• 한국지반공학회논문집
• /
• 제24권4호
• /
• pp.37-46
• /
• 2008

포장재료의 역학적 특성을 대표하는 회복탄성계수는 '86 AASHTO 설계법에서 노상의 기본입력 물성치로 적용한 이후 포장 설계, 해석뿐 아니라 포장 평가, 유지관리 등에도 보편적 개념으로 정착되어 가고 있다. 국내 노상토의 회복탄성계수는 함수비와 건조단위중량으로 대표되는 재료적 요인과 축차응력 및 구속응력에 대단히 큰 영향을 받고 있고, 하중주파수의 영향은 있으나 그 정도가 크지 않고, 하중반복횟수의 영향은 무시 가능한 것으로 알려져 있다(건설교통부 2003). 따라서 국내 포장재료에 따른 회복탄성계수의 적절한 평가는 국내 포장구조체의 역학거동 및 공용성 평가를 위해 매우 중요한 사항이다. 이와 같은 배경으로 본 연구에서는 국내 노상토 재료의 역학적 특성 변화를 포장 단면설계에 합리적으로 반영하기 위한 노상토 해석모델을 제안하였고, 제안된 모델을 적용한 유한요소해석 결과와 시험도로 실측치와의 비교 검증을 통해 제안된 모델의 신뢰성을 검증하였다.

• Structural Engineering and Mechanics
• /
• 제6권7호
• /
• pp.817-826
• /
• 1998

A finite element model based on the incremental endochronic theory for flexible pavement materials was developed in this study. Three grid systems with eight-node cubic isoparametric elements, and different loading steps were used to perform the calculations for a specimen of circular cylinder. The uniaxial stress experimental results on an asphalt mixture at $60^{\circ}C$ in SHRP conducted by University of California at Berkeley were used to check the ability of the derived numerical model. Then, the numerical results showed isotropic response and deviatoric response on the specimen in a three dimensional manner, which provided a better understanding for a deformed flexible material under the specified loading conditions.

• 콘크리트학회논문집
• /
• 제16권3호
• /
• pp.345-356
• /
• 2004

다양한 압축 응력 상태에서의 콘크리트의 거동 특성을 나타내기 위한 소성 모델을 개발하였다. 응력 성분은 압축 상태에서 각각의 거동특성을 갖는 세 개의 직교 성분으로 분리하였다. 각 성분의 거동 특성을 독립적으로 나타내기 위하여 각 성분에 대한 독립적인 다중 파괴기.준을 이용하는 소성모델을 적용하였다. 각 파괴면은 실험결과에 근거하여 각 파괴기준에 대한 등가 소성 변형률에 의하여 정의하였다. 또한, 압축손상에 의한 체적팽창을 나타내기 위한 간단한 비상관 소성흐름법칙을 제안하였다. 제안된 모델은 다양한 재료 특성 및 응력 상태를 갖는 기존의 실험 결과들과 비교를 통하여 검증되었다. 이 비교는 기존의 소성모델보다 제안된 모델의 적용성이 우수함을 입증하고 있다.

• Structural Engineering and Mechanics
• /
• 제61권3호
• /
• pp.317-323
• /
• 2017

This work presents a new strategy to model stress dependent relaxation process in large deformation. The strategy is relied on the fact that in some particular soft materials undergoing large deformation, e.g., elastomers, rubbers and soft tissues, the relaxation time depends strongly on stress levels. To simplify the viscoelastic model, we consider that the relaxation time is the function of previous elastic deviatoric stress state experienced by materials during loading. Using the General Maxwell Model (GMM), we simulate numerically conditions with the constant and the stress dependent relaxation time for uniaxial tension and compression loading. Hence, it can be shown that the proposed model herein not only can represent different relaxation time for different stress level but also maintain the capability of the GMM to model hysteresis phenomena.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.5-16
• /
• 1996

실리카질 모래에 대한 많은 시험결과로부터 삼축압축시첩과 평면변형시험간의 강도관계를 밀도와 파괴시 유효평균주응력의 함수로 표현하였다. 또한 파괴시 평균주응력과 축차응력간의 응력비가 내부마찰각의 함수로 잘 규정되었으며 그 비는 내부마찰각의 증가에 따라 감소하였다. 또한 중간주응력을 최대주응력과 최소주응력으로써 표현하였으며 이론적인 파괴면의 각도와 평면변형시험에서 관찰된 파괴면의 각도가 비교적 잘 일치함이 확인되었다.

