• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.2
• /
• pp.127-131
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other home network via Internet through IGD DCP with control commands of UPnP.

• Journal of Energy Engineering
• /
• v.14 no.2 s.42
• /
• pp.112-116
• /
• 2005

This paper describes the implementation of DCS communication network that provides high bandwidth and reliability. The network for DCS in this paper adopts the Reflective Memory (RM) architecture and Fast Ethernet physical media that have 100 Mbps bandwidth. Also, This network uses Ring Enhancement Device (RED) which is invented to reduce the time delay of each node. The DCS network that is introduced in this paper is named as ERCNet (Ethernet based Real-time Control Network). This paper describes the architecture and working algorithms of ERCNet and performs numerical analysis. In addition, the performance of ERCNet is evaluated by experiment using the developed ERCNet network.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.155-160
• /
• 2011

IPTV functions not only as media player that does play the broadcasting industry's contents, also as the gateway is guaranteed of QoS(Quality of Service). This is for free contents-sharing that device stores contents using home network circumstance, and is for watching with seamless network service. Also this have required next QoS model that can handle stably as it may contain more data of the small computing device in next generation home system. We need ubiquitous-oriented QoS's design and development project that focuses on internal and external media service, not the existing QoS nor one-sided QoS of media sevice industry. This paper focuses on network module development. This supports IPTV in media industry and two-way capability of QoS highlighting multimedia service in network industry. In additional, this can handle stably the multiplex signal of USN/RFID as the representative ubiquitous and home network that services high-speed wire and wireless interface, and support the seamless u-QoS.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.516-526
• /
• 2007

Wireless mesh network is not only WLAN technology but it says core technology for implementation of ubiquitous network and we have to application on a various field through connection with the sensor network. However, there are limited to 100mW in the maximum power because WLAN is used into transmission frequency band to ISM band. The mesh network based on WLAN is essential study for a long distance transmission in the limited maximum power that it is doing to cost-efficient network of backbone. Therefore, in this paper, we have presented an conquerable method to limitation of reaching distance of wireless mesh network and made several experiments to presentation the proposed method. The results show that it is possible to rise a long distance transmission and power efficiency into application of various antenna and function definition and implementation of device driver.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.436-445
• /
• 2011

As automation systems become intelligent and autonomous for productibility, industrial networks (fieldbuses) and network-based devices are essential components of intelligent manufacturing systems. However, there are obstacles for the wide acceptance of the network-based devices such as smart sensor and network-based actuator. First, there exist numerous fieldbus protocols that a network-based device should be able to support. Second, the whole network-based device has to be replaced when only the sensor of the module fails. In order to overcome these obstacles, a smart sensor/actuator is implemented as two units; one responsible for network communication and the other for sensor/actuator operations using IEEE 1451.0 standard. This paper presents a structure of the 1451.0-based smart sensor with multiple connectivity function designed by CANopen.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.33-47
• /
• 2015

Cellular Network assisted device-to-device (D2D) communication has been growing to reduce the overload of eNodeB and mitigate the frequency shortage. However, by sharing the uplink frequency resource with the cellular network, the interference between cellular and D2D is increased. In this paper, we propose an advanced receiver for full suppression cancellation (FSC) to reduce the interference between cellular and D2D. The proposed receiver can suppress and cancel the interference by integrating the interference rejection combining (IRC) technique with successive interference cancellation (SIC). We perform a system level simulation based on the 20-MHz bandwidth of the 3GPP LTE-A system. Simulation results show that the proposed receiver can improve SINR, throughput and spectral efficiency compared to conventional receivers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3399-3406
• /
• 2015

NRD(Network RamDisk) is a scheme which allows a system to use the memory of the remote systems just as his own block device via networking. Basically, it consists of a client requesting an NRD access and server providing the NRD. In this paper, we describe the design, implementation and experiment of the block device driver for accessing the NRD in the Linux kernel(2.6) level. First of all, we have analyzed the flow of processing the requests for accessing the block devices in the traditional Linux kernel and figured out the additional functions required for supporting the NRD. Then we have designed and implemented the device diver of NRD client and NRD server for providing these functions. Finally, we have established a NRD server system, and reviewed its functional feasibility by experimenting the requests of NRD access through the NRD device driver implemented on a NRD client.

• 한국IT서비스학회:학술대회논문집
• /
• 2007.11a
• /
• pp.595-598
• /
• 2007

급변하는 경쟁환경에서 텔코 진영의 미디어서비스가 특정단말이나 특정 네트워크에 종속되어서는 더 이상 경쟁환경에서 차별화를 위한 서비스 제공이 어렵게 된다. KT 인프라연구소에서는 pCod(Portable/Personal Contents on Demand) 서비스라는 이름으로 차세대 미디어의 기본 컨셉이 될 Anywhere, Anytime, Any-work, Any-device를 위한 서비스 플랫폼을 개발하였다. 본 논문에서는 KT인프라연구소에서 개발하여 광주 FTTH 시험사업에 적용한 pCod 서비스와 개인 맞춤 방송 서비스에 대하여 기술하였다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.270-273
• /
• 1999

This paper describes the characteristics of two methods about providing information needed for propulsion device control in train. The one is to use new way using the communication network for transmission of control information, the other is traditional way using hardwire connection. And this paper describes the communication interface technique between TCMS(Train Control and Monitoring System) and VVVF inverter system with LonWorks network adapted to SMG line 6 which has been developed. With this technique, an inertia load test carried out for the traction control environment and it is expecting a field test at SMG line 6.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.33-35
• /
• 2000

We propose a intelligent controller for FACTS(Flexible AC Transmission System) device to stabilize a power system. In order to identify the nonlinear characteristics of the power system and to estimate a control signal, an artificial neural network is utilized. The control signal which is provided for FACTS device installed in the network is produced. The proposed controller is applied to Unified Power Flow Controller(UPFC) to verified the effectiveness of the proposed control system. The results show that the proposed nonlinear FACTS controller is able to enhance the transient stability of three machine nine bus power system.