• 지능정보연구
• /
• 제25권1호
• /
• pp.179-196
• /
• 2019

최근의 '똑똑한 소비자(Smart Consumer)'라 불리는 소비자가 많아지고 있는데, 이들은 제조사나 광고를 통해 전달되는 정보에 의존하지 않고, 기존 사용자나 전문가들의 후기, 여러 과학 지식을 획득하여 제품에 대한 이해를 높이고, 본인 스스로가 직접 판단하여 구매하고 있다. 특히나 화장품 분야는 인체 유해성과 같은 부정적인 요소에 대한 민감도가 높고, 자신의 고유한 피부 특성과의 조화도 고려되어야 하기 때문에, 전문적인 지식과 타인의 경험, 본인의 과거 경험 등을 종합적으로 생각하여 구매 의사결정을 내려야 하고, 이에 대해서 적극적인 소비자가 많아지고 있다. 이러한 움직임은 '셀프 뷰티' 와 같은 '셀프' 문화의 열풍과 함께, 문화 현상인 '그루밍족'의 등장, 사회적 트렌드인 'K-뷰티' 와도 동행한다고 할 수 있다. 맞춤형 화장품에 대한 관심의 급부상도 이러한 현상 중 하나라 볼 수 있다. 소비자들의 맞춤형 화장품의 니즈를 충족시키기 위해, 화장품 제조사나 관련 기업들은 ICT기술과의 융합을 통하여 프리미엄 서비스를 중심으로 소비자의 니즈에 대응하고 있다. 그러나 기업 및 시장 현황이 맞춤형 화장품을 향해 진화하고 있지만, 소비자의 피부 상태, 추구하는 감성, 실제 제품이나 서비스까지 소비자 경험을 전체적으로 완전하게 다루는 지능형 데이터 플랫폼은 부재한다. 본 연구에서는 소비자 경험에 대한 지능형 데이터 플랫폼 구축을 위한 첫 단계로 소비자 언어 기반의 화장품 감성 분석을 수행하였다. 소비자들 개인의 선호나 취향이 분명한 앰플/세럼 카테고리를 중심으로 매출 순위 1위에서 99위까지의 99개 제품을 선정하여, 블로그와 트위터 등의 SNS 상에 언급되는 후기 내에 화장품 경험에 대한 소비자 감성을 수집하였다. 총 357개의 감성 형용사를 수집하였고, 고객 여정 워크샵을 통해 유사 감성을 합치고, 중복 감성을 통합하는 작업을 수행하였으며, 최종 76개 형용사를 구축했다. 구축한 형용사에 대한 SOM 분석을 통해 화장품에 대한 소비자 감성에 대한 클러스터링을 실시했다. 분석 결과, 총 8개의 클러스터를 도출했고, 클러스터 별 각 노드의 벡터 값을 기준으로 소비자 감성 Top 10을 도출했다. 소비자 감성을 기준으로 클러스터별 소비자 감성에 서로 다른 특징이 발견됐으며, 소비자에 따라 다른 소비자의 감성을 선호, 기존과는 다른 소비자 감성을 고려한 추천 및 분류 체계가 필요함을 확인했다. 연구 결과를 통해 감성 분석의 활용 도메인이 화장품만이 아닌 다양한 영역으로 확장될 수 있음 확인했으며, 감성 분석을 통한 소비자 인사이트를 도출할 수 있다는 점을 시사했다. 또한, 본 연구에서 활용한 디자인 씽킹(Design Thinking)의 방법론의 적용하여 화장품 특화된 감성 사전을 과학적인 프로세스로 구축했으며, 화장품에 대한 소비자의 인지 및 심리에 대한 이해를 도울 수 있을 것으로 기대한다.

