• 유공압시스템학회논문집
• /
• 제8권3호
• /
• pp.1-7
• /
• 2011

As the technologies of electronic device have advanced these days, most of mechanical systems are designed with electronic control unit to take advantage of control parameter adaption to operating conditions and firmware flexibilities as well. On-board diagnosis, which detects the system malfunction and identifies potential source of error with its own diagnostic criteria, and fail-safe that can switch the mode of operation in view of recognized error characteristics enables easy maintenance and troubleshooting as well as system protection. This paper dealt with the development of diagnosis and fail-safe function for proportional flow control valve. All type of errors related to valve control system components are investigated and assigned to a specific hexadecimal codes. Cumulative error detection algorithm is applied in order for the sensitivity and reliability to be appropriate. Embedded simulator which runs simultaneously with system program provides the virtual error simulation environment for expeditious development of error detection algorithm. The diagnosis function was verified both with solenoid valve and embedded simulator test and it will enhance the valve control system monitoring function.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.292-297
• /
• 2004

The conventional computerized numerical controller (CNC) of machine tools has been increasingly replaced by a PC-based open architecture CNC (OAC) which is independent of the CNC vendor. The OAC and machine tools with OAC led the convenient environment where it is possible to implement user-defined application programs efficiently within CNC. Tis paper proposes a method of operational fault cause diagnosis which is based on the status of programmable logic controller (PLC) in machine tools with OAC. The operational fault is defined as a disability state occurring during normal operation of machine tools. The faults are occupied by over 70% of all faults and are also unpredictable as most of them occur without any warning. Two diagnosis models, the switching function (SF) and the step switching function (SSF), are propose in order to diagnose the fault cause quickly and exactly. The cause of an occurring fault is logically diagnosed through a fault diagnosis system (FDS) using the diagnosis models. A suitable interface environment between CNC and develope application modules is constructed in order to implement the diagnostic functions in the CNC domain. The diagnosed results were displayed on a CNC monitor for machine operators and provided to a remote site through a web browser. The result of his research could be a model of the fault cause diagnosis and the remote monitoring for machine tools with OAC.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권3호
• /
• pp.85-93
• /
• 1994

A new diagnosis method is developed in this paper, in which the fuzzy set theory is introduced to diagnose the defects of rolling element bearings. The selection of membership function and the fuzzy operation model are discussed in detail here. The system is successfully used for various defects diagnosis of rolling element bearings.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.272-275
• /
• 1992

A novel fault diagnosis method based on likelihood decomposition is proposed for linear stochastic systems described by autoregressive (AR) model. Assuming that at some time instant .tau. the fault of one of the following two types is occurs: innovation fault (actuator fault); and observation fault (sensor fault), the log-likelihood function is decomposed into two components based on the observations before and after .tau., respectively, Then, the type of the fault is determined by comparing the log-likelihoods corresponding two types of faults. Numerical examples demonstrate the usefulness of the proposed diagnosis method.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.194-199
• /
• 2017

Power transformers are an important factor for power transmission and cause fatal losses if faults occur. Various diagnostic methods have been applied to predict the failure and to identify the cause of the failure. Typical diagnostic methods include the IEC diagnostic method, the Duval diagnostic method, the Rogers diagnostic method, and the Doernenburg diagnostic method using the ratio of the main gas. However, each diagnostic method has a disadvantage in that it can't diagnose the state of the power transformer unless the gas ratio is within the defined range. In order to solve these problems, we propose a diagnosis method using ELM based intelligent algorithm and fuzzy membership function. The final diagnosis is performed by multiplying the result of diagnosis in the four diagnostic methods (IEC, Duval, Rogers, and Doernenburg) by the fuzzy membership values. To show its effectiveness, the proposed fault diagnostic system has been intensively tested with the dissolved gases acquired from various power transformers.

