• Environmental Analysis Health and Toxicology
• /
• 제25권2호
• /
• pp.161-168
• /
• 2010

The observed the toxic effect of WSF (Water Soluble Fraction) on development time, development rate, attachment rate, survival rate and growth of the larva during the early stage of the Pacific oyster, Crassostrea gigas. The time required early juvenile from the fertilized eggs exposed to crude oil (WSF) was about 13 hours in control group. But that of the crude oil dose group takes 12 hours, with shorter compared to control group. Development and attachment rate of the oyster significantly higher in 0.4 and 0.8 mg/L WSF compared to control group (P<0.05) but significantly lower more than 1.6 mg/L WSF (P<0.05). Survival rate of the oyster larva significantly higher in 0.4 and 0.8 mg/L WSF compared to control group (P<0.05) but significantly lower more than 2.4 mg/L WSF (P<0.05). Survival rate of spot showed no significantly difference compared to control group (P>0.05). Shell growth of the oyster were significantly lower more than 1.6 mg/L WSF compared control group (P<0.05). The effect concentration of crude oil showed that more 0.4 mg/L in development and attachment rate and more 1.6 mg/L in growth. Also, chronic exposure of crude oil even effect also in low concentration.

• Plant Resources
• /
• 제8권3호
• /
• pp.281-285
• /
• 2005

In order to select suitable fertilizer level and sowing rate of Dangyo $^{#8}$(hybrid) rapeseed at the southern area of Korea, two varieties of Naehanyuchae (Normal) and Dangyo $^{#8}$(hybrid) rapeseed currently grown for oil production by two fertilizer level with 10-8-8 kg/10a and 15-8-8 kg/10a and three sowing rate with 500 g/10a, 1,000g/10a and 1,500g/10a with relatively high yield was grown at the same condition yield and yield components were observed. Dangyo $^{#8}$(hybrid) rapeseed was superior to oil-eed rapeseed for yield at the 15-8-8 kg/10a of fertilizer and 1,500 g/10a of sowing rate. Fertilizer level, $N-P_{2}O_5-K_{2}O$ = 15-8-8 kg/10a and sowing rate, 1,500 g/10a showed somewhat higher value in two varieties of Naehanyuchae(Normal) and Dangyo $^{#8}$(hybrid).

• 열처리공학회지
• /
• 제18권2호
• /
• pp.112-118
• /
• 2005

Study was focused on the effect of the cooling rate on the embrittlement behavior of Zircaloy-4 cladding simulated Loss Of Coolant Accident (LOCA) environment. Claddings were oxidized at given temperature and given time followed by various water quenching in the range of $0.6^{\circ}C$ and $100^{\circ}C$ per second. Cladding failed after water quenching above the threshold oxidation. Threshold oxidation was decreased as the cooling rate increased, which is due to the matensite structure formed during fast cooling rate.

• 한국수정란이식학회지
• /
• 제24권1호
• /
• pp.21-27
• /
• 2009

This study was performed to elucidate the effects of addition of ${\beta}-lactoglobulin$ and bovine serum albumin (BSA) in vitro maturation (IVM) and in vitro culture (IVC) medium on porcine embryo production. The development rate to the 2 cell ($71.4{\sim}75.6%$) and blastocyst stages ($6.8{\sim}13.3%$) with different BSA concentrations in IVM medium were similar among treatment groups. Blastocyst hatching rate was significantly higher in the control group (0.0mg/ml) than in the group of 1.0mg/ml supplement (20.0% vs. 0.0%; p<0.05). The development rate to the 2 cell ($62.0{\sim}70.6%$) and blastocyst stages ($15.4{\sim}38.5%$) with different ${\beta}-lactoglobulin$ concentrations in IVM medium was similar among treatment groups. The development rate to the blastocyst was significantly higher in the group of 1.0mg/ml(15.3%) than in the group of 0.5mg/ml supplement (7.6%, p<0.05). The development rate to the 2 cell and blastocyst stages following the first addition of ${\beta}-lactoglobulin$ in IVM medium was significantly higher in the control group (77.0% and 18.9%) and was $0{\sim}44\;hr$(77.2% and 16.9%) greater than that observed in other treatment groups (p<0.05). The development rate to the 2 cell stage ($68.1{\sim}74.8%$) and blastocyst stages ($9.2{\sim}12.7%$) with different BSA concentrations in IVC medium was similar among treatment groups. However, blastocyst hatching rate was significantly higher in the group of 3.0mg/ml supplement (30.0%) than in the control group (0.0%; p<0.05). The development rate to the 2 cell stage ($72.9{\sim}78.0%$), blastocyst ($7.1{\sim}14.2%$) and hatching stages ($33.3{\sim}38.1%$) were not different. The development rate to the 2 cell stage ($63.6{\sim}72.5%$), blastocyst ($8.4{\sim}16.1%$) and hatching stages ($18.2{\sim}37.5%$) at the different culture periods were similar among treatment groups. This study suggested that if the addition level and periods of ${\beta}-lactoglobulin$ addition are adjusted, it is possible to replace BSA in the in vitro porcine embryo production.