• 한국수산과학회지
• /
• 제10권2호
• /
• pp.97-114
• /
• 1977

1. Macrobrachium rosenbergi(de Man)의 효율적인 종묘생산의 방안을 모색하기 위한 연구의 일환으로 염분량이 유생에 미치는 영향을 조사하기 위하여 부화직후의 Zoea유생을 (1) 염분량 별로 9실험구:담수, $3.48\~4.42\%_{\circ}Cl,\;5.26\~6.45\%_{\circ}Cl,\;7.63\~8.23\%_{\circ}Cl,\;9.76\~10.52\%_{\circ}Cl,\;11.27\~11.94\%_{\circ}C1,\;13.12\~14.08\%_{\circ}Cl,\;16.13\~16.88\%_{\circ}Cl$ 및 $18.04\~18.92\%_{\circ}Cl$로 구분한 사육수에서 수온 $28^{\circ}C{\pm}1$ 및 여과유속 0.6l/min.로 고정한 순환식 수조(용량 25l)내에서 Artemia salina nauplii 투이하며 post-larva령기까지 변태되는 온도별 성장 속도와 그 변태율을 비교하여 본 유생의 생육여과도를 조사하였고, (2) 각 령기별유생의 각종 염분량에 대한 적응도와 선택기호성을 조사하기 위하여 1l 용량의 코니칼 비커속에 수온 $28^{\circ}C{\pm}1$, aeration (3-4기포/sec)을 약하게 유지한 12실험구 ; 담수, $2.21\~2.76\%_{\circ}Cl,\;4.12\~4.47\%_{\circ}Cl,\;5.58\~5.98\%_{\circ}Cl,\;8.23\~8.64\%_{\circ}Cl,\;10.11\~10.56\%_{\circ}Cl,\;11.85\~12.42\%_{\circ}Cl,\;13.05\~14.51\%_{\circ},\;14.75\~15.38\%_{\circ}Cl,\;16.86\~17.72\%_{\circ}Cl\;18.54\~19.08\%_{\circ}Cl$ 및 해수$(19.38\%_{\circ}Cl)$로 구분한 사육수에 제 1 Zoea 령기, 제 4 Zoea 령기, 제 6 Zoea 령기, 제 8 Zoea 령기, 제 10 Zoea령기 및 제 11 Zoea령기를 급격한 염도변화에 조우당함을 피하기 위하여 일정한 염도에 순화시킨 후 각각 이주시켜 Artemia salina nauplii를 투이하고 2일간격으로 실험구의 사육수를 치환하며 6일간을 사육한 후 각실험구별의 생잔유생수를 서로 비교하였다. (3) 수온 $28^{\circ}C{\pm}1$를 유지시키고 염도가 상이한 3종의 사육조 ; $3.82\~4.68\%_{\circ}Cl,\;7.14\~7.85\%_{\circ}Cl$ 및 $10.22\~11.05\%_{\circ}Cl$에서 사육, 성장시킨 제 2 Zoea, 제 4 Zoea, 제 6 Zoea 및 제 8 Zoea 령기의 유생을 별도로 염분별로 3실험구 : $3.68\~4.34\%_{\circ}Cl,\;7.42\~8.28\%_{\circ}Cl$ 및 $10.71\~11.53\%_{\circ}Cl$로 구분한 150 l 용량의 여과실험조에 서로 염도가 상이한 간격간을 이주 (Fig. 4)시켜 12일간을 Artemia salina nauplii를 투이하고 수온 $28^{\circ}C{\pm}1$을 유지시키며 사육한 후 이주시킨 유생의 