• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제5권2호
• /
• pp.27-32
• /
• 2016

개인의 건강 및 상태 정보를 모니터링하기 위한 다양한 센서 기기들이 개발되고 있으며, 스마트폰 상에서 동작하는 응용과 연동을 통해 개인화된 정보를 시각화하여 보여주는 서비스들이 등장하고 있다. 이러한 응용들은 유사한 정보를 사용자에게 제공하면서도 표준화되지 않은 패킷 구조로 인해 센서 기기마다 별도의 응용을 설치해야 하는 문제가 있다. 본 논문에서는 비표준화된 개인용 센서 기기들이 스마트폰과 동적으로 연동될 수 있는 센서 기기 식별 기법을 제안한다. 제안 기법은 센서 기기에 대한 패킷 정보를 서버에 저장하기 때문에 사용하는 센서가 변동되더라도 스마트폰 상에서 동작하는 클라이언트의 변경 없이 응용을 동작할 수 있는 장점이 있다.

• Journal of electromagnetic engineering and science
• /
• 제8권1호
• /
• pp.17-22
• /
• 2008

It is presented that sampling rates for behavioral modeling of quasi-memory less nonlinear devices can be far less than the Nyquist rate of the input signal. Although it has been believed that the sampling rate of nonlinear device modeling should be at least the Nyquist rate of the output signal, this paper suggests that far less than the Nyquist rate of the input signal can be applied to the modeling of quasi-memoryless nonlinear devices, such as frequency multipliers. To verify, a QPSK signal at 820 MHz were applied to a frequency tripler, whereby the device can be utilized as an up-converting mixer into 2.46 GHz with the aid of digital predistortion. AM-AM, AM-PM and PM-PM can be successfully measured regardless of sampling rates.

• 전기전자학회논문지
• /
• 제25권2호
• /
• pp.252-260
• /
• 2021

In this paper, a method of using Software Defined Radio (SDR) is proposed for improving the accuracy of identifying two kinds of signals as Wireless Fidelity (Wi-Fi) signal and Bluetooth signal at the same frequency band of 2.4 GHz based on the time-domain signal characteristic. An SDR device was set up for collecting transmitting signals from Wi-Fi access points (Wi-Fi) and mobile phones (Bluetooth). Different characteristics between Wi-Fi and Bluetooth signals were extracted from the measured result. The SDR device is programmed with a Wi-Fi and Bluetooth detection algorithm and a collision detection algorithm to detect and verify the Wi-Fi and Bluetooth signals based on collected IQ data. These methods are necessary for some applications like wireless communication optimization, Wi-Fi fingerprint localization, which helps to avoid interference and collision between two kinds of signals.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.149-154
• /
• 2015

Biometric techniques for authentication using body parts such as a fingerprint, face, iris, voice, finger-vein and also photoplethysmography have become increasingly important in the personal security field, including door access control, finance security, electronic passport, and mobile device. Finger-vein images are now used to human identification, however, difficulties in recognizing finger-vein images are caused by capturing under various conditions, such as different temperatures and illumination, and noise in the acquisition camera. The human photoplethysmography is also important signal for human identification. In this paper To increase the recognition rate, we develop camera based identification method by combining finger vein image and photoplethysmography signal. We use a compact CMOS camera with a penetrating infrared LED light source to acquire images of finger vein and photoplethysmography signal. In addition, we suggest a simple pattern matching method to reduce the calculation time for embedded environments. The experimental results show that our simple system has good results in terms of speed and accuracy for personal identification compared to the result of only finger vein images.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.937-960
• /
• 2015

Tuned mass dampers (TMDs) have been a prevalent vibration control device for suppressing excessive vibration because of environmental loadings in contemporary tall buildings since the mid-1970s. A TMD must be tuned to the natural frequency of the primary structure to be effective. In practice, a TMD may be assembled in situ, simultaneously with the building construction. In such a situation, the respective dynamic properties of the TMD device and building cannot be identified to determine the tuning status of the TMD. For this purpose, a methodology was developed to obtain the parameters of the TMD and primary building on the basis of the eigenparameters of any two complex modes of the combined building-TMD system. The theory was derived in state-space to characterize the nonclassical damping feature of the system, and combined with a system identification technique to obtain the system eigenparameters using the acceleration measurements. The proposed procedure was first demonstrated using a numerical verification and then applied to real, experimental data of a large-scale building-TMD system. The results showed that the procedure is capable of identifying the respective parameters of the TMD and primary structure and is applicable in real implementations by using only the acceleration response measurements of the TMD and its located floor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.402-404
• /
• 2003

