• Geomechanics and Engineering
• /
• 제21권3호
• /
• pp.301-313
• /
• 2020

In the process of mining closely spaced coal seams, the problem of roadway arrangement in lower coal seams has long been a concern. By means of mechanical model calculation and numerical simulation postprocessing, the distribution of the stress deviator below the floor of a goaf and the evolution of the stress deviator in the vertical and horizontal directions are studied under the influence of horizontal stress. The results of this theoretical study and numerical simulation show that the stress deviator decreases exponentially with increasing depth from the floor below the coal side. With the increase in the horizontal stress coefficient λ, the stress deviator concentration area shifts. The stress deviator is concentrated within 10 m below the goaf and 15 m laterally from the coal side; thus, the magnitude of the surrounding rock stress deviator should be considered when planning the construction of a roadway in this area.

• 한국농공학회논문집
• /
• 제48권7호
• /
• pp.35-43
• /
• 2006

This study was carried out to investigate the liquefaction behaviour and predict deviator stress with matric suction, of unsaturated silty sand. The unsaturated soil tests were conducted using a modified triaxial cell and specimens were prepared using the moisture tamping method. The axis translation technique was used to create the desired matric suctions in the specimen. Undrained triaxial compression tests were carried out at matric suction of 0, 2, 5, 10 and 25 kPa. The specimens were sheared to axial strains of about 20% to obtain steady state conditions. The results showed that liquefaction of silty sand only occurs at matric suction of 0 kPa and 2 kPa. The results also show that at matric suctions of 5, 10 and 25 kPa, the resistance to liquefaction increases. As the suction increases, the undrained effective stress path approached the drained stress path. Also, the predicted and measured maximum deviator stress for unsaturated soils using the effective stress concept showed good agreement as matric suction increases. The deviator stress increase is nonlinear as matric suction increases.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.382-387
• /
• 1998

Triaxial compression tests were run to study on the undrained strength characteristics of fiber mixed kaolin clay(Hadong). The influence of various test parameters such as amount and aspect ratio(ratio of length to diameter) of fiber, confining stress was also investigated. Test results showed that the increase in aspect ratio was increased in deviator stress at failure, but no effect on pore water pressure at failure. Deviator stress at failure was also increased at 0.5％ mixing ratio(weight fraction of fiber to that of soil solid) of fiber but it was, thereafter, decreased and wits reached to constant after 2％ mixing ratio. On the contrary, Pore water pressure at failure was increased as mixing ratio of fiber was greater than 1%. Deviator stress and pore water pressure of both clay and fiber mixed clay(FMC) at failure were increased as confining stress was increased. Deviator stress of FMC at failure was about 10％ larger than that of clay, but pore water pressure of FMC at failure was almost similar to that of clay.

• 한국전산구조공학회논문집
• /
• 제23권3호
• /
• pp.303-314
• /
• 2010

이 논문에서는 외부강선으로 긴장된 PSC 거더의 비선형 해석방법에 대한 연구를 수행하였다. 외부강선은 정착부와 편향부에서만 부재와 일체로 거동을 하고 정착부-편향부, 편향부-편향부 사이에서 독립적인 거동을 보이는 특성으로 인해 구조물의 처짐이 증가할 경우 부재와 외부강선의 편심량이 감소하여 모멘트가 변화하는 2차 효과(secondary effect)가 발생한다. 또한 편향부에서 외부강선의 인장력 차이로 인해 슬립(slip)이 발생할 경우 외부강선의 인장력이 재분배되어 복잡한 비선형 거동을 보이게 된다. 이 논문에서는 정착부-편향부, 편향부-편향부 사이의 외부강선을 여러 개의 곡선요소로 모사하고, 편향부에서의 마찰력과 driving force(미끄러지는 힘)의 평형관계를 이용하여 외부강선의 인장력을 재분배함으로써 편향부에서의 슬립효과를 고려하였다. 이 논문에서 제시한 외부강선의 유한요소모델과 해석방법을 저자들이 개발한 시공단계를 고려한 PSC 뼈대의 비선형 해석 프로그램에 통합하고, 외부강선으로 긴장된 PSC 보의 해석에 적용하여 외부강선에 대한 유한요소모델 및 해석방법의 정당성과 적용성을 확인하였다. 또한 편향부의 수와 편향부에서의 마찰계수에 따른 극한거동을 검토해본 결과, 편향부의 수가 증가할수록 PSC 보의 항복하중과 극한하중은 증가하였으며, 편향부에서의 마찰계수에 따른 극한거동은 외부강선과 편향부 사이의 마찰력으로 인해 부재에 전달되는 모멘트의 영향에 따라 마찰계수가 적정한 값일 경우에 극한내력이 최대치를 보이는 것을 확인하였다.