령기별 및 사육도중에 이주한 염도의 간격차에 대한 생잔율을 서로 비교하여 사육도중에 조우하는 변동된 염도에 대한 각 령기별 유생의 적응도를 조사하였으며 이 실험을 위하여 수온 $28^{\circ}C{\pm}1$, 염분량 $5.28\%_{\circ}Cl$에서 갓 부화된 유생을 각사육조에 분양시켜 사육하였다. (4) post-larvarl 및 Juvenile의 염분량에 대한 성장률 및 서식적염도를 조사하기 위하여 수온 $28^{\circ}C{\pm}1$, 여과유속 $0.6\~0.8l\~min$를 유지시키며 염분별로 6실험구 ; 담수 $3.61\~4.25\%_{\circ}Cl$ 및 $16.87\~17.13\%_{\circ}Cl$로 구분하여 각실험별로 40일, 60일 및 120일의 성장도 및 그 생잔율을 상호 비교하였다. qs 실험기간중 투여한 이료는 반숙절편한 반지락을 사용하였다. 2. 본유생의 post-larva로 변태하기 위해서는 반드시 일정량의 염분량이 요하고 기호, 선택하는 염분량은 각령기에 따라 다소상이하나 대체로 염분량 $7.63\%_{\circ}Cl$에서 $14.42\%_{\circ}Cl$의 범위가 적염도로 생각되며 이 범위내에서는 염분량에 따른 변태속도의 차이는 거의 볼 수 없으나 염분량 $4.42\%_{\circ}Cl$이상의 보다 높은 염도에서는 현저한 지연현상이 나타나며 더욱이 높은 염도에 비하여 저염도인 경우가 더욱 늦어지는 경향을 보인다. 3. 각 Zeoa 령기별의 염분량에 대한 적응도는 대체로 염분량 $8.28\~12.42\%_{\circ}Cl$ 사이가 가장 크나 령기가 기호, 선택하는 염분량에 차이가 있으므로 그 적응도도 서로 상이하다. 보편적으로 전령기를 통하여 제8 Zoea기를 전환점으로 하여 이 보다 어린 령기의 유생일수록 비교적 높은 염도에 대한 적응도가 높은데 반하여 령기가 진전되어 post-larva 기로 근접해 갈수록 점차적으로 저염도에 대한 기호, 선택성이 커지는 경향을 보인다. 4. Post-larva기에 대한 서식적염도는 염분량 $8.08\%_{\circ}Cl$ 담수의 범위로서 Zoea 령기에 비하여 저염성을 나타내고 더우기 적정범위는 염분량 $4.25\%_{\circ}Cl$로서 담수에 가까울수록 그 성장도는 높다. 따라서 Zoea유생은 담수에서 보다 성장률이 높다. 한편 post-larva는 령기 의 개체가 해수($19.38\%_{\circ}Cl$ 이상)에서 1일이상을 생존치 못하는데 비하여 Zoea 유생은 6일이사을 적응할 수가 있다. 5. Zoea 유생은 염분량에 대한 특성이 령기의 진전에 따라 고염성으로부터 저염성으로 그 특성이 조금씩 이행됨은 제8 Zoea 령기를 지나므로써 post-larva 기가 가지고 제 특성으로 점차 이행되기 때문으로 생각되며 이같은 현상을 뒷받침하는 것은 형태적으로 제 8 령기를 전후하여 종전의 유생에 제1, 제2 보각에 협지가 형성됨과 동시에 유영피도 거의 완성되어 post-larve 기의 형태로 이행됨을 볼 수 있고 또한 생태적으로도 제10-제11령기에 이르러서는 종전의 유영층에서 점차로 저변으로 이행하여 유영동작도 훨씰 둔화되어 post-larvarl로 전환되는 과도기의 특성을 관찰할 수가 있다. 