• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.23-29
• /
• 2024

Potatoes are one of the world's four major crops, and domestic consumption is currently increasing in Korea. However, the mechanization rate of potatoes is very low, and especially, harvesting is the most labor-intensive task in potato production. In Korea, potato-collecting work depends on manpower, so it is necessary to develop a gathering-type harvester that can be used for processes from digging to harvesting. Therefore, in this study, a self-propelled-type potato harvester was developed, and its performance was analyzed to mechanize harvesting. The potato harvester was developed to have a crawler-type driving part with a 60 hp diesel engine and consisted of a digging part that digs potatoes from the ground, a vertical transporting part that transfers the dug potatoes to the height of the collection bag, a separating part that separates debris, such as stones and soil, and a collecting part that loads the collection box. A field test of the potato harvester was conducted, and performance was evaluated by the damage, loss, and debris mixing proportions, which were 2.5%, 2.8%, and 2.6%, respectively. The working capacity was 1.2 h/10 a. The economic analysis results showed that the cost of harvesting work could be reduced by 12.7% compared to manual harvesting.

• Journal of the Korean housing association
• /
• v.18 no.5
• /
• pp.143-150
• /
• 2007

The purpose of this research is to example the general trend of the service environment evaluation of the silver town and classify based on the service environment evaluation to suggest a effective method and alternatives fur development companies. The survey population of this study focused on 40s and 50s' middle aged both genders living in the Seoul and national capital region, we used random sampling method. The analytical methods used in this study were frequency, mean, standard deviation, factor analysis, Chi-Squae analysis, ANOVA, cluster Analysis, post-hoc estimation (Duncan test), To verify the reliability of each measure, Cronbach's alpha coefficient was used. As a result of classifying the environment evaluation elements, it was classified into 5 groups for the differentiating strategy on each group. The groups are: life support service type, medical and health support service type, cultural support service type, indifference type, and food support service type.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.64-70
• /
• 2023

Garlic is classified as one of the three essential seasoning vegetables in Korea. In 2023, it was reported that the area under garlic cultivation was 24,700 ha, and the production stood at 318,220 tons. Garlic harvesting mechanization currently stands at 43.8%, and garlic is still collected manually after digging out using diggers, so the process is labor intensive. To reduce garlic production costs and enhance competitiveness, it is necessary to develop a high-performance gathering type harvester in place of the digging type harvester. Therefore, in this study, a gathering-type garlic harvester that can dig and collect simultaneously was designed and manufactured, and the harvest performance by factor was analyzed through a harvest performance test. As a result of the performance test, it was analyzed to perform optimally at a driving speed of 0.11m/s and a transfer speed of 85rpm. Work performance was calculated using the results obtained from the factor performance test.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.381-386
• /
• 1999

In machining with cutting tool inserts having complex chip groove shape, the flow, curl and breaking patterns of the chip are different than in flat-face type inserts. In the present work, an effort is made to understand the three basic phenomena occurring in a chip since its formation in machining with groove type and pattern type inserts. These are the initial chip flow, the subsequent development of up and side curl and the final chip breaking due to the development of torsional and banding stresses. In this paper, chip flow angle in a groove type and pattern type inserts. The expression for chip flow angle in groove type and pattern type insets is also verified experimentally using high speed filming techniques.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.185-192
• /
• 2012

It is the concept of this paper to build up the convergence type of the total class service system, and the goal is to develop the education services, which are differentiated from existing digital textbooks and development tools. We establish developmental programs and convergence strategies from market analyses related to apps and digital education. Then this paper proposes 'E-Class Author Service System (ECA)' as an education service system based on the tablet PC. It is the convergence system of the app type of textbook development tool and class management system. Teachers can produce and develop class materials and textbooks using the app type of textbook development tool in ECA service system. They can also add necessary functions from the class management system for efficient class progress. ECA improves the interaction and communication between a teacher, student and parents in the sever-based network. This study expects that ECA will achieve prior occupation of the app market as an educational app development tool and reduce private education expenses.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.220-223
• /
• 2002

This paper introduces the development procedure of paddle type small-scaled composite rotor blade for helicopter hingeless rotor system. Paddle type composite blade design was done by using CORDAS program developed by KARI and dynamic analysis for hingeless hub with blade is done by using FLIGHTLAB which is commercial software for helicopter comprehensive analysis. The procedure to manufacture complicated shape of paddle type blade tip was developed and composite blades were manufactured after establishing the effective curing method. Through this research, the development technology of composite rotor blade with complex aerodynamic shape were accumulated and these will be applied to the related research field, for example, full size composite blade development, etc.

• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.3
• /
• pp.67-74
• /
• 2006

The purpose of this paper is to find out and discuss methods of development applicable in rural agricultural area. It is expected that rural economy will decrease in the future because of the structural problems of agricultural economy itself. The demands of rural communities for an improvement in the living standards should continue to increase but the present living environments remain poor and are at a relatively low level. This investigation focuses on the analysis of development types in rural areas in Japan. Various methods of development must be used considering specific features of each rural village. The village people's participation must be needed for success of certain methods of development. An example is the type of greentourism and type of exchange between the urban and the rural areas. Other types of development require enormous expense for construction of facilities. Various strategies and methods of development are needed in rural agricutural area in Korea. The simple method of development that is widely used currently is not really helpful to the development of rural agricultural economy.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.414-423
• /
• 2015

Fishing trend and characteristics of Korean tuna purse seine fishery in the Pacific Ocean were investigated using logbook data compiled from captain onboard and the statistical data from 1980 to 2013. The historical catch of this fishery had sharply increased since mid-1980s, and it has shown fluctuations with about 2-3 hundred thousands, whereas the catch per number of vessel has steadily increased with fluctuations since commencing this fishery. As for the proportion of catch by set type, unassociated type had increased from the mid-1980s to the end of 1990s, and then has decreased up to 2010s. Associated type had decreased continually to the end of 1990s, however, it started to increase since the beginning of 2000s. As for the catch proportion of set type by main species, those of skipjack tuna and bigeye tuna showed higher in the associated type, whereas that of yellowfin tuna has the highest proportion in the unassociated type. Fishing distribution of Korean tuna purse seine fishery was concentrated on the area of $5^{\circ}N{\sim}10^{\circ}S$ and $140^{\circ}E{\sim}180^{\circ}$ through the decades. The monthly catch distribution by longitudinal zone of Korean tuna purse seine fishery expanded the most further to the eastward in September to October.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.241-247
• /
• 2005

The aim of this study was to develop a trawl escapement device which can improve the survival rate of young fishes passed through trawl codend. The sea experiments according to the bar space of the device and bar materials were carried out to decide the bar space and device materials in Korean southern sea and off Cheju island. Stainless pipes and MC bars were used to test the efficiency of escapement device materials. Although escapement rates of MC bar for main species were a little higher compare with stainless pipe, the efficiency of device for stainless pipe was better than MC bar. Escapement devices of sort-K type and grid panel type were also compared. Escapement rates of redlip croaker(Pseudosciaena polyactis), blackthroat seaperch(Doederleinia berycoides) and finespotted flounder (Pleuronichthys cornutus) showed 61.7%, 2.0% and 2.7% on the sort-x type and 69.9%, 1.1% and 2.0% for the grid panel type but the difference was little. Fishes under 20mm head width and fishes which swimming speed is so slow compared with body length could not go through well the device. Escapement rates according to the bar space were estimated using grid panel type. The rates of redlip croaker(Pseudosciaena polyactis) for the bar space of 20mm, 25mm, 35mm were increased as 60.3%, 61.0% and 77.8%, and 9.8%, 16.4% and 45.6% for horse mackere1(Trachurus japonicus), respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1750-1759
• /
• 2009

Recently from the enterprise when about reduction the product of numerous type to develop does not produce simultaneously with Life Cycle shortening and JIT productions of the product, is confronting in the environment which will not become. In order to confront in like this environment, developing the good product importance but, the product researches what kind of direction and developing with core subject of technical innovation is recognized. For the development method and an investment direction of the product proposed PPM (Product Portfolio Management) algorithms from the research which sees from like this viewpoint. With PPM algorithms which are proposed, divided the product in 6 kind groups of standardization type, discrimination type, material cost investigation type, processing cost investigation type and sale promotion type and abolition type and presented tyresearch and development direction..Research approach portfolio investigation of existing research and consulting experience of research and development field with background, presented the analytical model of algorithm, is applied of the instance which composed.