• 대한건축학회논문집:구조계
• /
• 제34권6호
• /
• pp.3-10
• /
• 2018

This paper described the shear strengthening effect by deviator location in pre-damaged reinforced concrete (RC) beams strengthened with externally post-tensioning steel rods. Three reinforced concrete beams as control beam and eight post-tensioned beams using external steel rods were tested to fail in shear. The externally post-tensioning material was a steel rod of 22 mm diameter, and it had a 655 MPa yield strength and an 805 MPa tensile strength. Specimens depend on multiple variables, such as the number of deviators, location of deviator, and load pattern. The pre-damaged loads up to about 2/3 of ultimate shear capacities were applied to specimens using displacement control and the diagonal shear crack just occurred at these loading levels. And then, the post-tensioning up to when a strain of steel rod reaches about $2000{\mu}{\varepsilon}$ was continuously applied to beam. A displacement control was changed to a load control during post-tensioning. The post-tensioning resulted in increase of load-carrying capacity and restoration of existing deflection. Also, it prevented the existing diagonal cracks from excessively growing. Two deviators effectively improved the load capacity when compared with in case of test which one deviator at mid-span installed. When deviators were located near region which the diagonal crack occurred on, the strengthening impact by post-tensioning was greater.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.185-192
• /
• 2003

This study consolidation undrain Triaxial Compression Tests using constant confining pressure in clay that receive preconsolidation stress that is different and, void ratio, pore water pressure coefficient, shear strength compare with another thing theory and studied analyzing change relation of elastic modules. The summary of analysis is follows: If preconsolidation stress increases in same confining stress in relation of preconsolidation stress and deviator stress, deviator stress is proportional and increased. Can know that excess void pressure is proportional and decreases in size of preconsolidation stress in same confining stress state if preconsolidation stress increases preconsolidation stress and relation of excess void pressure. Also, over consolidated state can assume that this is thing by Dilatancy's effect though excess void pressure decreased remarkably. Preconsolidation stress and relation of stress path can know that shear strength degree increases preconsolidation stress increases, and specially, preconsolidation stress was appear in stress path form of overconsolidated state case of clay that receive at 300, 400, 500kPa in 100, 150kPa's deviator stress.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.90-99
• /
• 1994

To investigate the undrained shear strength characteristics of marine soils with high water content, high compressibility and weak bearing capacity, a series of undrained triaxial tests with pore pressure measurements on undisturbed and disturbed Banwol marine clay in normally consolidated and overconsolidated states is carried out. The results and main conclusions of this study are summarized as follows : 1 . When the consolidation pressure is increased, the maximum deviator stress of disturbed and undistubed clay in normally consolidated state is increased. Pore pressure parameters and internal friction angle of undisturbed clay are greater than those of disturbed clay. 2. The relationship between pore pressure and axial strain of undisturbed clay in normally consolidated state can be expressed as a hyperbolic function like stress-strain relation proposed by Kondner. 3. In the pore pressure-axial strain relation of disturbed clay in normally consolidated state, failure ratio R'f is greatly deviated in the range of 0.7~0.9 proposed by Christian and Desai. 4. For overconsolided clay, when overconsolidation ratio (OCR) is increased, normalized maximum deviator stress is increased and maximum pore pressure is decreased gradually. 5. Cohesion of overconsolidated clay is greater than that of nomally consolidated clay and internal friction angle slightly is decreased. 6. Pore pressure parameter at failure (Af) of overconsolidated clay is varied with OCR, Af becomes negative values with increment in OCR

