• 대한약침학회지
• /
• 제23권2호
• /
• pp.71-78
• /
• 2020

Objectives: This study was conducted to development of hazardous materials management standards for the decoction type of personalized herbal medicines (PHMs). Methods: This study was conducted in two stages. We searched documents about criteria to use words such as 'Herb', 'Herbal medicine', and 'Botanical Drug' and summarized the results. We organized the committee consisted of seven experts, and held two meetings to reach an agreement on hazardous management standards of the decoction type of PHMs. Results: The seven documents were presented in the literature review and six items related to hazardous management standards of decoction were identified. The second expert meeting brought that a total of six items, including heavy metal, pesticide residues, sulfur dioxide, benzopyrene, mycotoxin, and micro-organism limits, were selected for safety management of decoction type of PHMs. Also, the criteria and test methods for each standard were suggested for monitoring the decoction type of PHMs. Conclusion: The study suggested hazardous material management standards and criteria for the decoction types of PHMs. In the future, it would be necessary to conduct a pilot test to ensure the validity and credibility of the safety management standard and criteria. Furthermore, the government level safety management system should be introduced to verify the safety of decoction medicines.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.314-314
• /
• 2022

In the production of rice flour, wet milling is a method of milling rice after soaking it in water, and it takes a lot of time and cost from milling to drying. To overcome this problem, the floury type rice was developed for dry milling and it is known to have round starch granules, low content of damaged starch after milling, and a starch structure similar to wheat. Because of its unique properties different from normal rice, it is necessary to research on processing and characteristics of floury-type rice to expand its utility in the food industry. Therefore, this study aimed to prepare the pregelatinized floury type rice (Baromi2) by autoclave and investigate their physicochemical properties. As the heat treatment time increased, the brightness decreased from 83.8 to 76.8, however, both redness and yellowness increased from 0.57 to 4.5 and from 14.58 to 21.13, respectively. Despite of same treatment time, soaking in water (10 min) before autoclaving increased the solubility and swelling power of Baromi2 over 2 times. The peak viscosity of native Baromi2 was over 2000 RVU, on the other hand, there was a significantly decrease to less than 1000 RVU of pregelatinized Baromi2. Heat treatment without immersion caused partial gelatinization of starch, resulting that some starch granules maintaining their integrity. Whereas there were no starch granules in heat treatment with soaking in water due to complete gelatinization. This study would be helpful to the suggestion of using heat-treated floury-type rice as an intermediate material in the food industry in the future.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.64-70
• /
• 2023

Garlic is classified as one of the three essential seasoning vegetables in Korea. In 2023, it was reported that the area under garlic cultivation was 24,700 ha, and the production stood at 318,220 tons. Garlic harvesting mechanization currently stands at 43.8%, and garlic is still collected manually after digging out using diggers, so the process is labor intensive. To reduce garlic production costs and enhance competitiveness, it is necessary to develop a high-performance gathering type harvester in place of the digging type harvester. Therefore, in this study, a gathering-type garlic harvester that can dig and collect simultaneously was designed and manufactured, and the harvest performance by factor was analyzed through a harvest performance test. As a result of the performance test, it was analyzed to perform optimally at a driving speed of 0.11m/s and a transfer speed of 85rpm. Work performance was calculated using the results obtained from the factor performance test.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.185-192
• /
• 2012

It is the concept of this paper to build up the convergence type of the total class service system, and the goal is to develop the education services, which are differentiated from existing digital textbooks and development tools. We establish developmental programs and convergence strategies from market analyses related to apps and digital education. Then this paper proposes 'E-Class Author Service System (ECA)' as an education service system based on the tablet PC. It is the convergence system of the app type of textbook development tool and class management system. Teachers can produce and develop class materials and textbooks using the app type of textbook development tool in ECA service system. They can also add necessary functions from the class management system for efficient class progress. ECA improves the interaction and communication between a teacher, student and parents in the sever-based network. This study expects that ECA will achieve prior occupation of the app market as an educational app development tool and reduce private education expenses.

• 수산해양기술연구
• /
• 제51권3호
• /
• pp.414-423
• /
• 2015

Fishing trend and characteristics of Korean tuna purse seine fishery in the Pacific Ocean were investigated using logbook data compiled from captain onboard and the statistical data from 1980 to 2013. The historical catch of this fishery had sharply increased since mid-1980s, and it has shown fluctuations with about 2-3 hundred thousands, whereas the catch per number of vessel has steadily increased with fluctuations since commencing this fishery. As for the proportion of catch by set type, unassociated type had increased from the mid-1980s to the end of 1990s, and then has decreased up to 2010s. Associated type had decreased continually to the end of 1990s, however, it started to increase since the beginning of 2000s. As for the catch proportion of set type by main species, those of skipjack tuna and bigeye tuna showed higher in the associated type, whereas that of yellowfin tuna has the highest proportion in the unassociated type. Fishing distribution of Korean tuna purse seine fishery was concentrated on the area of $5^{\circ}N{\sim}10^{\circ}S$ and $140^{\circ}E{\sim}180^{\circ}$ through the decades. The monthly catch distribution by longitudinal zone of Korean tuna purse seine fishery expanded the most further to the eastward in September to October.