따라서 이같은 점을 결부하여 제 8 령기를 지남으로써 염분량에 대한 특성 및 적응도가 종전의 유생기와 상이해 짐을 이해할 수 있다. 6. 령기별 Zoea유생을 사육도중에 염분량 $3.68\~11.53\%_{\circ}Cl$ 범위내에서 고, 저염도간을 갑자기 이주시켜 조우한 염도변화에 대한 적응도를 조사하니 제 8 Zoea 령기를 전환점으로 하여 어린 령기일수록 저염도에서 높은 염도로 이주했을 때의 적응도가 크고, 령기가 진전되어 post-larva 기에 가까워 질수록 반대로 높은 온도에서 저염도로 이주했을 때의 적응도가 점차로 커져가는 경향을 보였다. 또한 특의한 현상은 상이한 두 염도간을 가역방향으로 이주시켰을 때의 적응도는 각각 상이하고 이같은 경우에도 제 8 Zoea 령기를 경계로 하여 이동된 염분량에 대한 령기별 유생의 적응도도 전환되는 현상을 나타내었다. 7. Zoea 유생을 사육하는 동안 사육수의 염분함유량에 비례하여 유생의 체표에 산재하는 색소포가 팽창되어 주로 붉은색을 나타내게 됨으로 염분함유량과 색소포의 확장과는 어떤 관계가 있는 듯 생각된다. 8. 령기별 Zoea 유생 및 post-larva 기의 염분량에 대한 기호, 선택성과 치하 및 성하의 서식분포역을 고려할 때 자연서식역의 하천에서는 왕부하는 생활사를 취하는 듯 생각된다. 9. 본종의 종묘생산을 효율적으로 영위하기 위해는 유생의 염분량에 대한 특성을 고려하여 제 8 Zoea 령기를 경계로 해서 어린 유생기에서는 대략 염분량 $8\%_{\circ}Cl$에서 $12\%_{\circ}Cl$를 유지시켜 사육하다가 제 8령기 이후 부터는 점차로 담수를 첨가시켜 염분량이 령기의 진전에 따라 $7\%_{\circ}Cl$에서 $4\%_{\circ}Cl$로 이행되게 하는 것이 능률적이며 또한 효과적인 사육법의 하나로써 Green water를 사용할 때도 사육환경의 변동에 민감한 어린 유생기에 단세포 녹조류를 충분히 번식시켜 사육수내이 생물학적 평형상태를 유지시켜 주는 것이 중요함으로 어린 령기에는 가능한 염도를 높여 Green water의 보존도 효과적으로 하는 것이 전망된다.

• 한국작물학회지
• /
• 제7권1호
• /
• pp.1-29
• /
• 1969

중부지방에 있어서 수도건답직파재배 기술체계를 확립하고저 충청남도농촌진흥원에서 품증,시비, 파종기와 파종량, 관수시기 및 제초제에 관한 시험을 실시하였는데 그 결과를 요약하면 다음과 같다. 1. 수도 주요품종 16개를 건답직파재배를 하고 또한 수개 품종은 보통 이앙재배도 병행하여 건답직파재배의 경우와 수량 및 수량구성요소에 대하여 비교하였으며 각 품종의 생육과 수량 및 수량구성요소에 대한 특성을 조사하여 품종간의 차이를 보았다. (1) 건답직파재배는 이앙재배보다 수수가 현저히 많았으며 1수영화수는 반대로 매우 적었으며 결실율은 낮았고 수량은 품종에 따라 차이가 있는데 호광은 많았고 농립2005는 이앙재배보다도 적었다. (2) 공시품종 16개 가운데 수량이 10a당 325kg이상으로서 비교적 많았던 품종은 선단, 농림2005, 재건, 호광, 팔굉 및 고시였고 반대로 271kg이하로서 비교적 적었던 품종은 남풍, 팔달, 농공, 농림29호, 은방주10001 및 ${\ulcorner}$시로가네${\lrcorner}$로서 그들 품종의 수량과 수량구성요소와의 관계를 보면 ${\bullet}$ 수수와 수량 : ㄱ. 