• Geomechanics and Engineering
• /
• 제5권1호
• /
• pp.71-86
• /
• 2013

For rock materials, a transversely isotropic failure criterion established through the extended Lade-Duncan failure criterion incorporating an anisotropic state scalar parameter, which is a joint invariant of deviatoric microstructure fabric tensor and normalized deviatoric stress tensor, is verified with the results of triaxial compressive data on Tournemire shale. For torsional shear mode with $0{\leq}b{\leq}0.75$, rock shear strengths decrease with ${\alpha}$ increasing until the rock shear strength approaches minimum value at ${\alpha}{\approx}40^{\circ}$, and after this point, the rock shear strengths increase as ${\alpha}$ increases further. For the torsional shear mode with b > 0.75, rock shear strengths are almost constant for ${\alpha}{\leq}40^{\circ}$, but it increases with increase in ${\alpha}$ afterwards. The rock shear strength variation against ${\alpha}$ agrees with shear strength changing tendency of heavily OCR natural London Clays tested before. Prediction results show that the transversely isotropic failure criterion proposed in the paper is reasonable.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.198-198
• /
• 2018

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.317-333
• /
• 2014

The study of the mechanical behavior of rockfill materials under three-dimensional loading conditions is a current research focus area. This paper presents a microscale numerical study of rockfill deformation and strength characteristics using the Combined Finite-Discrete Element Method (FDEM). Two features unique to this study are the consideration of irregular particle shapes and particle crushability. A polydisperse assembly of irregular polyhedra was prepared to reproduce the mechanical behavior of rockfill materials subjected to axial compression at a constant mean stress for a range of intermediate principal stress ratios in the interval [0, 1]. The simulation results, including the stress-strain characteristics, relationship between principal strains, and principal deviator strains are discussed. The stress-dilatancy behavior is described using a linear dilatancy equation with its material constants varying with the intermediate principal stress ratio. The failure surface in the principal stress space and its traces in the deviatoric and meridian plane are also presented. The modified Lade-Duncan criterion most closely describes the stress points at failure.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.325-343
• /
• 2016

A total stress-based bounding surface model is developed to predict the undrained behaviour of saturated soft clays under cyclic loads based on the anisotropic hardening modulus field and bounding-surface theories. A new hardening rule is developed based on a new interpolation function of the hardening modulus that has simple mathematic expression and fewer model parameters. The evolution of hardening modulus field is described in the deviatoric stress space. It is assumed that the stress reverse points are the mapping centre points and the mapping centre moves with the variation of loading and unloading paths to describe the cyclic stress-strain hysteresis curve. In addition, by introducing a model parameter that reflects the accumulation rate and level of shear strain to the interpolation function, the cyclic shakedown and failure behaviour of soil elements with different combinations of initial and cyclic stresses can be captured. The methods to determine the model parameters using cyclic triaxial compression tests are also studied. Finally, the cyclic triaxial extension and torsional shear tests are performed. By comparing the predictions with the test results, the model can be used to describe undrained cyclic stress-strain responses of elements with different stress states for the tested clays.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.816-824
• /
• 1996

The densification behaviors of copper powder under high temperature processing were investigated. Experimental data were obtained for copper powder under hot isostatic pressing, hot pressing and uniaxial compression. Finite element calculations from the constitutive models by McMeeking and co-workers were compared with the experimental data, The agreements between experimental data and theoretical calculations are reasonably good when hydrostatic stress is dominant, but not as good then deviatoric stress increases.