• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.293-298
• /
• 2005

The purpose of this study was the development of a multi-joint robot manipulator for milking robot system. The multi-joint robot manipulator was controlled by 5 drivers with driver controller through the position information obtained from the image processing system. The robot manipulator to automatically attach each teat cup to the teats of a milking cow was developed and it's motion was accurately measured with error rate. Results were as follows. 1. Maximum errors in position accuracy were 4mm along X-axis, 4.5mm along Y-axis and 0.9mm along Z-axis. Absolute distance errors were maximum 4.8mm, minimum 2.7mm, and average 3.6mm. 2. Errors of repeatability were maximum 3.0mm along X-axis, 3.0mm along Y-axis, and 0.5mm along Z-axis. Distance error values were maximum 3.2mm, minimum 2.2mm, and average 2.5mm. It is envisaged that multi-joint robot manipulator can be applicate to milking robot system being developed in consideration of the experiment results.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.51-58
• /
• 2004

This paper describes the development of a small 6-axis force/moment sensor for robot's finger, which measures farces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously. In order to safely grasp an unknown object using the robot's gripper, and accurately perceive the position of it in the gripper, it should measure the force in the gripping direction, the force in the gravity direction and the moments each direction, and perform the force control using the measured forces and moments. Also, it should detect the moments Mx (x-direction moment), My and Mz to accurately perceive the position of the object in the grippers. Thus, the robot's gripper should be composed of 6-axis force/moment sensor that can measure forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously. In this paper, the small 6-axis force/moment sensor for measuring forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously was newly modeled using several parallel-plate beams, designed, and fabricated. The characteristic test for the developed sensor was performed, and the result shows that intereference errors of the developed sensor are less than 4.23％. Thus, the developed small 6-axis force/moment sensor may be used a robot's gripper.

• 한국환경복원기술학회지
• /
• 제6권5호
• /
• pp.70-78
• /
• 2003

From the viewpoint of the importance of the division theory based on topography(pyungsu) derived from the uniqueness in topography, not to mention of the function of ridge in ruban areas, the destroy of ridges should be prevented from the development of hill areas. This study intends to propose the basic concepts and principles to protect the ridge axis with green in open space and landscape planning. The main results are summarized as follows : First, eco-bridge across the ridges will be connected for the purpose of ecosystem restoration. Second, the protection and restoration of green ridge axis can be completed by Green Structure Plan which has principles and standards such as. - layout of development axis and establishment of rules on preservation - the practical use of various preservation methods and the standards suitable to the methods - laying down the standards of restoration according to the height from ground level - the application of zoning such as height district and urban design for preservation Finally, the design of implementation tools must be needed for protection and restoration.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.245-246
• /
• 2006

For developing 5-axis laser cutting systems, many problems such as rotating of laser head or table, 5-axis tool path generation and collision avoidance between laser head and product should be solved. In this paper, a five-axis laser cutting machine with table swivel and rotary type configuration is developed. The five axes (X,Y,Z,A,B) are controlled and interfaced to PC via MMC board. Two kinds of CAM S/W such as commercial 5-axis CAM S/W(Euclid) and UG-API are engaged to generate NC code for the developed 5-axis laser cutting machine.

• 센서학회지
• /
• 제23권2호
• /
• pp.127-133
• /
• 2014

This paper describes a design and manufacture of a two-axis force sensor and a single-axis force sensor for the fingers of an intelligent robot's hand. The robot's finger is composed of a two-axis force sensor, a first knuckle, a single-axis force sensor, a second knuckle, a spring, a motor of first knuckle, a motor of second knuckle, and so on. The two-axis force sensor attached to the first knuckle and the single-axis force sensor attached to the second knuckle were designed and manufactured, and the characteristics test of two sensors was carried out. As a test results, the interference error of the two-axis force sensor was less than 0.68%, the repeatability error of each sensor was less than 0.02%, and then the non-linearity was less than 0.03%. It is thought that the sensors can be used for the fingers of the intelligent robot's hand for rehabilitation exercise of finger patients.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.711-714
• /
• 2001

As the life cycle of the vehicle become shorter, the method that reduce the development time of new model become more important. In this reason, the development of the simulator that provides similar environment with the actual vehicle road characteristics is increasing. In this paper, the multi-axis simulator is designed and analyzed by kinematic method. The simulator has a function simulating the 3 load elements; vertical, longitudinal, and lateral force respectively and simultaneously. The result of this paper can be used for developing the multi-axis simulator linkage.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.311-314
• /
• 1997

According to the development of industrial equipment such as semiconductor manufacturing machines, optical device, and precision machine tool, a high-precision translation system with wide range has been required. This paper describes a high-precision 2-axis translation system, which consists of microstage and global stage. In order to achieve the highresolution in the long range, some engineering techniques are used. Three linear guides with flexible coupling are adopted to reduce the motor vibration in the global stage. A simple elastic hinge structure activated by five PZT is applied to reduce the angular dev~atlon. As the result of combination of microstage and global stage associated with some engineering techniques, the 2-axis translation system can measure the 200 X 200 mrn range with the nanometer accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.243-244
• /
• 2006

In this paper, the development of an error measurement system of 5-axis mill & turn machine tool presented by double ball bar test, which has been widely used to measure the overall accuracy of machining center. and the reliability of an error measurement system of 5-axis mill & turn machine tool was secured by the direct cutting test.

• 센서학회지
• /
• 제21권2호
• /
• pp.127-134
• /
• 2012

Stroke patients must do the rehabilitation exercise to recover their fingers' function using a rehabilitation robot. But the rehabilitation robots mostly have not the force sensors to control the applied force to each finger. Thus, in this paper, the development of a force sensor for thumb rehabilitation robot and four two-axis force sensors for four-finger rehabilitation robot were developed. The force sensor and four two-axis force sensors could be used to measure the applied force to each finger, and the forces could be used to control the applied forces to each sensor in rehabilitation exercise using in the rehabilitation robot. The developed sensors have non-linearlity error of less than 0.05 %, repeatability error of less than 0.03 %, and the interference error of two-axis force sensor is less than 0.2 %.

• 한국산업융합학회 논문집
• /
• 제25권6_1호
• /
• pp.953-959
• /
• 2022

In this paper, the design result of robotic tools and the development of robot control system for chemical coupler assembly are presented. This research aims to eliminate the risk of chemicals exposed to human operators by developing the robotic tools and robot automation system for chemical tank lorry unloading that were done manually. Due to tight tolerance between couplers, even small pose error may result in very large internal force. In order to resolve the problem, the 6-axis compliance device is employed, which can provide not only enough compliance between couplers but also F/T sensing. The 6-axis compliance device having large force and moment capacity is designed. A simple linear gripper with rack-and-pinion is designed to grasp two sizes of couplers. The proposed robot automation system consists of 6-DOF collaborative robot with offset wrist, 6-axis compliance device with F/T sensing, linear gripper, and two robot visions.