• Title/Summary/Keyword: Diameter distribution

Search Result 1,852, Processing Time 0.033 seconds

TiO2 Nanotubular Formation on Grade II Pure Titanium by Short Anodization Processing (Grade II 순수 타이타늄의 단시간 양극산화에 의한 TiO2 나노튜브 형성)

  • Lee, Kwangmin;Kim, Yongjae;Kang, Kyungho;Yoon, Duhyeon;Rho, Sanghyun;Kang, Seokil;Yoo, Daeheung;Lim, Hyunpil;Yun, Kwiduk;Park, Sangwon;Kim, Hyun Seung
    • Korean Journal of Materials Research
    • /
    • v.23 no.4
    • /
    • pp.240-245
    • /
    • 2013
  • Electrochemical surface treatment is commonly used to form a thin, rough, and porous oxidation layer on the surface of titanium. The purpose of this study was to investigate the formation of nanotubular titanium oxide arrays during short anodization processing. The specimen used in this study was 99.9% pure cp-Ti (ASTM Grade II) in the form of a disc with diameter of 15 mm and a thickness of 1 mm. A DC power supplier was used with the anodizing apparatus, and the titanium specimen and the platinum plate ($3mm{\times}4mm{\times}0.1mm$) were connected to an anode and cathode, respectively. The progressive formation of $TiO_2$ nanotubes was observed with FE-SEM (Field Emission Scanning Electron Microscopy). Highly ordered $TiO_2$ nanotubes were formed at a potential of 20 V in a solution of 1M $H_3PO_4$ + 1.5 wt.% HF for 10 minutes, corresponding with steady state processing. The diameters and the closed ends of $TiO_2$ nanotubes measured at a value of 50 cumulative percent were 100 nm and 120 nm, respectively. The $TiO_2$ nanotubes had lengths of 500 nm. As the anodization processing reached 10 minutes, the frequency distribution for the diameters and the closed ends of the $TiO_2$ nanotubes was gradually reduced. Short anodization processing for $TiO_2$ nanotubes of within 10 minutes was established.

Breeding of King Oyster Mushroom, Pleurotus eryngii with a High Yield and Earliness of Harvest Trait and Its Sensory Test (큰느타리(새송이)버섯 다수확 속성 품종 육종 및 관능평가)

  • Im, Chak Han;Kim, Min-Keun;Kim, Kyung-Hee;Kim, Sun Young;Lee, Seong Tae;Heo, Jae Young;Kwon, Jin-Hyeuk;Kim, Dong Sung;Ryu, Jae-San
    • The Korean Journal of Mycology
    • /
    • v.41 no.2
    • /
    • pp.91-96
    • /
    • 2013
  • Two strains Pleurotus eryngii 'Aeryni' and 'Na' carrying superior traits of a pileus and a earliness of harvest were selected to improve previously bred strains by single crosses. New hybrid, Aeryni 3 (Aeryni10 ${\times}$ Na5) showed superiority to other hybrids in yield, fruit body shape and days for harvest. The new strain, Aeryni 3 was harvested earlier than Keunneutari No. 2 by 2~3 days, and yielded 110.5 g/bottle (850 mL) which was 108% of that of Keunneutari No. 2. The ratio of diameter of pileus and stipe was 1.8 indicating that new stain will be likely low damage rate of fruit body during a distribution, and that was better than 2.1 of Keunneutari No. 2. A sensory test of taste of the new strain showed that 84.7% of evaluation panels selected "very good" while that of Keunneutari No. 2 was 55.5%. In purchasing intent test, 86.9% of panels will buy the new stain whereas 46.8% will buy Keunneutari No. 2 implicating that the new strain will likely be more marketability than previously bred strain.

A Study on Flexibility Acquisition Method for VLCC Shaft System (VLCC 축계 시스템의 유연성 확보 방안에 관한 연구)

  • Shin, Sang-Hoon;Ko, Dae-Eun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.12
    • /
    • pp.135-139
    • /
    • 2017
  • The main reason for heat accidents occurring at the after stern tube bearing (STB) is excessive local pressure caused by the deflection of the propulsion shaft due to propeller loads. The probability of a heat accident is increased by the low flexibility of the shaft system in very large crude oil carriers (VLCCs) as the engine power and shaft diameter increase and the distance decreases between the forward and after STBs. This study proposed shaft system with only an after STB and no forward STB for a flexibility acquisition method for a VLCC shaft system under hull deformation. A Hertzian contact condition was applied, which assumes a half-elliptical pressure distribution along the contact width for the calculation of the local squeeze pressure. The propeller loads, heat effect, and hull deflection under engine operating conditions are also considered. The results show that the required design criteria were satisfied by building a partial slope at the white metal, which is the material at the axial contact side in the after STB. This system could reduce building cost by simplification of the shaft system.