수수가 많고 수량이 많은 품종=재건, 호광, 팔굉, 고시. ㄴ. 수수가 적고 수량이 많은 품종=선단, 농림2005. ㄷ. 수수가 많고 수량이 적은 품종=은방주10001 ${\ulcorner}$시로가네${\lrcorner}$. ㄹ. 수수가 적고 수량도 적은 품종=남풍, 팔달, 농림29호. 1. 수영화수와 수량 : ㄱ. 1수영화수가 많고 수량이 많은 품종=선단, 농림2005, 고시. ㄴ. 1수영화수가 적고 수량이 많은 품종=재건, 호광, 팔굉. ㄷ. 1수영화수가 많고 수량이 적은 품종=팔달, 남풍. ㄹ. 1수영화수가 적고 수량도 적은 품종=농림29호. 은방주10001 ${\ulcorner}$시로가네${\lrcorner}$. ${\bullet}$ 결실율과 수량 : ㄱ. 결실율이 높고 수량이 많은 품종=재건, 선단, 농림2005, 팔굉. s. 결실율이 낮고 수량이 많은 품종=호광, 고시. ㄷ. 결실율이 높고 수량이 적은 품종=은방주, 팔달, ㄹ. 결실율이 낮고 수량도 적은 품종=은방주10001, 남풍, ${\ulcorner}$시로가네${\lrcorner}$.${\bullet}$ 천립중과 수량 : ㄱ. 천립중이 무겁고 수량이 많은 품종=농림2005, 호광. ㄴ. 천림중이 가볍고 수량이 많은 품종=선단, 재건. ㄷ. 천립중이 무겁고 수량이 적은 품종=농광, 은방주. ㄹ. 천립중이 가볍고 수량도 적은 품종=농림29호, ${\ulcorner}$시로가네${\lrcorner}$. 2. 삼요소의 시용 시험결과 그 적량은 10a당 질소 10kg, 인산 5kg, 및 가리 6kg 정도였으며 질소는 8kg 이상의 경우에는 분시할수록 비효가 높았으며 특히 벼의 후기 중점시비에 의하여 1수영화수와 결실율의 증대가 크게 이루어졌다. 3. 파종기와 파종량에 관한 시험결과는 공시품종선단의 파종적기는 4월 25일부터 5월 10일경까지 인데 이 기간중 일찍 파종하는 경우에 파종적량은 10a당 약 8${\ell}$이고 늦은 경우에는 12${\ell}$ 정도였다. 여기서 늦게 파종한 경우 감수의 가장 큰 원인은 1수영화수가 적어지기 때문이었다. 4. 건답직파에 대한 담수상태로 관수를 시작하는 적기는 파종후 55일인 6월 25일구가 수량이 가장 많았고 이보다 15일전인 6월 10일과 15일후인 7월 15일구도 좋았으며 이보다 늦어지면 감수됨을 인정하였다. 5. LOROX.TOK.PCP.MO-338의 약제토양처리구들은 관행제초구의 수량과 통계적으로 유의차를 보이지 않았으나 수치적으로는 관행제초구보다 적었다. 한편 관수후에 TOK.MO-338, StamF-34, ORDRAM의 약제처리를한 구의 수량은 관행제초구에 비하여 ORDRAM과 TOK는 유의차가 인정되지 않았으며 그밖에 약제처리구는 수량이 적음을 인정하게 되었다. 또한 각약제의 토양처리에 대한 잡초의 반응은 각각 다르고 LOROX는 ${\ulcorner}$바랭이${\lrcorner}$에 대하여 살초율이 높았고 TOK, MO-338은 화본과잡초에도 효과가 있었으나 그밖에 잡초에 대하여도 살초율이 높았다. 그리고 관수호의 처리에 있어서 ORDRAM 및 TOK는 살초율이 높았고 TOK, MO-338 및 StamF-34는 살초효과도 있고 그밖에 잡초에 대해서도 살초효과가 좋았다.

