• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.553-566
• /
• 2009

In-phase control and energy-optimized control are the two major control strategies proposed for series power quality controllers (SPQC). However quantitative analysis and comparison between these two control strategies is quite limited in previous publications. In this paper, an extensive quantitative analysis is carried out on these two control strategies through phasor diagram approach, and a detailed quantitative comparison is conducted accordingly. The load current is used as the reference phasor, and this leads to a simpler and clearer phasor diagram for the quantitative relationship. Subsequently detailed analysis of SPQC using in-phase control and energy-optimized control are provided respectively, under different modes both for under voltage/voltage sag and for over voltage/voltage swell. The closed form analytic expressions and the curves describing SPQC compensation characteristics are obtained. The detailed system power flow is figured out for each mode, and the detailed quantitative comparison between the two control strategies is then carried out. The comparison covers several aspects of SPQC, such as required compensating voltage magnitude, required capacity of energy storage component, and maximal ride-through time. In the end, computer simulation and prototype experimental results are shown to verify the validity of all the analysis and the result of the comparison.

• 한국정보통신학회논문지
• /
• 제16권6호
• /
• pp.1291-1299
• /
• 2012

UML은 풍부한 문법이 제공되어 다양한 표현이 가능하지만, 사용자가 작성한 다이어그램의 일관성을 보장하지는 못한다. 따라서, 본 논문에서는 UML다이어그램 사이의 일관성을 개선할 수 있는 상호점검규칙을 제안하며, 특히 UML 동적 다이어그램과 정적다이어그램의 일관성에 중점을 둔다. UML 다이어그램의 구성요소와 상호관계를 보다 명확하게 상호점검규칙에 반영하기 위하여 메타모델을 이용하고, 규칙의 정확한 표현을 위하여 UML 표준 제약언어인 OCL을 사용한다. 상호점검규칙은 UML 명세의 well- formedness -rule과 비교하여 일관성에 중점을 두어 유도하였으며, 정적 다이어그램과 동적 다이어그램의 메타모델을 유도하고 다이어그램 사이의 관계성분석 과정을 거친다. 마지막으로 사례 다이어그램에 제안된 점검규칙을 적용하여 그 유용성을 검증한다.

• 한국실내디자인학회논문집
• /
• 제15권1호
• /
• pp.20-29
• /
• 2006

The concept of a 'place' in contemporary cities has been fundamentally challenged by the social, economical changes as well as the global digital network. The complex and multi-layered contemporary everyday life blur the boundaries of the existing architectural programs. In contemporary architecture, various proposals have attempted to overcome the physical limitations. 'Activity Diagram' is one of them. Activity diagram is a diagrammatized design process In which the given program is analyzed into individual activities, then it is re-organized and finally spatialized based on the analysis. In many projects by Manuel Gausa, Ben Van Berkel and Vicente Guallart, the activity diagram is applied in various forms and they are explained with theoretical backgrounds. Based on how the given program is re-organized into assembly of activities and how diagram is applied, five analytical elements were selected to critically analyze three chosen architects' case projects. In this study, it is found that architects attempt to construct an open networked world where diverse activities are freely interconnected in spite of some fundamental limitations of activity diagrams.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.108-115
• /
• 2009

In metal forming technologies, the stamping process is one of the significant manufacturing processes to produce sheet metal components. It is important to design stamping process which can produce sound products without defect such as fracture and wrinkle. The objective of this study is to propose the feasible formability diagram which denotes the safe region without fracture and wrinkle for effective design of stamping process. To determine the feasible formability diagram, FE-analyses were firstly performed for the combinations of process parameters and then the characteristic values for fracture and wrinkle were estimated from the results of FE-analyses based on forming limit diagram. The characteristic values were extended through training of the artificial neural network. The feasible formability diagram was finally determined for various combinations of process parameters. The stamping process of turret suspension to support suspension module was taken as an example to verify the effectiveness of feasible formability diagram. The results of FE-analyses for process conditions within fracture and wrinkle as well as safe regions were in good agreement with experimental ones.

• 한국융합학회논문지
• /
• 제13권3호
• /
• pp.1-9
• /
• 2022

UML(Unified Modeling Language) 클래스 다이어그램은 시스템의 정적인 측면을 표현하며 분석 및 설계부터 문서화, 테스팅까지 사용된다. 클래스 다이어그램을 이용한 모델링이 소프트웨어 개발에 있어 필수적이지만, 경험이 많지 않은 모델러에게 쉽지 않은 작업이다. 도메인 카테고리별로 분류된 클래스 다이어그램 데이터 세트가 제공된다면, 모델링 작업의 생산성을 높일 수 있을 것이다. 본 논문은 클래스 다이어그램 이미지 데이터를 구축하기 위한 자동 분류 기술을 제공한다. 추가 정보 없이 단지 UML 클래스 다이어그램 이미지를 식별하고 도메인 카테고리에 따라 자동 분류한다. 먼저, 웹상에서 수집된 이미지들이 UML 클래스 다이어그램 이미지인지 여부를 판단한다. 그리고, 식별된 클래스 다이어그램 이미지에서 클래스 이름을 추출하여 도메인 카테고리에 따라 분류한다. 제안된 분류 모델은 정밀도, 재현율, F1점수, 정확도에서 각각 100.00%, 95.59%, 97.74%, 97.77%를 달성했으며, 카테고리별 분류에 대한 정확도는 81.1%와 95.2% 사이에 분포한다. 해당 실험에 사용된 클래스 다이어그램 이미지 개수가 충분히 크지 않지만, 도출된 실험 결과는 제안된 자동 분류 방식이 고려할 만한 가치가 있음을 나타낸다.

