• 보존과학회지
• /
• 제35권2호
• /
• pp.99-115
• /
• 2019

송산리 고분군은 한반도 고대사 연구에 가장 중요한 유적의 하나이나, 발굴 이후 지속적인 외부환경 노출과 인위적 공조시스템의 부작용으로 고분의 온열환경 안정성에 상당한 위협이 초래되었다. 고분군의 현실은 계절변화에 따라 큰 차이가 나타나는 외부 기온과는 달리 연중 $11.4{\sim}22.2^{\circ}C$의 비교적 안정적인 온도분포를 보였고, 표준편차도 3.5 이내로 나타났다. 고분의 미기후 환경에 영향을 미친 주요인은 외부 공기의 유입과 풍향 및 풍속으로, 이는 모두 고분군의 기밀성과 깊은 관련이 있다. 일사는 고분의 봉분두께와 반비례 관계를 보였으며, 봉분이 두꺼운 무령왕릉이 일사의 영향을 가장 적게 받았다. 특히 사람의 출입으로 인한 인위적 환경변화가 내부 환경의 안정성에 가장 큰 영향을 주었으며, 출입인원 및 재실시간에 비례하여 변화하는 특징을 보였다. 현재 송산리 고분군 내부는 밀폐되어 항상 포화상태를 유지하고 있어 결로에 매우 취약한 상태이다. 고분별로 결로 발생 가능성을 분석한 결과, 5호분과 6호분 및 무령왕릉 모두 연중 대부분 결로가 발생하는 것으로 나타났다. 결로는 미생물의 생장을 돕고 부재를 이완시키므로 반드시 적절한 안정화 대책이 수립되어야 한다.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.19-24
• /
• 2012

We demonstrate the desert beetle back mimicking hybrid superhydrophilic/superhydrophobic patterned surface by using the combination method of colloidal lithography and gravure offset printing for nano and micro patterning, respectively. The two methods are cost-effective and industrially available techniques compared to the other nano/micro patterning methods. To verify the water collecting function of the hybrid surface, the water condensation behavior is investigated on the chilled surface in ambient temperature and high humidity. Due to the synergetic effect of drop and film wise condensation, the hybrid superhydrophobic/superhydrophilic surface shows the higher efficiency than one of single wettability surfaces. The work is underway to get the good patterns of hybrid surfaces for water collecting from the dew or fog.

• 한국응용과학기술학회지
• /
• 제38권6호
• /
• pp.1355-1369
• /
• 2021

본 연구는 도로 노면결빙 판정 알고리즘에 대해 알고리즘을 개선하고 실제 현장 측정 자료와 알고리즘 예측값을 비교하였을 때 알고리즘에 대한 적중률을 분석하였다. 분석을 위하여 포천시 신북면 금동리의 도로 및 기상을 측정하였다. 알고리즘은 기존 도로 결빙 알고리즘을 선정하여 실제 결빙 조건 및 측정 수치에 맞춰 4차 알고리즘까지 개선하였다. 최종적으로 응결에 의한 결빙, 강수에 의한 결빙, 적설에 의한 결빙, 결빙상태의 지속, 풍속에 의한 결빙 5개의 알고리즘을 제작하였다. 포천 현장에서 알고리즘을 활용하여 예측할 경우 경우 결빙 적중률이 93.22%까지 개선되었다. 결빙 알고리즘에 대한 조합 비율에 대해 도출하였을 때 응결에 의한 결빙과 결빙상태의 지속에 대한 알고리즘이 96%를 차지하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.48-57
• /
• 1995

본 연구에서는 경골 목조 주택 (2${\times}$4 주택, 2${\times}$6 주택), 통나무 주택 및 콘크리트 주택(내단열, 중단열, 외단열) 벽체에 대하여 유한 요소 해석으로 단열 성능을 평가하였고, 표면 결로 현상을 분석하여 다음과 같은 결론을 얻었다. 1. 벽체의 단열 성능은 정량 골조 2${\times}$6를 사용한 주택이 가장 우수하였고, 경량 골조 2${\times}$4 주택, 통나무 주택, 콘크리트 주택의 순으로 감소하는 것으로 나타났다. 2. 콘크리트 벽체의 내단열, 중단열, 외단열의 벽체 구성법에 따른 단열 성능의 차이는 없었으며, 콘크리트 주택에서 단열재의 사용이 필수적이었다. 3. 내부 결로의 경우 콘크리트 벽체의 외단열이 가장 우수한 결로 예방성을 보였다. 이는 외부에 설치된 단열층이 외부의 낮은 온도를 차단해 벽체 전체의 온도를 높게 유지하기 때문이었다. 표면 결로는 모든 벽체에서 나타나지 않았지만, 실내 습도가 높아진다면 콘크리트 주택의 벽체에서 발생할 가능성이 가장 높았다. 본 연구는 벽체내의 단열 성능에 관하여만 분석을 하였고, 열전달 외에 축열성능 등에 관한 고려는 하지 않았으므로 추후에는 여러 가지 복합적인 열적 성능에 관한 연구가 수행되어야 하리라고 생각한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.276-281
• /
• 2000

A simulation program using the mass transfer correlation was constructed to analyze 1-D simplified condensing flow across the tube bank. Higher efficiency was anticipated by reducing the flue gas temperature down below the dew point where the water vapor in the flue gas is condensed at the surface of the heat exchanger; that is, the heat transfer by the latent heat is added to that by the sensible heat. Thus, there can be an optimum operating condition to maximize the heat recovery from the flue gas. The temperature rises of the flue gas and the cooling water between the inlet and the outlet of the tube bank were compared with the experimental data reported previously. The predicted results agree well with the experimental data. Using this simulation program, the parametric studies have been conducted fur various operating conditions, such as the velocities and temperatures of the vapor/gas mixture and the cooling water, the number of the rows, and the conductivity of the wall material.

