• 농촌지도와개발
• /
• 제17권3호
• /
• pp.607-637
• /
• 2010

The goal of this study is to develop a skill system for the areas of agriculture, forestry and fisheries among the skill frameworks that require basic examination in the development of skill standards. More specifically, the study aims to classify skills in the areas of agriculture, forestry and fisheries and to develop respective skill level. We classified skills and created the skill level through a study of documents, interview with experts and in-depth discussions with expert group centering on terminologies commonly used in the industrial settings. As a result of skill classification, we were able to classify skills into four categories in medium-scale classification, 13 categories in small-scale classification, and again into total 42 categories. We classified the skill level in the areas of agriculture, forestry and fisheries into 8 stages. Based on the skill system, we provided definition of skill and skill group, definition of each different skill, and performance standard by skill and level.

• 산업공학
• /
• 제24권4호
• /
• pp.435-446
• /
• 2011

Performance measures play a critical role in formulating mail delivery strategies and evaluating actual results. Nevertheless, the existing method and corresponding system to determine the standard workloads of mailmen is developed without careful consideration of real delivery environments and various requirements of mailmen. Hence, the current system is insufficient for optimal management of workloads and shows substantial gaps when compared to the results of actual work-site. This study considers how to improve the current workload management system of mailmen. We first performed the as-is analysis of the mail delivery service and then developed a prototype of advanced delivery workload management system. The to-be system consists of five subsystems which can be grouped into three categories; master data management, workloads management, performance analysis. Our results can be a valuable guide for the development of real system for measuring and balancing the workloads of mailmen.

• ETRI Journal
• /
• 제31권4호
• /
• pp.376-386
• /
• 2009

An active radio frequency identification (RFID) system has the advantages of a long identification distance and a good identification rate, overcoming passive RFID drawbacks. Therefore, interest in the development of active RFID systems has been gradually increasing in areas of harbor logistics and national defense. However, some identification failures between active RFID systems developed under the same standards have been reported, presumably due to a lack of development of accurate evaluation methods and test equipment. We present a realization of the hardware and software of an emulator to evaluate the standard conformance of an active RFID system in a fully anechoic chamber. The performance levels of the designed emulator are analyzed using Matlab/Simulink simulations, and the applicability of the emulator is verified by evaluating the standard conformance of a real active RFID tag. Finally, we propose a new evaluation method by incorporating a self-running test mode environment into the RFID tags to reduce testing time and increase testing accuracy. The application of the suggested method to actual tags improves measurement uncertainty by 0.56 dB over that obtained using existing methods.

• 인터넷정보학회논문지
• /
• 제20권3호
• /
• pp.69-75
• /
• 2019

The safety and performance of medical device software is managed through life-cycle processes, which represent the entire process of research and development (R&D). The life-cycle process of medical device software is represented by an international standard called IEC 62304, ISO/IEC 12207. In order to license the product, the manufacturer must have document artifacts that comply with the IEC 62304 standard. However, these standards only describe the content of the activity and do not provide a method or procedure for documentation. Therefore, this paper suggests R&D documentation guidelines that assist medical device software developers to have R&D documents conforming to the standards. For this purpose, this study identifies the requirements related to documentation among the requirements existing in the standard and extracts them in the form of guidelines showing only the core information of the requirements. In addition, through the Web framework implemented based on this research, the developer can evaluate whether the technical documents are written in accordance with the R&D document guidelines. Medical device software manufacturers can efficiently produce high-quality research and development documents through R&D documentation guidelines, and they can have standards-compliantresearch and development documentation required for licensing procedures.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.91-97
• /
• 2016

PURPOSES : The objective of this paper is to develop a pavement performance model based on the Bayesian algorithm, and compare the measured and predicted performance data. METHODS : In this paper, several pavement types such as SMA (stone mastic asphalt), PSMA (polymer-modified stone mastic asphalt), PMA (polymer-modified asphalt), SBS (styrene-butadiene-styrene) modified asphalt, and DGA (dense-graded asphalt) are modeled in terms of the performance evaluation of pavement structures, using the Bayesian algorithm. RESULTS : From case studies related to the performance model development, the statistical parameters of the mean value and standard deviation can be obtained through the Bayesian algorithm, using the initial performance data of two different pavement cases. Furthermore, an accurate performance model can be developed, based on the comparison between the measured and predicted performance data. CONCLUSIONS : Based on the results of the case studies, it is concluded that the determined coefficients of the nonlinear performance models can be used to accurately predict the long-term performance behaviors of DGA and modified asphalt concrete pavements. In addition, the developed models were evaluated through comparison studies between the initial measurement and prediction data, as well as between the final measurement and prediction data. In the model development, the initial measured data were used.