• Structural Engineering and Mechanics
• /
• 제50권1호
• /
• pp.19-36
• /
• 2014

This paper focuses on a model order reduction (MOR) for large-scale rotordynamic systems by using finite element discretization. Typical rotor-bearing systems consist of a rotor, built-on parts, and a support system. These systems require careful consideration in their dynamic analysis modeling because they include unsymmetrical stiffness, localized nonproportional damping, and frequency-dependent gyroscopic effects. Because of this complex geometry, the finite element model under consideration may have a very large number of degrees of freedom. Thus, the repeated dynamic analyses used to investigate the critical speeds, stability, and unbalanced response are computationally very expensive to complete within a practical design cycle. In this study, we demonstrate that a Krylov subspace-based MOR via moment matching significantly speeds up the rotordynamic analyses needed to check the whirling frequencies and critical speeds of large rotor systems. This approach is very efficient, because it is possible to repeat the dynamic simulation with the help of a reduced system by changing the operating rotational speed, which can be preserved as a parameter in the process of model reduction. Two examples of rotordynamic systems show that the suggested MOR provides a significant reduction in computational cost for a Campbell diagram analysis, while maintaining accuracy comparable to that of the original systems.

• 한국산업융합학회 논문집
• /
• 제9권2호
• /
• pp.117-122
• /
• 2006

This paper is to provide some of the analysis procedures of the FAD(Failure Assessment Diagram), which is applied th the safety test of the atomic pressure vessels and other structures. Harrison proposed R-6 Diagram, and Bloom developed the method of DPFAD(Deformation Plasticty Failure Assessment Diagram). Analysis of J-integration of the plastic materials give the failure test curve for the materials with serious work hardening effect. J value was obtained form both FEM(Finite Element Mothod) and the experiment using compact type specimen for J=JIC, and the results were compared. In this study, the results of analysis using DPFAD and the factors affecting DPFAD in Static fatigue and fracture were reviewed. It was shown that the concept of DPFAD can be applied to test the safety of the structures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.353-359
• /
• 1999

Purpose : A new method of lateral cephalometric analysis for midface, focusing on zygomatic bone, was created in this study, and measured in Korean adults. The purposes of this study are understanding about new approach for midfacial depression, especially zygomatic bone, and using to make adequate diagnosis and treatment plan. Materials and methods : In this study, esthetic Korean adults, 25 males and 25 females who were between $0^{\circ}$ and $4^{\circ}$ in ${\angle}ANB$, and between 62% and 70% in P/A facial height ratio, and had normal overbite and overjet, were used. Orbitale(Or) and Soft tissue orbitale(Or') were used for indicators of anteroposterior position of zygomatic area. And, mean value and standard deviation of linear and angular measurements, and ratio about each linear measurements, were obtained. then, standard deviation diagram - wiggle diagram - was made for visualization of results. Results : Mean values, standard deviations and ranges of 19 measurements were obtained, and among them, 5 linear measurements that had large standard deviation were excluded and the others were used for making standard deviation diagram. In standard deviation diagram, the following results were obtained. 1. If the measurements are located on more left side of mean-value-vertical -line, the potential of midfacial hypoplasia are stronger, especially zygomatic area. 2. If the measurements are located on more right side of mean-value-vertical-line, the potential of midfacial hypoplasia are decreased. Conclusion : This study presented a new method of lateral cephalometric analysis focusing on zygomatic bone in Korean adults. We expect that the results of this study can be used as parameter when clinicians make decisions about diagnosis and treatment plan for rehabilitation of esthetics and function. But, it is necessary to prove its usefulness, and to further evaluate the results.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 1999년도 춘계공동학술대회: 지식경영과 지식공학
• /
• pp.281-287
• /
• 1999

Decision class analysis (DCA) is viewed as a classification problem where a set of input data (situation-specific knowledge) and output data (a topological leveled influence diagram (ID)) is given. Situation-specific knowledge is usually given from a decision maker (DM) with the help of domain expert(s). But it is not easy for the DM to know the situation-specific knowledge of decision problem exactly. This paper presents a methodology fur sensitivity analysis of DCA under incomplete information. The purpose of sensitivity analysis in DCA is to identify the effects of incomplete situation-specific frames whose uncertainty affects the importance of each variable in the resulting model. For such a purpose, our suggested methodology consists of two procedures: generative procedure and adaptive procedure. An interactive procedure is also suggested based the sensitivity analysis to build a well-formed ID. These procedures are formally explained and illustrated with a raw material purchasing problem.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 1999년도 춘계공동학술대회-지식경영과 지식공학
• /
• pp.281-287
• /
• 1999

Decision class analysis (DCA) is viewed as a classification problem where a set of input data (situation-specific knowledge) and output data(a topological leveled influence diagram (ID)) is given. Situation-specific knowledge is usually given from a decision maker (DM) with the help of domain expert(s). But it is not easy for the DM to know the situation-specific knowledge of decision problem exactly. This paper presents a methodology for sensitivity analysis of DCA under incomplete information. The purpose of sensitivity analysis in DCA is to identify the effects of incomplete situation-specific frames whose uncertainty affects the importance of each variable in the resulting model. For such a purpose, our suggested methodology consists of two procedures: generative procedure and adaptive procedure. An interactive procedure is also suggested based the sensitivity analysis to build a well-formed ID. These procedures are formally explained and illustrated with a raw material purchasing problem.