• 설비공학논문집
• /
• 제28권2호
• /
• pp.75-80
• /
• 2016

There are three types of dehumidification systems : refrigeration dehumidification method, desiccant dehumidification method and hybrid dehumidification method. The first method involves removing moisture by condensation below the dew point, the second method involves absorption by a desiccant material and the last is an integration method. However, the refrigeration dehumidification system consumes too much power and controlling the humidity ratio is difficult. The desiccant dehumidification system uses less power but it has problems of environmental pollution. The hybrid dehumidification system has the disadvantage of a high initial cost. On the other hand, the energy consumption of the membrane based dehumidification system is lower than for the refrigeration dehumidification system. Also, it is an environmentally friendly technology. In this study, the performance parameters are evaluated for the dehumidification system using a hollow fiber membrane. Available area, duct side dry-bulb temperature, sweep gas flux (flow rate) and LMPD (Log Mean Pressure Difference) were used as the performance parameters.

• 설비공학논문집
• /
• 제19권3호
• /
• pp.228-234
• /
• 2007

Opening an ancient tomb interior can deal fair damage for preservation in long period because of high moisture. In this study, a duct-type HVAC system was installed to preserve an ancient tomb and temperature and humidity was measured to analyze heat environment. Armhole was measured to search whether an ancient tomb receives effects of vibration caused by a duct-type HVAC system. According to the measured data, temperature in an ancient tomb is kept adaptively in conservation regardless of a duct-type HVAC system installation when it rains in summer. The other side, humidity is kept adaptively in conservation when installed duct-type HVAC system. But when it is in natural state, a lot of humidity by dew condensation phenomena. So it needs a duct-type system for an ancient tomb conservation. In the case of vibration, measurement value of 3 satisfy control but Germanic DIN 4150 does not satisfy. Therefore, equip must be such that it can prevent vibration for safety.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.361-365
• /
• 2015

Vanadium dioxide ($VO_2$) of monoclinic phase exhibits Metal Insulator Phase Transition (MIPT) phenomenon involving a sharp change in electrical and optical properties at $68^{\circ}C$. Solution-based process is applied to form uniform $VO_2$ coating layer on ceramic tiles. This can selectively block the near-infrared light to possibly reduce the energy loss and prevent dew condensation caused by the temperature difference. Heat treatment conditions including temperature and dwell time were examined to obtain a monoclinic $VO_2$ single phase. Both rutile and monoclinic $VO_2$ phases were observed from in the tiles post-annealed below $700^{\circ}C$. Desired monoclinic $VO_2$ single phase was grown in the tiles heat treated at $750^{\circ}C$. Nano facets of irregular size were observed in the monoclinic $VO_2$ phase involving the phase-transition. Grain growth of monoclinic $VO_2$ phase was observed as a function of dwell time at $750^{\circ}C$.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.404-411
• /
• 2011

The humidity controlling ceramic materials was developed by applying the phenomena of dew condensation in the capillary. It is said that the humidity range which human feels comfortable is from 40 to 70% in relative humidity. In this study, the ceramic tile using natural soils such as diatomite for interior wall was investigated. In particular, we had introduced novel processing routes for fabricating microcellular ceramics tile using hollow microsphere as a pore former. The microcellular pores in the humidity controlling ceramic materials showed the superior properties such as light-weight, heat insulation. The cell density was ${\sim}1.0{\times}10^9$ cells/$cm^3$ and density of sample was 0.65 g/$cm^3$ in the case of 1.71 wt% hollow microsphere content. Also, it is observed that the BET surface area and the pore volume of the sintered diatomite tile have the values of 40.92 $m^2$/g and 0.173 $cm^3$/g.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.953-958
• /
• 2006

Perimeter zone has been reinforced by active systems, such as fan-coil units, because it causes an increase in heating and cooling loads, dew condensation in winter, or discomfort with cold-draft to residents in buildings, through poor insulation by light-weighed skin due to progressing multi-storied buildings and skyscrapers. However, because these active systems raise Its capacity so that fossil fuel is used as much as they are added, and ultimately, greenhouse effect is urged, we proposed BIPV system functioned as solar collector which can substitute active system. As an early stage, heat balance equation in steady-state by Fortran was used not only for pre-heating effect and electric power capacity during the day in winter, but also for electric power capacity during day in slimmer and sky radiation effect during night in summer. Especially, we should have considered shading on PV, since even a little bit of it makes the efficiency too low for the PV to work. Still, when the flux of pre-heated air was increased to make air-barrier, its temperature was not enough to make it because the speed of heat exchange was too fast to warm up the air, thus the capacity to meet the condition was evaluated, and electric power from PV was made used for it.