• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• 제23권5호
• /
• pp.385-393
• /
• 2013

In this paper, the mechanism identification and the avoidance measures on the phenomena of transient acoustic vibration amplified at the water-supply piping system to regulate the steam temperature of the boiler reheater in 500MW class supercritical power plant are presented. The pressure pulsation waves induced by the impeller passing of two feed-water pumps with five blades are coincident with the local acoustic modes of boiler reheater water-supply piping system. There are the phenomena amplified at the peaks of 5X, 10X, 15X and 20X in spectrums of piping vibration, sound pressure, and the feed-water's pressure pulsation waves. The shut-off device is installed in the piping system for the interception of pressure pulsation waves transmitted from two feed-water pumps and the modified design change of the piping layout is applied for the acoustic resonance avoidance. The acoustic natural frequencies are separated from the harmonics of pressure pulsation waves induced by the pump impellers passing through the design change of the span length. The acoustic vibration is gone by resonance avoidance measures. As a result, more than 20 dBA reduction is achieved from 100 dBA to 80 dBA.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제37권10호
• /
• pp.1219-1227
• /
• 2013

A new type of wearable robot is developed for a disabled person with disabled limbs, that is, a person who cannot intentionally move his/her legs and arms. This robot can enable the disabled person to grip an object using eye movements. A gaze tracking algorithm is employed to detect pupil movements by which the person observes the object to be gripped. By using this gaze tracking 2D information, the object is identified and the distance to the object is measured using a Kinect device installed on the robot shoulder. By using several coordinate transformations and a matching scheme, the final 3D information about the object from the base frame can be clearly identified, and the final position data is transmitted to the DSP-controlled robot controller, which enables the target object to be gripped successfully.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.129-129
• /
• 2018

Hard coating application is effective way of cutting tool for hard-to-machine materials such as Inconel, Ti and composite materials focused on high-tech industries which are widely employed in aerospace, automobile and the medical device industry also Information Technology. In cutting tool for hard-to-machine materials, high hardness is one of necessary condition along with high temperature stability and wear resistance. In recent years, high-entropy alloys (HEAs) which consist of five or more principal elements having an equi-atomic percentage were reported by Yeh. The main features of novel HEAs reveal thermodynamically stable, high strength, corrosion resistance and wear resistance by four characteristic features called high entropy, sluggish diffusion, several-lattice distortion and cocktail effect. It can be possible to significantly extend the field of application such as cutting tool for difficult-to-machine materials in extreme conditions. Base on this understanding, surface coatings using HEAs more recently have been developed with considerable interest due to their useful properties such as high hardness and phase transformation stability of high temperature. In present study, the nanocomposite coating layers with high hardness on WC substrate are investigated using high entropy alloy target made a powder metallurgy. Among the many surface coating methods, reactive magnetron sputtering is considered to be a proper process because of homogeneity of microstructure, improvement of productivity and simplicity of independent control for several critical deposition parameters. The N2 is applied to reactive gas to make nitride system with transition metals which is much harder than only alloy systems. The acceleration voltage from 100W to 300W is controlled by direct current power with various deposition times. The coating layers are systemically investigated by structural identification (XRD), evaluation of microstructure (FE-SEM, TEM) and mechanical properties (Nano-indenter).

• Smart Structures and Systems
• /
• 제16권3호
• /
• pp.415-433
• /
• 2015

Tendon failures in bonded post-tensioned bridges over the last two decades have motivated ongoing investigations on various aspects of unbonded tendons and their monitoring methods. Recent research shows that change of strain distribution in anchor heads can be useful in detecting wire breakage in unbonded construction. Based on this strain variation, this paper develops a damage detection model that enables an automated tendon monitoring system to identify and locate wire breaks. The first part of this paper presents an experimental program conducted to study the strain variation in anchor heads by generating wire breaks using a mechanical device. The program comprised three sets of tests with fully populated 19-strand anchor head and evaluated the levels of strain variation with number of wire breaks in different strands. The sensitivity of strain variation with wire breaks in circumferential and radial directions of anchor head in addition to the axial direction (parallel to the strand) were investigated and the measured axial strains were found to be the most sensitive. The second part of the paper focuses on formulating the wire breakage detection framework. A finite element model of the anchorage assembly was created to demonstrate the algorithm as well as to investigate the asymmetric strain distribution observed in experimental results. In addition, as almost inevitably encountered during tendon stressing, the effects of differential wedge seating on the proposed model have been analyzed. A sensitivity analysis has been performed at the end to assess the robustness of the model with random measurement errors.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제26권6호
• /
• pp.1387-1399
• /
• 2016