• 농업과학연구
• /
• 제4권2호
• /
• pp.283-316
• /
• 1977

한국(韓國)에 있어서 벼 잎집무늬마름병(病)의 발생변동(發生變動), 병원균(病原菌)의 배양적(培養的) 특성(特性)과 병원성(病原性), 발병환경(發病環境), 재배법(栽培法)과 발병관계(發病關係), 품종(品種)의 저항성(抵抗性) 등(等)에 관(關)하여 연구(硏究)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 한국(韓國)에 있어서 벼 잎집무늬마름병(病)의 발생면적(發生面積)은 다비재배(多肥栽培), 조기조식재배(早期早植栽培) 및 통일계품종(統一系品種)의 확대보급등(擴大普及等)으로 인(因)하여 매년(每年) 증가(增加)되었고 특(特)히 1971년(年)부터 전국적(全國的)으로 급격(急激)히 발생면적(發生面積)이 증가(增加)되어서 1976년(年)에는 전체수도재배면적(全體水稻栽培面積)의 약 65.2%에서 본병(本病)이 발생(發生)하였다. 2. 우리나라에 분포(分布)하는 벼 잎집무늬마름병균(病菌)의 배양적(培養的) 성질(性質) 및 병원성(病原性)에는 많은 변이(變異)가 있었으며 병원균(病原菌)의 생육최적(生育最適) 온도(溫度)도 $25^{\circ}C$에서 $30^{\circ}C$사이로 균주간(菌株間)에 차이(差異)가 있었다. 한편 병원균(病原菌)의 배양적(培養的) 성질(性質)과 병원성(病原性)에는 상관관계(相關關係)가 없었다. 3. 잎집무늬마름병균(病菌)의 PDA배지상(培地上)에서의 균사생장(菌絲生長)은 채집지(採集地)의 기온(氣溫)과 밀접(密接)한 관계(關係)가 있었다. 즉 채집지(採集地)의 기온(氣溫)이 높은 지역(地域)의 균주(菌株)들은 기온(氣溫)이 낮은 지역(地域)의 균주(菌株)들에 비(比)해 $35^{\circ}C$ PDA배지(培地)에서 균사생장(菌絲生長)이 양호(良好)하였고 반대로 $12^{\circ}C$ PDA배지상(培地上)에서는 기온(氣溫)이 낮은 지역(地域)에서 채집(採集)한 균주(菌株)들이 기온(氣溫)이 높은 지역(地域)에서 채집(採集)한 균주(菌株)들 보다 균사생장(菌絲生長)이 양호(良好)하였다. 4. 잎집무늬마름병균(病菌)을 접종(接種)한 수도엽(水稻葉)으로부터 얻은 Pectin polygalacturonase 및 Cellulase의 역가(力價)는 접종(接種)3일(日)째에 최대(最大)였고 Pectin methylestrase의 역가(力價)는 접종(接種) 4일(日)째에 최대(最大)였으며 병원성(病原性)이 강(强)한 균주(菌株)에서는 Pectin methylestrase의 활성(活性)이 높은 경향(傾向)이었고 병원성(病原性)이 약한 균주(菌株)에서는 Pectin methylestrase의 활성(活性)이 낮은 경향(傾向)이었으나 다른 효소(酵素)들은 병원성(病原性)과 관계(關係)가 없었다. 5. 배지(培地)에 형성(形成)된 균핵(菌核)을 건조처리(乾燥處理)하였을 경우(境遇)의 저온저항성(低溫抵抗性)은 매우 강(强)하여 $-20^{\circ}C$에서도 발아력(發芽力)을 상실(喪失)치 않았으나 습윤처리(濕潤處理) 하였을 경우(境遇)에는 저항성(抵抗性)이 매우 약(弱)하여 $-5^{\circ}C$에서도 발아력(發芽力)을 상실(喪失)하였다. 포장(圃場)에서 월동(越冬)한 균핵(菌核)의 발아율(發芽率)도 답토양(沓土壤)의 건습(乾濕)에 따라 18%~70%의 차이(差異)를 나타내며 담수상태(湛水狀態)에서 월동(越冬)한 균핵(菌核)은 건조(乾燥)한 토양(土壤)에서 월동(越冬)한 균핵(菌核)보다 발아율(發芽率)이 낮았다. 6. 