• 한국터널지하공간학회 논문집
• /
• 제24권2호
• /
• pp.183-192
• /
• 2022

터널구조물의 기능 및 성능저하는 도로의 기능상실 등을 유발할 수 있으므로 초기 손상이 심화된 손상으로 진전되지 않도록 선제적 유지관리가 필요하다. 이에 관련 법령에 따라 정기적인 점검/진단이 시행되고 있으나, 점검/진단, 보수/보강 계획 수립 및 실시 등 일련의 과정을 충분히 반영하지 못하고 있다. 따라서 본 연구에서는 도로터널 1,728개소에 대해 시행한 5,540건의 정밀안전점검, 정밀안전진단 사례에 대한 조사/분석을 통하여 합리적인 유지관리 개선 방안을 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.127.2-127
• /
• 2001

A transformer is one of the most important elements in the power network. Transformer faults could cause costly repairs and be dangerous to personnel. To avoid this, its reliable operation has great significance and, therefore, the diagnosis system of the transformer is necessitated. The dissolved gas-in-oil analysis (DGA) is the worldwide popular method of detecting faults such as a hot spot or partial discharges inside the transformer. DGA, however, is not a reliable technique to identify aging phenomena and mechanical faults including insulation failure, inter-turn short, etc. To overcome the drawbacks of DGA, the transfer function method is used to identify effectively these kinds of the mechanical faults. The transformer has a unique transfer function independent of the shape of the input waveform, which can be evaluated through sweep test. This transfer function changes by winding ...

• Childhood Kidney Diseases
• /
• 제26권2호
• /
• pp.86-90
• /
• 2022

Antineutrophil cytoplasmic antibody (ANCA)-associated glomerulonephritis requires prompt diagnosis and treatment, since renal function at the time of diagnosis is significantly associated with renal outcomes. Here, we report two pediatric patients with ANCA-positive glomerulonephritis initially presenting with hematuria, mild proteinuria, and normal renal function. The first patient with a high myeloperoxidase-ANCA titer (>134 IU/mL) was diagnosed with rapidly progressive glomerulonephritis based on renal biopsy and treated with immunosuppressive therapy after 10 months of follow-up. The second patient with a low myeloperoxidase-ANCA titer (11 IU/mL) maintained normal kidney function without medication. Two cases showed different clinical course according to ANCA titer.

• 한방안이비인후피부과학회지
• /
• 제20권3호
• /
• pp.118-126
• /
• 2007

Tongue diagnosis is a profound and special part of the whole Oriental Medicine. We examined the method, the principle and the meaning of tongue diagnosis according to a literature cited, considered a meaning of tongue diagnosis. As a result, we come to a conclusion like that. 1. Tongue is related with internal organs by meridian system, especially has a direct connection with heart and spleen. 2. The heart, a master of internal organs, has its specific opening in the tongue. The spleen, source of nutrients for growth and development, has its specific body opening in the mouth. So tongue reflects states of internal organs, Qi, blood, the constructive energy and the defensive energy. 3. When doing tongue diagnosis, we must pay attention to the position and the order of inspection of the tongue. We must diagnose by referring to a ray of light, diet, season, age, physical constitution, habit and taste, can make a accurate diagnosis. 4. We can classify constitutions, distinguish syndromes, suppose prognosis, make a prescription by using tongue diagnosis. 5. Reddened tip of the tongue represents flaring-up of the heart fire, and it means psychologic stress. Dental identations on the tongue edges represents deficiency of Qi of the spleen, and it means physiologic fatigue. 6. Through observing humidity of fur of the tongue, we can guess psychologic stress and physiologic fatigue. Through observing thickness of fur of the tongue, we can guess function of spleen and stomach.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제5권9호
• /
• pp.285-292
• /
• 2016

최근 차량에 블루투스와 와이파이 등 근거리 통신기능을 부가하여 스마트폰과 연동함으로써, 최신 자동차는 차량 전자제어장치인 ECU를 통하여 자동차 위치정보, 고장 진단정보 등 다양한 정보를 파악할 수 있도록 엔터테인먼트화 되어 가고 있다. 본 연구를 통하여, 온보드 진단기와 스마트폰의 근거리 통신 기능을 활용하여, 차량 온보드 진단기와 연관하여 여러 가지 스마트폰 모델과 블루투스 및 근거리 무선통신인 NFC와의 호환성 시험을 실시하고, 이를 분석해 보았다. 더 나아가, 스마트폰 연동 블루투스 및 NFC 인터페이스 기능을 갖는 온보드 진단기의 단말기 구성과 고장진단 기능 구현을 비롯하여, 고장진단용 디버깅 프로그램을 개발하였다. 또한, OBD-II 인터페이스를 통해 차량의 고장진단 데이터를 추출하였으며, 끝으로 온보드 진단기 CAN 프로토콜 구현 제시와 함께 이의 결과를 분석하였다.