In a hyper-connected society realized through IoT-enabled technology, a large amount of data is collected by various devices and is processed to provide new services to users. While communicating through a network, it is essential for devices to execute mutual authentication since users' privacy can be infringed by malicious attackers. ID-based signature enables authentication and key exchange with a unique ID of a device. However, most of the previous ID-based signature schemes based on RSA require an additional step to share parameters for key exchange so that they are not suitable for resource-constrained devices in terms of efficiency. In this paper, we design an efficient ID-based signature and thereby propose an efficient ID-based authentication and key exchange protocol in which sessions for both an authentication and a key exchange are executed simultaneously. In addition, we prove the security of our scheme under the RSA onewayness problem and analyze the efficiency by comparing with the previous schemes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제11권6호
• /
• pp.130-138
• /
• 2012

There are increasing demands from the industry for intelligent robot-calibration solutions, which can be tightly integrated to the manufacturing process. A proposed solution can simplify conventional robot-calibration and teaching methods without tedious procedures and lengthy training time. iGPS(Indoor GPS) system is a laser based real-time dynamic tracking/measurement system. The key element is acquiring and reporting three-dimensional(3D) information, which can be accomplished as an integrated system or as manual contact based measurements by a user. A 3D probe is introduced as the user holds the probe in his hand and moves the probe tip over the object. The X, Y, and Z coordinates of the probe tip are measured in real-time with high accuracy. In this paper, a new approach of robot-calibration and teaching system is introduced by implementing a 3D measurement system for measuring and tracking an object with motions in up to six degrees of freedom. The general concept and kinematics of the metrology system as well as the derivations of an error budget for the general device are described. Several experimental results of geometry and its related error identification for an easy compensation / teaching method on an industrial robot will also be included.

• Journal of The Korean Association of Information Education
• /
• 제22권3호
• /
• pp.385-396
• /
• 2018

This research supports the idea that manipulative devices can be an effective modality tool for learning abstract concepts involved with identifying geometric shapes and enhance learners' problem solving and motivation. Until recently specified manipulative device has been adapted only in traditional classroom environment and it has been very rare to find devices that is designed for online-basis. This study focused on designing and implementing an educational software which guide learners with geoboard in identification and characteristics of polygons. In addition to the function to draw and to delete various shapes, this software helps learners immediately assess the outcome. The results of the Delphi Technique show promising evidence for it being a very efficient means to learn geometric shapes and increase learners' motivation to learn the subject matter.

• Korean Journal of Remote Sensing
• /
• 제28권2호
• /
• pp.245-253
• /
• 2012

The public and civilian demands regarding 3D geo-spatial information processing on mobile device including smartphone are increasing. But there are few actual implementations or application cases. This work is to present some results by a prototype implementation of 3D terrain information visualization function with satellite image and DEM using HTML5 WebGL, which is a web-based graphic library under the standardization process. This is a useful standard for cross-platform operation for 3D graphic rendering without other plug-in modules. As the results, in the different types of operating system or browser in a personal computer or a smartphone, it shows same rendering results, as long as they support HTML5 WebGL. As well;geo-metadata search and identification functions for data sets for 3D terrain visualization process are added in this implementation for the practical aspect.

• Archives of design research
• /
• 제15권3호
• /
• pp.83-92
• /
• 2002

In the 21st century, as localization is reinterpreted as an important part of globalism and as local culture is recognized as a device to increase the competitive power, every city is trying to develop its identity and improve its image while coping with change of the international and domestic environment. Therefore, basic research was preformed to establish the city image identity of Gwangju and as a result, an ideological slogan " City of Light and Life, Gwangju" and basic factors were developed. This study aims to analyze the condition of the city, focusing on design factors that the city image is comprised of, and establishes a long-term strategy for urban environment development by considering the developmental potential of the city. and focuses on case studies for establishment of an image suitable for Gwangju. Case studies focusing on the urban environmental development were presented and the results were applied to Gwangju. From the results, further studies can be pursued according to a long-term strategy. strategy.

• Journal of Internet of Things and Convergence
• /
• 제1권1호
• /
• pp.39-44
• /
• 2015

Organization is increasing the authorizing process to use public certificate and bio information. Certificate, has evolved to be able to parallel distributes the bio authentication and portable bio-authentication device. Authentication using an individual's PC and smart devices continue to generalize, while convenience for authentication is increased by comparison Study on cooperation with the security at the network level's a weak situation. If ask authentication method through the cooperation of the public certificate and bio information work with current network access control, there is a possibility to develop a more powerful security policy. by cooperation weaknesses against vulnerable personal authentication techniques on security token in a reliable and secure personal authentication techniques, such as bio-recognition, Bio Information for identification and to prevent exposing a methodology suggest to validate whether or not to carry out in this paper. In addition, organize the scenario that can work with the 802.1x network authentication method, and presented a proposal aimed at realization.