The Variation of Germination, Growth and Leaf Form of Open-Pollinated Progenies of Cornus kousa Buerger ex Miquel in Korea (산딸나무(Cornus kousa) 풍매차대(風媒次代)의 발아(發芽), 생장(生長)및 엽형(葉型) 변이(變異))

  • Song, Jeong-Ho;Goo, Young-Bon;Han, Sim-Hee;Yang, Byeung-Hoon;Park, Hyung-Soon
    • Journal of Korean Society of Forest Science
    • /
    • v.95 no.3
    • /
    • pp.261-267
    • /
    • 2006
  • A nursery trial comprising 109 progenies of 5 populations of Cornus kousa was analysed using multivariate analysis of 12 quantitative traits (growth and leaf form). The aim of this study was to examine geographic variation of the species based on the single, existing nursery trial to support a genetic resource conservation plan of Cornus kousa in Korea. Nested Anova showed that there were statistically significant differences among populations as well as among families within populations in all 12 quantitative traits. In 10 of 12 traits, variance components among families within populations were higher than those among populations. Cluster analysis using complete linkage method showed three groups to Euclidean distance 0.8. Among principal components, primary 2 principal components appeared to be major variables because of the loading contribution of 91.9%. The first contribution component was maximum width, vein number, blade length/petiole length and upper 1/3 width lower 1/3 width; the second one was height, diameter at root collar, blade length, upper 1/3 width, petiole length and petiole length/vein number, respectively. But all characters showed no significant difference with the pattern of geographic distribution.

A Study on the Area of Reinforcement in the Cross Tunnel by Laboratory Model Test (실내모형실험을 통한 교차터널의 보강영역에 관한 연구)

  • Jung, Hyuk Sang;Hong, Jong Ouk;Baeg, Seung In;Chun, Byung Sik
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.32 no.4C
    • /
    • pp.129-137
    • /
    • 2012
  • With the increase in infrastructure needs and tunnel construction, more complicated geometries have come to light, especially in cross tunnel design and construction. The major factors to influence existing tunnels are spacing between tunnels, relative position, size of the new tunnel, construction techniques, topographic and geologic conditions, structure, and alternative construction. In this study, settlement from an excavation for a new tunnel near an existing tunnel, settlement from a change in position of the new tunnel relative to an existing tunnel, and the distribution of deformations of the existing tunnel as a result of excavating the cross-location are analyzed through laboratory model tests. As the results, in condition of the new tunnels go through below the existing tunnel, not only analysed through the standard of the diameter of the tunnel, so it would need to set up to strengthen the field within each side of the 1D, but also determined the part of the cross in the existing and the new tunnel, should implement the reinforcement from the part of new tunnel to the existing tunneling influence of excavation.

A Study on the Electrochemical Properties of LiNi0.8Co0.2-xMxO2[M=Al] Cathode Materials Prepared by Sol-Gel Method (졸-겔법에 의해 제조된 정극 활물질 LiNi0.8Co0.2-xMxO2[M=Al]의 전기화학적 특성)

  • Han, Chang-Joo;Cho, Won-Il;Cho, Byung-Won;Yun, Kyung-Suk;Jang, Ho
    • Journal of the Korean Electrochemical Society
    • /
    • v.6 no.4
    • /
    • pp.266-270
    • /
    • 2003
  • The $LiN_{0.8}Co_{0.2}O_2$ has shown outstanding electrochemical properties. The microstructure of $LiN_{0.8}Co_{0.2}O_2$ cathode was investigated by using TEM (transmission electron microscopy) and X-ray diffraction techniques. The $LiN_{0.8}Co_{0.2}O_2$ was produced by sol-gel method to synthesize fine particles less than $1{\mu}m$ in the average diameter. In this study, emphasis was given to the examination and interpretation of the microstructural change during charge-discharge cycling experiments, which appeared to be one of the main causes of early degradation of rechargeable batteries. Results showed that the $1{\mu}m$ cathode produced by sol-gel method had high reversible capacity and excellent cycling stability due to its homogeneous distribution of Ni and Co cations on u atomic scale. In particular, the $1{\mu}m$ cathode did not show severe strain induced structural defects or cubic spinel disordering during cycling experiments, which had been observed in the conventional $LiCoO_2$ cathode. The $LiNi_{0.8}Co_{0.2-x}M_x[M=Al]$ compounds show good reversibility but low discharge capacity.