• Mass Spectrometry Letters
• /
• 제9권3호
• /
• pp.77-80
• /
• 2018

The focus of this paper is to present techniques to overcome certain difficulties in quantitative analysis with a time-of-flight mass spectrometer (TOF-MS). The method is based on conventional solid-phase extraction, followed by reversed-phase ultra high performance liquid chromatography of the extract, and mass spectrometric analysis. The target compounds included atenolol, atrazine, caffeine, carbamazepine, diclofenac, estrone, ibuprofen, naproxen, simazine, sucralose, sulfamethoxazole, and triclosan. The matrix effects caused by high concentrations of organic compounds in wastewater are especially significant in electrospray ionization mass spectroscopy. Internal-standard calibration with isotopically labeled standards corrects the results for many matrix effects, but some peculiarities were observed. The problems encountered in quantitation of carbamazepine and triclosan, due to nonlinear calibration were solved by changing the internal standard and using a narrower mass window. With simazine, the use of a quadratic calibration curve was the best solution.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.18-26
• /
• 2012

Recently, there have been suggestions that power factor should be considered to increase the efficiency of electric power supply when evaluating the performance of the electric appliances in standby mode and the related studies have been conducted to improve the efficiency standard of standby power. But, they lack the analysis of the standby power characteristics with the changes of power factor. This study is conducted to analyze the standby power characteristics of TV which is a typical home appliance and reaches a conclusion that the apparent power can be a more reasonable index which reflects the efficiency of electric power supply. It is also found that LED TVs show the best performance in standby mode. Moreover, an example to set standby power standards on TVs to be applied in the future is suggested, considering the energy efficiency policies for appliances.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.19-32
• /
• 2021

In the present experimental study, the high performance hybrid fiber reinforced concrete (HPHFRC) is prepared using the Modified Andreasen and Andersen (A&A) particle packing model. Total of 16 trial mixes of HPHFRC with Indian standard sand (SS) and natural river sand (NS) are prepared to achieve the selection criteria (flow percent>150 and compressive strength>80 MPa). Based on the flow percent and compressive strength criteria, the selected mixes evaluated to study the effect of usage of natural river sand (NS) and the expensive Indian standard sand (SS) on the mechanical, durability, and microstructure property of designed HPHFRC. It has been found that the Modified A&A model is reliable to design the mix for HPHFRC with excellent mechanical, durability, and microstructure properties. In addition to that, a moderate difference in the mechanical and durability properties of NS contained HPHFRC and SS contained HPHFRC is found. Based on the obtained results of NS contained HPHFRC, it can be concluded that the use of natural river sand (NS) can be successfully adopted for the production of HPHFRC, resulted in a reduction of the production cost without compromising the excellent performance of HPHFRC.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.117-126
• /
• 2005

Korean Standard Certificate, suitable for the korean industrial standards is one which was designed not only to spread and utilize the industrial standard established for the industrial standardization, but to protect the consumer. In this study, the practical effects of the Korean Standard Certificate will be examined in various fields, based on the small medium enterprises which achieved the KS Certificate. In order to look into how the system has effects on the performance of the management in a company, the method of the actual approach will be used. In the end, the purpose of this study is to find the plan in which KS Certificate can be helpful to the development of the company.

• 대한공업교육학회지
• /
• 제33권1호
• /
• pp.92-113
• /
• 2008

이 연구의 목적은 공업고등학교 공작기계 과목의 CNC 선반 실습 표준 수행 평가를 위한 기준을 개발하는 데 있다. 이 연구에서는 CNC 선반 실습을 실시하고 있는 경기도내 13개 공업고등학교(공립 11개교와 사립 2개교)의 CNC 선반 수행 평가 기준을 수집, 분석하여 CNC 선반 실습 표준 수행 평가 기준을 개발 하였다. 경기도내 13개 공업고등학교에서 조사하여 작성한 CNC 선반 실습 표준 수행 평가 기준을 CNC 선반 실습 현장 교사 26명(각 학교별 2명씩)에게 타당성을 검증 받았다. 그 검증값은 평균 3.77 ~ 4.77로 타당도가 매우 높은 것으로 나타났다. 이 연구에서 개발한 평가 도구의 특징은 다음과 같다. 첫째, 공업고등학교 학생들의 CNC 선반 실습에 대한 기능적인 영역뿐만 아니라 인지적 영역, 정의적 영역까지를 평가할 수 있도록 평가 기준을 개발하였다. 둘째, CNC 선반 실습 교과에 대한 평가 영역을 전 실습 과정에 대하여 세분화 하였으며, 교사와 학생이 함께 평가할 수 있는 객관적 평가 방법을 택하였다. 셋째, 개발된 CNC 선반 실습 표준 수행 평가 기준은 일선 현장에서 지도하고 있는 교사들로부터 타당성을 검증 받았기 때문에 타당도와 신뢰도가 높다고 할 수 있다.