• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.592-595
• /
• 2004

This paper presents a study on the development of a multi-sensing inertial sensor with a single mechanical structure, which can be used both as a gyroscope and an accelerometer. The proposed MEMS gyro-accelerometer is designed to detect the angular rate and the acceleration at the same time using two separate detection circuits for one proof mass. In this study, the detection and signal processing circuit for an effective signal processing of different inertial measurements is designed, fabricated, and tested. The experimental results show that the performances of the gyro-accelerometer have resolutions of 1mg and 0.025deg/sec and nonlinearities of less than 0.5% for the accelerometer and the gyroscope, respectively, which are similar results with those of sensors with different structures and different detection circuits. The size of the sensor is reduced almost by 50% comparing with the sensors of separated proof mass.

• 한국CDE학회논문집
• /
• 제20권3호
• /
• pp.221-229
• /
• 2015

M&S (Modeling & Simulation) based design is widely accepted for the development of the future weapon system with better performance in a cheaper and faster way. Integrated simulation environment (ISE) is needed for the M&S based design. On the ISE, system engineers can not only verify design options but also validate system requirements. In this paper, we propose architectural models of the integrated simulation environment (ISE) which incorporates mission effectiveness M&S (Modeling & Simulation), system performance M&S, the optimization model of integrated performances, digital mockup and virtual prototype. The ISE architectural models may be used to implement the ISE for the development of the future unmanned ground combat vehicle.

• 농촌지도와개발
• /
• 제25권2호
• /
• pp.85-97
• /
• 2018

This study aims to investigate the farmer's educational performances Influencing educational satisfaction. In general, the goal of agricultural education is to increase farm performance such as income, sales and perceptions. A survey was used to collect data from 588 farmers to the country extension office. The results of the analysis are as follows. The variables that have a significant effect on satisfaction in this study are as follows. interaction between instructors and farmers, passion of instructors, effectiveness of lectures, educational support, and educational facilities. However, the adequacy of the lecture and the diversity of the contents of education did not explain the satisfaction variable. Discussions on the improvement of farmers' education were made by considering the rejected variables. In conclusion, farmers' education in the field should secure educational diversity. And farmer's education in RDA should develop a new curriculum. Farmer's education in RDA should further strengthen the informal learning.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.239-240
• /
• 2013

The increased demand for conventional energy sources, and international oil price rises are driving societies toward research and development of renewable energy. A large number of their installations and penetrations will bring an instability distribution power system. Also, load concentration problem at specific time can cause the shortage of power reserve margin. To deal with these problems, the development of energy storage systems (ESS) is required. This paper proposes the 1MW grid-connected ESS with Li-ion battery and power conditioning system (PCS). The performances of the 1MW grid-connected ESS are evaluated and verified with the PSCAD/EMTDC based simulation test.

• 한국해양공학회지
• /
• 제20권1호
• /
• pp.32-36
• /
• 2006

The initial hull form of a 100 tan, 45 knot class high-speed craft is newly developed. The resistance performances are investigated using a model test at high speed in a circulating water channel. The effect of the initial trim is studied together. Wave patterns are observed to clarify the relationship between the resistance performance and the wave characteristics. It can be found that the initial trim plays a role in increasing the resistance performance above a certain velocity.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 2003

Resistance performance of 3 G/T class coastal leisure boat is experimentally investigated at high speed ranges and the effect of a fin attached at hull side is studied together. Wave patterns are observed to make clear the relation between the resistance performances and the wave characteristics.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.104-107
• /
• 2005

COMS(Communication, Ocean, and Meteorological Satellite) is the geostationary satellite for the mission of satellite communication, ocean monitoring, and meteorological service. It is scheduled to be launched at the end of 2008. Ocean payload of COMS named as GOCI(Geostationary Ocean Color Imager) observes ocean color and derives the chlorophyll concentrlition, the concentration of dissolved organic material and so on. In operational oceanography, satellite derived data products are used to provide forecasting and now casting of the ocean and coastal water state. In this work, conceptual design of structural part of GOCI is carried out and two baseline concepts are proposed. The one is dioptric module that uses lens system and the other is TMA(Three Mirror Anastigmat) module that uses mirror system. Trade-off studies between two concepts are investigated by considering optical and mechanical performances. Finally, on-going tasks and future development plan are briefly discussed.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.774-780
• /
• 2011

The guidance control module is needed for control of a GPS guided bombs to improve the accuracy and availability of a conventional bomb. In this paper, we present the development of hardware design, software design and test environments of it. And we also show the process of the tests and the results verifying and proving for its required functions and performances through ground tests and flight tests.

• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.524-530
• /
• 2012

In this study, it is performed that the assessment of feasibility of developed material processing facilities using tele-operation manipulator system for the pyroprocessing. To evaluate the performance of developed facilities using tele-operation system, several performance indices are considered as remote visibility, remote reachability and remote manipulability. These are applied to RHEM (Remote Handling Evaluation Mock-up) and digital mock-up system respectively. Through this approaches, several requirements for the system improvement are deduced and preliminary inspection for real system application is fully performed. Additionally, assembly and disassembly tasks for the repair of remote handling system are also examined remotely in RHEM and evaluated those performances.

• 한국안전학회지
• /
• 제25권4호
• /
• pp.25-29
• /
• 2010

Foam concentrate is used for fire-extinguishing purposes, occurring foam, mixed with air. In huge oil-fire or the efficiency of fire-extinguishing with small quantity of water, Foam concentrate is used widely. However, perfluorooc tanoicsulfonate and nonylpenol that are included in Foam concentrate could be exposure in danger while they were discharged. The purpose of the research is the development of environment-friendly high expansion foam that exclude the dangerous substances and improvement of danger of the existing foam concentrate. The developed foam is analyzed as the environment-friendly foam in indexes of the environment-toxicity, the biodegradation appraisal, and the dangerous substances-detecting. In addition, the performances of expansion rate, discharge rate, and fire-extinguishing are suitable in the domestic regulation, so it is useful for fire-extinguishing in real fire situation.