와 sericite보다 크고, 높았다. SS 흡착제 제조를 위한 최적의 조건은 소성온도 $300^{\circ}C$, SCG : sericite 비율 8 : 2, 입자의 크기는 0.3 mm이었다. SS 흡착제를 이용하여 Pb(II)를 제거하기 위한 실험에서는 Langmuir 흡착식이 Freundlich보다 적합하였으며, Langmuir 등온흡착식에 의한 Pb(II)의 최대 흡착용량은 44.42 mg/g이었다. 또한, 열역학 분석에 의하면 SS 흡착제를 이용한 Pb(II)의 흡착 공정은 물리적인 흡착이었으며, 자연적인 발열반응이었다. SS 흡착제의 흡착-탈착 실험에서는 88-92%를 회수할 수 있었으나, 탈착 횟수가 증가할수록 SS 흡착제의 활성사이트는 감소하였다. 위의 실험결과 SS 흡착제는 전처리 없이 저렴하고, 효율적으로 Pb(II)를 수용액에서 흡착 제거할 수 있다.

• Journal of Forest and Environmental Science
• /
• 제15권1호
• /
• pp.89-97
• /
• 1999

산지계류에 서식하는 수서곤충의 종류와 서식조건에 대한 기초자료를 얻기 위해 강원대학교 산림과학대학 부속연습림내의 봉명천을 대상으로 수서곤충, 음이온 및 하상재료를 파악한 결과는 다음과 같다. 1. 각 지점별 수서곤충의 종다양도, 종풍부도 및 균등도는 사방댐의 상류역이 하류역보다 높게 나타났다. 2. 음이온은 A, B, C, D 및 E 지점 모두 유사하였지만 하류역인 F지점에서는 상류역에 비해 최소 1.5배에서 최대 89배 이상의 이온이 검출되었다. 3. 하상재료는 상류역이 하류역보다 입경이 크게 나타났으나, 사방댐 직하부는 사방댐에 의해 하류역보다 자갈의 구성도가 높게 나타났다. 4. 수서곤충의 수는 음이온 농도에 반비례하였고, 하상재료의 크기와는 정비례하였으며, 특히 호박돌의 분포도에 크게 영향을 받은 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.640-649
• /
• 2010

Coarse granular materials such as gravel and crushed stone have been used as an important fill materials to large soil structure of railway, road, dam and so on. Although much studies for general soil materials have been carried out domestically, the studies for coarse materials were insufficient. Particularly, it is the level in which the study for dynamic properties(Elastic modulus and damping ratio) of coarse materials, applies the foreign country literature. This is due to the lack of large equipment for element test. But large soil structures made of coarse granular materials are generally important infrastructures. Therefore, the reliable design parameters for coarse materials should be obtained for safe and economic design, construction and maintenance. Triaxial test is the laboratory test method that is capable of controlling a confining pressure and boundary condition. In this project, we made a multi-purpose large triaxial testing system. This testing system is able to test coarse granular materials with maximum particle diameter of 100mm and support both the load control and displacement control. The load cell is installed inside of triaxial cell and the axial displacement is measured locally in order to control and measure more accurately in the small strain level. The verification test of this testing system was carried out with urethane verification specimens. So, from now on the useful information for coarse granular materials are expected to suggested by performing many tests with various material and condition.

• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.23-30
• /
• 2015

The properties of dust collected from electric arc furnace of ferro manganese production units was investigated, and also the metallic manganese was recovered from the dust by aluminothermy process. The ferromanganese dust collected from electric arc furnace contained about 15% of manganese oxide ($Mn_3O_4$) and 9% of carbon as the contaminant, and have a 5um of 50% median diameter and irregular particle shape. The carbon contaminant in the dust could be reduced until about 0.1~0.5% level by roasting in the air at a temperature of 600~900C for 60minutes. The recovery of manganese could not be carried out using only ferromanganese dust from electric arc furnace by aluminothermy process, but the ferromanganese which contained manganese of about 92% and iron of about 5% could be obtained from the mixture of ferromanganese dusts from electric arc furnace and converter. The best mixing condition of dust fixed at electric arc furnace dust / converter dust ratio of 1:9 and 2:8, and the mixing rato of 3:7 or more could not separated the metal and slag from the reactant after aluminothermy reaction.