Influence of Surfactants on Enhancing Transport of Bacteria in Geological Materials (지질매질체내에서 계면활성제가 박테리아 이동 증진에 미치는 영향)

  • Choi, Nag-Choul;Park, Seong-Jik;Kim, Song-Bae;Kim, Dong-Ju;Lee, Seong-Jae
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.32 no.11
    • /
    • pp.1017-1023
    • /
    • 2010
  • This study investigated the effect of surfactants (nonionic surfactant (Tween 20), biosurfactant) on enhancing transport of bacteria (Bacillus subtilis ATCC 6633) in geological materials. Column experiments were performed under various surfactant conditions with columns packed with quartz sand (particle size distribution: 0.5~2.0 mm, mean diameter: 1.0 mm). Bacterial mass recovery, sticking efficiency, and other parameters were quantified from breakthrough curves. Results indicate that bacterial attachment to sand surfaces increased considerably in the presence of mineral salt medium (MSM), especially at the inlet, which was due to the increase of ionic strength by MSM. It was observed that bacterial transport in sand columns was enhanced in the presence of surfactant. Results also show that simultaneous injection of both surfactant and MSM or pre-injection of surfactant was more effective in bacterial transport enhancement than after-injection of surfactant. This study suggests that transport of bacteria in geological materials could be influenced by surfactants and their injection methods.

Studies on the Effects of Variables on the Fabrication Of C/SiC Composite by Chemical Vapor Infiltration in a Fluidized Bed Reactor (유동층반응기에서 화학증기침투에 의한 C/SiC의 복합체 제조시 변수의 영향 연구)

  • Lee, Sung-Joo;Kim, Yung-Jun;Kim, Mi-Hyun;Rim, Byung-O;Chung, Gui-Yung
    • Applied Chemistry for Engineering
    • /
    • v.10 no.6
    • /
    • pp.843-847
    • /
    • 1999
  • In this research, C/SiC composites, i.e. activated carbon coated with SiC obtained from dichlorodimethylsilane(DDS) and hydrogen, have been made by chemical vapor infiltration(CVI) in a fluidized bed reactor. Activated carbons of sizes of 4~12, 12~20, and 20~40 mesh were used. After deposition the surface area, the amount and the shape of deposit of each sample were observed at different concentrations of reactant DDS, sizes of activated carbon, reaction pressures and reaction times. The experimental results showed that uniform deposition in the pores of sample was obtained at a lower concentration of DDS and a lower pressure. Additionally, from the observation that the pore diameter and the surface area have minimum values at a certain time of deposition, it was known that deposition occurred inside of the pore at first and then on the outside of particle. Small particles of SiC were deposited uniformly on the surface of activated carbon at lower DDS concentrations and lower reaction pressures. The results were confirmed by SEM, TGA, the pore size distribution analyzer and BET.

  • PDF

Clinical Observation on Thyroid Carcinoma (갑상선암(甲狀腺癌)의 임상적(臨床的) 관찰(觀察))