• 한국농촌건축학회논문집
• /
• 제8권3호
• /
• pp.67-74
• /
• 2006

The purpose of this paper is to find out and discuss methods of development applicable in rural agricultural area. It is expected that rural economy will decrease in the future because of the structural problems of agricultural economy itself. The demands of rural communities for an improvement in the living standards should continue to increase but the present living environments remain poor and are at a relatively low level. This investigation focuses on the analysis of development types in rural areas in Japan. Various methods of development must be used considering specific features of each rural village. The village people's participation must be needed for success of certain methods of development. An example is the type of greentourism and type of exchange between the urban and the rural areas. Other types of development require enormous expense for construction of facilities. Various strategies and methods of development are needed in rural agricutural area in Korea. The simple method of development that is widely used currently is not really helpful to the development of rural agricultural economy.

• 수산해양기술연구
• /
• 제41권4호
• /
• pp.241-247
• /
• 2005

The aim of this study was to develop a trawl escapement device which can improve the survival rate of young fishes passed through trawl codend. The sea experiments according to the bar space of the device and bar materials were carried out to decide the bar space and device materials in Korean southern sea and off Cheju island. Stainless pipes and MC bars were used to test the efficiency of escapement device materials. Although escapement rates of MC bar for main species were a little higher compare with stainless pipe, the efficiency of device for stainless pipe was better than MC bar. Escapement devices of sort-K type and grid panel type were also compared. Escapement rates of redlip croaker(Pseudosciaena polyactis), blackthroat seaperch(Doederleinia berycoides) and finespotted flounder (Pleuronichthys cornutus) showed 61.7%, 2.0% and 2.7% on the sort-x type and 69.9%, 1.1% and 2.0% for the grid panel type but the difference was little. Fishes under 20mm head width and fishes which swimming speed is so slow compared with body length could not go through well the device. Escapement rates according to the bar space were estimated using grid panel type. The rates of redlip croaker(Pseudosciaena polyactis) for the bar space of 20mm, 25mm, 35mm were increased as 60.3%, 61.0% and 77.8%, and 9.8%, 16.4% and 45.6% for horse mackere1(Trachurus japonicus), respectively.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1750-1759
• /
• 2009

최근 기업에서는 제품의 Life Cycle 단축과 다품종소량 생산으로 인하여 수많은 종류의 제품을 동시에 개발하고 생산하지 않으면 안 될 환경에 직면해 있다. 이러한 환경에 대응하기 위해, 좋은 제품을 개발하는 것도 중요하지만, 제품을 어떠한 방향을 연구하고 개발할 것인가는 기술혁신의 핵심과제로 인식되고 있다. 이러한 관점에서 본 연구에서는 제품의 개발 방법과 투자 방향을 결정하기 위하여 PPM (Product Portfolio Management) 알고리즘을 제안하였다. 제안된 PPM 알고리즘 분석으로 제품을 표준화형, 차별화형, 재료비검토형, 가공비검토형, 판매촉진형, 폐지형의 6가지 그룹으로 나누어 연구 개발 방향을 제시하였다. 연구 방법은 기존 연구의 포트폴리오 고찰과 R&D분야의 컨설팅 경험을 바탕으로, 알고리즘의 분석 모형을 제시하고, 적용 사례로 구성하였다.

• Current Photovoltaic Research
• /
• 제1권1호
• /
• pp.17-26
• /
• 2013

In contrast to conventional crystalline cells, back-contact solar cells feature high efficiencies, simpler module assembly, and better aesthetics. The highest commercialized cell and module efficiency was recorded by n-type back-contact solar cells. However, the mainstream PV industry uses a p-type substrate instead of n-type due to the high costs and complexity of the manufacturing processes in the case of the latter. P-type back-contact solar cells such as metal wrap-through and emitter wrap-through, which are inexpensive and compatible with the current PV industry, have consequently been developed. In this paper the characteristics of EWT (emitter wrap-through) solar cells and their status and prospects for development are discussed.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.96-101
• /
• 2000

In machining with cutting tool inserts having complex chip groove shape the flow curl and breaking pattern of the chip are different than in flat-face inserts. In the present work an effort is made to understand the three basic phe-nomena occurring in a chip since its formation in machining with groove type and pattern type inserts. These are the ini-tial chip flow the subsequent development of up and side curl and the final chip breaking due to the development of tor-sional and bending stresses. in this paper chip flow angle in a groove type and pattern type inserts. The expres-sion for chip flow angle in groove type and pattern type inserts is also verified experimentally using high speed filming techniques.