• 한국동물생명공학회지
• /
• 제39권1호
• /
• pp.40-47
• /
• 2024

Background: Sperm quality and the number of sperm introduced into the uterus during artificial insemination (AI) are pivotal factors influencing pregnancy outcomes. However, there have been no reports on the relationship between sperm concentration at AI and sperm quality in Hanwoo cattle. In this study, we examined sperm quality and pregnancy rates after AI using sperm inseminated at different concentrations. Methods: We evaluated the motility, viability, and acrosomal membrane integrity of sperm at different concentrations (10, 15, 18, and 20 million sperm/straw) in 0.5-mL straws. Subsequently, we compared the pregnancy rates after AI with different sperm concentrations. Results: After freeze-thawing, sperm at the assessed concentrations showed similar viability and acrosomal membrane integrity. After AI, cattle in the 10 million group had significantly lower pregnancy rates compared to those in the 18 and 20 million groups. Conversely, there were no statistically significant variances observed between cattle in the 10 and 15 million groups. Conclusions: Sperm at concentrations of 10, 15, 18 and 20 million per straw exhibited comparable motility, viability, and acrosomal membrane integrity. However, a concentration of at least 18 million sperm per straw is required to achieve a consistent rate of pregnancy rate in Hanwoo cattle after AI.

• 자원ㆍ환경경제연구
• /
• 제20권4호
• /
• pp.859-882
• /
• 2011

현 정부 출범 이후 에너지 자원 확보를 최우선 국정과제로 설정하고 과감한 투자와 함께 범정부적인 차원의 노력을 기울인 결과, 최근 들어 석유 가스 자주개발률이 큰 폭으로 증가하는 성과를 거두고 있다. 정부는 이러한 모멘텀을 이어갈 수 있도록 석유 자주개발률을 2019년에 25%까지 높여 석유자원의 안정적 공급 능력을 획기적으로 향상시킨다는 목표하에 다양한 지원 방안을 계획하고 있다. 이에 대해 본 연구에서는 정부가 설정한 자주개발률 목표를 달성하기 위한 정부지원금의 규모에 관심을 갖고 이를 계측할 수 있는 경제학적 모형을 설정하고, 이의 실증분석을 통해 개발목표율 설정에 따른 정부지원금의 크기를 추정하였다. 그 결과 2010년의 경우, 자주개발률 7.4% 달성을 위한 정부지원금의 규모는 약 2.68억 달러로 추정되었다. 그러나 국내 원유수요량이 증가해 10.2억 배럴 정도 전망되는 2019년의 경우, 정부지원금은 약 12.47억 달러로 추정되어 현재 수준의 4.7배 증가하는 것으로 나타난다. 그러므로 2019년까지 자주개발 25%의 목표달성을 위해 정부는 해외 석유개발사업에 대한 지원 규모를 대폭 확대하는 방안을 조속히 확정하고, 아울러 자금조달을 위한 단계별 계획을 구체적으로 설정함과 동시에 정부지원의 효율성을 높이기 위하여 현행 지원제도를 검토해 이를 재정비할 필요가 있다. 이를 위해 본 연구에서 사후지원제도(事後支援制度)의 하나로 예시하고 있는 자주개발물량에 대해 수입부과금 징수를 유예하는 방안도 고려해 볼 수 있을 것으로 생각된다.