  • Park, Seon-Yang;Shin, Yong-Tae;Cho, Bo-Yun;Kim, Byung-Kuk;Koh, Chang-Soon;Lee, Mun-Ho
    • The Korean Journal of Nuclear Medicine
    • /
    • v.12 no.2
    • /
    • pp.33-40
    • /
    • 1978
  • Clinical features of 147 patients with biopsy-proven thyroid carcinomas were investigated from January, 1972 to April, 1978 at the Seoul National University Hospital with the following results. 1) The incidence of thyroid carcinomas according to their histopathological classification revealed 76.2% of papillary carcinoma, 19.0% of follicular carcinoma, and 3 cases of occult sclerozing carcinoma, 1 case of giant cell carcinoma and 1 case of metastatic melanoma. 2) The ratio of male to femle patients was 1:8.3 and showed no difference between papillary and follicular carcinomas. 3) The age distribution showed the peak incidence in the fourth decade (29.3%) followed by the fifth and sixth decades. 4) The average duration of illness from the onset of symptoms was about 5 years while it was 4.4 years and 7.6 years in the papillary and follicular carcinomas respectively. 5) The diameter of the thyroid masses was smaller than 5 cm in 53.6% of the patients, from 5 cm to 10 cm in 40.0% and larger than 10 cm in 6.4%. 6) In 36.4% of the patients with thyroid carcinomas the thyroid masses were fixed to adjacent tissues. 7) Metastasis to the regional lymph nodes was noted in 40.0% of the total cases, and in 45.2% and 17.6% of the papillary and follicular carcinomas respectively, while the lung and bone metastases were found in 10.0% and 4.4% in each type respectively. 8) 88.9% of the patients showed cold areas in the thyroid scans using $^{131}I$. 9) Typical psammoma bodies were observed in 21.3% of the cases in the microscopic examination of the pathological specimens. 10) The initial diagnosis of thyroid malignancy could be made before histological confirmation in 64.5% of the patients. 11) The clinical staging slightly modified from Schulz method revealed 43.6% of the patients in stage I, 26.4% in stage II, 20.9% in stags III and 9.1 % in stage IV. 12) The association with Hashimoto's thyroiditis was noted in 4 cases, with nodular goiter in 3 cases, and with follicular adenoma in 1 case.

  • PDF

Comparison of Lung Ventilation Scan Using Technegas and $^{99m}Tc-DTPA$ Aerosol (Technegas 환기스캔과 $^{99m}Tc-DTPA$ Aerosol 스캔의 비교)

  • Choi, Yoon-Ho;Kim, Sang-Eun;Lee, Dong-Soo;Chung, June-Key;Lee, Myung-Chul;Kim, Keun-Youl;Koh, Chang-Soon;Koong, Sung-Soo
    • The Korean Journal of Nuclear Medicine
    • /
    • v.24 no.2
    • /
    • pp.237-243
    • /
    • 1990
  • Pulmonary embolism demands rapid and accurate diagnosis. And ventilation imaging has greatly improved the diagnostic accuracy of pulmonary embolism in addition to perfusion imaging. Agents currently used include xenon-133, krypton-81m and technetium-99m radioaerosols. However radioactive gases are compromised by availability and cost for krypton-81m, radiation dose, gamma energy and non?physiologic behaviour for xenon-133. Radioaerosols of technetium-99m componds are rapidly cleared from the lung after inhalation, and their relative low effeciency (specific radioactivity) and wide distribution of particle sizes make them also suboptimum. A new ventilation agent, Technegas is a suspension of structured graphite ellipsoids with diameter below 20nm, labelled with $^{99m}Tc$ in a carrier gas of Argon. This report describes the authors' clinical experience with Technegas. This is the first reported clinical study of this agent in Korea. A comparison of Technegas and $^{99m}Tc-DTPA$ aerosol was performed in 12 patients with various pulmonary diseases such as COPD, pulmonary tuberculosis and pleural effusion. All patients were studied with $^{99m}Tc-DTPA$ aerosol inhalation and Technegas ventilation. In both studies image quality was assessed (1) semiquantitatively by scoring bronchial and gastric activity, (2) subjectively by direct visual comparison of peripheral lung images and (3) quantitatively by computing the peripheral penetration index(PI) for each lungs. The bronchial activites were seen in 7 out of 12 cases with $^{99m}Tc-DTPA$ aerosol and in 5/12 with Technegas. The gastric activities were seen in 5/12 and 1/12 cases respectively. The average values of PI were 61.26% with $^{99m}Tc-DTPA$ aerosol and 69.20% with Technegas (p>0.05). Using $^{99m}Tc-DTPA$ aerosol, COPD patients showed deposition in the central airways with poor visualization of the peripheral areas of the lungs. In Technegas studies these phenomena were less prominent, and the examination is well tolerated by pateients and requires only a minimum of patient cooperation. With superiority of easy availability and handling, better physical characteristics and favorable Image quality, Technegas is a Promising agent for lung ventilation scanning.

  • PDF