Radio frequency identification (RF-ID) is an automatic data capture (ADC) technology that comprises small data-carrying device(is called Tag) and fixed or mobile device(is called reader). Tags are attached or deattached device. Readers may be installed at locations where data capture is required, and may also be in the form of portable readers. In this paper, we are proposing an application for the subway station using the RF-ID system and a system for the gateless fare collection passing through the booth in only carrying the card. In this system that RF-ID system and Bluetooth are applied. We designed two wireless communication channels. One is the 125kHz communication channel by FSK and PSK for power supplying on the card and identification and the other is 2.4GHz channel for the collection.

• 대한인간공학회지
• /
• 제33권6호
• /
• pp.453-463
• /
• 2014

Objective:The purpose of this study is to identify motion patterns for cellular phone and propose a method to identify motion patterns using a motion capture system. Background: In a smart device, the introduction of tangible interaction that can provide new experience to user plays an important role for improving user's emotional satisfaction. Firstly, user's motion patterns have to be identified to provide an interaction type using user's gesture or motion. Method: In this study, a method to identify motion patterns using a motion capture system and user's motion patterns for using cellular phone was studied. Twenty-two subjects participated in this study. User's motion patterns were identified through motion analysis. Results: Typical motion patterns for shaking, shaking left and right, shaking up and down, and turning for using cellular phone were identified. Velocity and acceleration for each typical motion pattern were identified, too. Conclusion: A motion capture system could be effectively used to identify user's motion patterns for using cellular phone. Application: Typical motion patterns can be used to develop a tangible user interface for handheld device such as smart phone and a method to identify motion patterns using motion analysis can be applied in motion patterns identification of smart device.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.571-577
• /
• 2000

This paper is designed for the identification system of the train using RFID(radio Frequency Identification) in the 134.2㎑. The reader of transmitter transmits an interrogation signal to the tag, then the tag of receiver retransmits the defined data to the reader after receiving the interrogation signal from it. The system is also applied to the reflection communication as a backscatter modulation and selected the passive Pouter system which does not need an active electrical power device. It is useful that ore can effectively manage and control of the information of train such as materials loaded in the train. We make the reader of the identification system for the train which can communicate with the tag installed under the train.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.61-66
• /
• 2015

In this paper, we draw a security assessment by analyzing possible vulnerabilities of the designated PC service which is supposed for strengthening security of current online identification methods that provide various areas such as the online banking and a game and so on. There is a difference between the designated PC service and online identification methods. Online identification methods authenticate an user by the user's private information or the user's knowledge-based information, though the designated PC service authenticates a hardware-based unique information of the user's PC. For this reason, high task significance services employ with online identification methods and the designated PC service for improving security multiply. Nevertheless, the security assessment of the designated PC service has been absent and possible vulnerabilities of the designated PC service are counterfeiter and falsification when the hardware-based unique-information is extracted on the user's PC and sent an authentication server. Therefore, in this paper, we analyze possible vulnerabilities of the designated PC service and draw the security assessment.

• Smart Structures and Systems
• /
• 제10권1호
• /
• pp.47-65
• /
• 2012

The presence of crack-like defects in mechanical and structural elements produces failures during their service life that in some cases can be catastrophic. So, the early detection of the fatigue cracks is particularly important because they grow rapidly, with a propagation velocity that increases exponentially, and may lead to long out-of-service periods, heavy damages of machines and severe economic consequences. In this work, a non-destructive method for the detection and identification of elliptical cracks in shafts based on stress wave propagation is proposed. The propagation of a stress wave in a cracked shaft has been numerically analyzed and numerical results have been used to detect and identify the crack through the genetic algorithm optimization method. The results obtained in this work allow the development of an on-line method for damage detection and identification for cracked shaft-like components using an easy and portable dynamic testing device.