• 대한토목학회논문집
• /
• 제31권1C호
• /
• pp.39-51
• /
• 2011

작은 입자 사이에 고립된 상태로 존재하는 굵은 입자는 비록 소량일지라도 흙의 전단거동에 영향을 미칠 수 있다. 이와같이 소량의 굵은 자갈이 포함된 지반의 전단특성을 평가할 경우, 실내시험에 사용되는 자갈의 크기와 공시체의 직경이 전단거동에 영향을 미칠 수 있다. 따라서 본 연구에서는 모래 입자 사이에 흩어져 있는 자갈의 크기와 공시체의 직경을 달리하면서 모래-자갈 혼합토의 전단특성을 연구하였다. 크기가 7, 12, 15, 18, 22mm인 다섯 종류의 자갈을 반복 사용하였으며, 각층 높이의 중간부분에 자갈을 넣고 다음 층을 쌓아 다지는 방식으로 조밀한 공시체를 완성하였다. 층당 들어가는 자갈의 크기에 따라 습윤모래를 5층 또는 10층으로 나누어 다져 직경 5cm(높이 10cm) 및 10cm(높이 20cm)인 공시체를 제작하였다. 자갈의 중량비는 3%로 동일하며 세 종류의 구속압으로 압밀시킨 다음, 비배수 삼축압축시험을 실시하였다. 직경 10cm인 공시체에서 얻은 최대축차응력은 직경 5cm인 공시체의 최대축차응력보다 자갈이 없는 경우 평균 30% 정도 높았으며, 자갈이 포함된 경우 최대 90%까지 증가하였다. 7mm와 12mm 자갈이 들어간 경우, 직경이 10cm인 공시체는 자갈의 크기에 관계없이 모두 자갈이 없는 경우보다 최대축차응력이 증가하였으나, 직경이 5cm인 공시체는 자갈의 크기에 따라 최대축차응력이 자갈이 없는 경우보다 증가하거나(7mm 자갈이 들어간 공시체) 또는 감소하였다(12mm 자갈이 들어간 공시체). 공시체 직경과 자갈의 크기가 비배수 전단거동에 큰 영향을 미쳤으며, 자갈과 공시체 직경의 비 1/5을 기준으로 자갈이 포함된 공시체의 최대축차응력이 자갈이 없는 경우보다 증가 또는 감소하였다.

• 콘크리트학회논문집
• /
• 제18권5호
• /
• pp.603-610
• /
• 2006

철근콘크리트 구조물의 외부 비부착 보강방식은 다른 보강기법과 비교하여 설치가 빠르며 간단하다는 장점을 가진다. 고장력 인장봉을 사용한 보강방식은 강판 또는 탄소섬유쉬트 부착공법과는 달리 설치를 위한 콘크리트 표면가공이 필요치 않고 환경적인 조건에 영향을 받지 않는다. 본 연구를 통해 개발된 보강방식은 정착핀 또는 정착판을 통하여 보의 단부에서 고장력 인장봉과 RC보를 연결하는 보강방식이다. 여기에 편심기를 통하여 외부보강 강봉이 RC보의 곡률에 대응하도록 하였다. 본 논문에서는 보강된 RC보에 관한 총 10개의 실험체 제작하여 실험을 실시하였다. 실험의 주요 변수는 보강재료의 직경, 강봉 보강의 깊이와 개수이다. 본 논문에서는 본 연구를 통하여 개발된 보강공법으로 보강된 RC보의 구조적 거동을 기술하였으며, 보강된 RC보의 실험 결과를 무보강 실험체와 비교하였다. 실험결과 제안된 보강방법은 무보강 실험체와 비교하여 매우 우수한 강도 증진효과를 나타내었고 편심장치의 사용은 효율성을 향상시켰다. 또한, 두개의 편심기를 사용한 실험체는 1개의 편심장치를 사용한 실험체에 비해 모멘트 성능이 우수하였고, 외부보강 강봉은 보의 휨강도 뿐만 아니라 전단강도를 향상시키는 결과도 가져왔다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.662-667
• /
• 1998

Recently, the using PSC with external unbonded tendons is increased. However, the behavior of external unbonded tendons is different with that of bonded internal tendon at ultimate state by compatibility condition, the slip with friction at deviator and the change of tendon eccentricity e.t.c., So, the analytical research considered the effect of these inherent characters was performed and the tendency of external unbonded tendons was estimated by numerical examples. By the analytical results, load-deflection relationship and stress increment of external unbonded tendons were similar to those of internal bonded tendon at initial elastic behavior state. Those characters were, however, smaller than those character of internal bonded tendons. For external unbonded tendons, if the 1 deviator which is positioned at maximum moment point and more 2 deviators which are position between maximum moment point and support are existed, the flexural behavior is similar to internal bonded tendons.