• Fisheries and Aquatic Sciences
• /
• 제2권1호
• /
• pp.52-57
• /
• 1999

Air-drived rotating biological contactor (RBC) system, which is effective method in filtering performance, was tested for the nitrification capacity in a recirculating system. At ammonia concentrations between 0.029 and 0.528 mg/l, the effect of ammonia loading rate on ammonia removal rate at three different hydraulic loading rates could be defined by the following first­order regression models: Hydraulic loading rate of $14.8 m^3/m^3/day:\;y=39.2\times+3.4 (r^2=0.9137)$, Hydraulic loading rate of $26.5 m^3/m^3/day: y=53.3\times+4.0 (r^2=0.8686)$, Hydraulic loading rate of $37.3 m^3/m^3/day: y=58.4\times+4.2 (r^2=0.7755)$, where, $\times$ is ammonia loading rate (mg/l), y is ammonia removal rate $(g/m^3/day)$, The equations showed the optimal ammonia removal rate at the hydraulic loading rate of $26.5m^3/m^3/day$. Below the ammonia concentration of 2.72 mg/l, first-order regression models between ammonia loading rate and ammonia removal rate at three different rates of speed are defined as follows: Rotational speed of $0.75 rpm: y=28.5\times+4.7 (r^2=0.9143)$, Rotational speed of $1.0 rpm: y=33.6\times+8.4 (r^2=0.9534)$, Rotational speed of $2.0 rpm: y=28.9\times+3.6 (r^2=0.9488)$, where, x is ammonia loading rate (mg/l), y is ammonia removal rate $(g/m^3day)$. The equations show the ammonia removal rate at the rotational speed of 1.0 rpm is significantly higher than that at the rotational speed of either 0.75 rpm or 2.0 rpm (P<0.05).

• 한국해양공학회지
• /
• 제14권3호
• /
• pp.11-19
• /
• 2000

This study aims to examine the characteristics of the water quality variation in relation to the change of water exchange rate with respect to the development phases of the Pusan port. To clarify the characteristics, water exchange caused by the variations of coastline shape and water surface area was examined by the numerical experiments using the Lagrangian particle tracking model based on 2-D shallow water equation. As the results of numerical experiments, it was proved that the water exchange in the Pusan port was decreased mainly due to the port development and the breakwaters construction. During the port development phases from 1875 to 1998, 35% of the sea-space in the port had decreased to make hinterland spaces. This resulted in the loss of wet-land and coastline change as well as decrease of the water exchange rate at the sea side. The city population in that period had rapidly increased from several thousands to 4 millions, resulting in the large discharge of sewages into the port area. Under the these environmental conditions, it can be clearly said that the water quality in the Pusan port is sensitively affected by the discharge of urban sewages decrease of the water exchange rate in relation to port and urban developments. In the study, the temporal changes of water quality were discussed with respect to the port development phases. It was clear that the water quality wad controlled by the exchange rate change under the port development as well as the input impact into the port from the urbanized city area. To make clean sea of the Pusan port, it is suggested that the sewage control, the water exchange and coastline control should be systematically checked under the concept of eco-friendly development and environmental management.

• 드라이브 ㆍ 컨트롤
• /
• 제21권2호
• /
• pp.30-35
• /
• 2024

Domestic rice is more expensive than imported products, so it is necessary to reduce production costs to secure competitiveness. Low-density planting developed in Japan is a cultivation technology that reduces labor and production costs without yield loss. The area of low-density cultivation is continuously increasing. However, research on how rice transplanters adapt to low-density planting has not been conducted. Therefore, this study was carried out to determine the optimal working conditions of a rice transplanter for low-density planting. Three types of rice transplanters were used and treated based on 3 conveying distance levels. The number of picked seedlings, pick missing rate, the number of planted seedlings, and the mis-planted rate were investigated to evaluate planting accuracy according to the transfer distance to the seedling tray. The results showed that the number of planted seedlings was 4.31~4.95 EA with an L1 seedling tray transfer distance (horizontal 9 mm, vertical 8 mm), but the mis-planted rate was higher than in other conditions. At L2 (horizontal 9 mm, vertical 10 mm) and L3 (horizontal 11 mm, vertical 8 mm) transfer distance conditions, the number of planted seedlings were 4.89-5.68 EA and 4.69-5.66 EA, respectively, with a low mis-planted rate of less than 3%. The results showed that if the transfer distance is adjusted properly, a rice transplanter can be used for low-density planting with high planting accuracy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.381.2-381.2
• /
• 2014

In this study the amorphous carbon films were deposited by PECVD at the substrate temperature range of 250 to $600^{\circ}C$, and the process conditions of higher and lower precursor flow rate, respectively. The temperature was a main parameter to control the density and mirco-structures of carbon films, and their's properties depended with the process temperatrue are changed by controlling precursor flow rate. The precursor feeding rate affect on the plasma ion density and a deposition reactivity. This change of film properties was obtained the instrinsic stress, FT-IR & Raman analysis, refractive index (RI) and ext. coef. (k) measured by ellipsometer. In the process conditions of lower and higher flow rate of precursor it had a different intrinsic stress as a function of the substrate temperature.