잡초(雜草)에 대(對)한 기생성(寄生性)을 조사(調査)하였던 바 벗풀(Sagittaria trifolia L.), 물달개비(Monochoria vaginalis Presl), 여뀌(Polygonum hydropiper L.). 피(Echinochloa crusgalli P. Beauv), 한련초(Eclipta prostrata L.), 강아지풀(Septaria viridis P. Beauv.), 좀바랭이(Digitaria sangvinalis Scapoli) 등(等)에서 잎집무늬마름병반(病斑)이 형성(形成)되었다. 7. 질소배비구(窒素倍肥區)에서는 잎집무늬마름병(病)의 피해(被害)가 증가(增加)하였고 가리배비구(加里倍肥區)에서는 감소(減少)하였으나 규산시용구(硅酸施用區)에서는 피해감소(被害減少)의 효과(效果)가 없었다. 규산시용구(硅酸施用區)에서는 도체내(稻體內)의 질소함량(窒素含量)과 전분함량(澱粉含量)이 다같이 감소(減少)하였다. 8. 생육전기(生育前期)의 이병경율(罹病莖率)은 밀식구(密植區)가 높았으나 생육후기(生育後期)에는 소식구(疎植區)의 1주당(株當) 분얼수(分蘖數)가 많아 이병경율(罹病莖率) 및 피해도(被害度)가 높아졌으며 주당(株當) 1본식(本植)한 구(區)에서는 피해(被害)가 적었다. 9. 잎집무늬마름병(病)에 대(對)한 수도(水稻) 품종(品種)의 피해도차이(被害度差異)는 출수일수(出穗日數)와 밀접(密接)한 관계(關係)가 있었다. 즉 출수일수(出穗日數)와 피해도(被害度)와의 상관관계(相關關係)는 6월(月)13일(日) 이앙(移秧)한 구(區)에서는 r=-0.707이었고 6월(月) 25일(日) 이앙(移秧)한 구(區)에서는 r=-0.496으로 비교적 높은 상관(相關)을 나타내어 출수(出穗)가 빠른 것이 피해(被害)가 크고 낮은 것이 피해(被害)가 적은 경향(傾向)이었다. 또한 본병(本病)은 분얼(分蘖)이 많은 품종(品種)일수록 피해(被害)가 심(甚)하였다. 10. 생육전기(生育前期)의 이병경율(罹病莖率)은 출수후(出穗後)의 피해도(被害度)와 상관(相關)이 없었으나 생육후기(生育後期)의 이병경율(罹病莖率)은 피해도(被害度)와 상관(相關)이 높았다.

• 한국작물학회지
• /
• 제47권
• /
• pp.15-32
• /
• 2002

1980-'90년대에 쌀의 자급생산이 지속되고 생활수준 향상에 따른 양질미 수요가 점증되면서 자포니카 다수성 품종의 미질 개선에 힘을 크게 기울이게 되었고 식미향상을 위한 육종연구 와 효율적 평가 기술개발 연구에 박차를 가하게 되어 쌀의 이화학적 특성과 식미 및 밥 물리성간 상관과 식미의 객관적 평가방법 개발, 양식미 쌀 및 가공적성 특수미 개발 등 그 동안 많은 연구성과를 올리게 되었다. 1990년대에 밥맛이 매우 좋은 고품질 자포니카 품종과 대립, 심백미, 향미, 유색미 등 가공용 특수미 품종을 개발 보급하였고 식미와 용도에 대하여 식미검정계, 신속점도측정계 및 texture 분석계 등을 이용하여 검토하였다. 최근에는 아밀로스 함량이 9%로 찹쌀과 맵쌀의 중간 성질을 가진 중간찰 품종인 '백진주벼'와 배유가 보얀 멥쌀인 '설갱 벼'를 비롯하여 라이신 함량이 높은 '영안벼' 육성하여 쌀의 가공 이용성과 기능성을 한층 높혀 놓았다. 식미와 여러 가지 미질 특성간 관련성에 관한 연구 결과를 요약해 보면 다음과 같다. 쌀의 상온흡수율 및 최대흡수율은 K/Mg율 및 알칼리 붕괴도와 유의한 부의 상관성을 나타내었으며 가열흡수율이 높은 품종일수록 밥의 용적팽창률이 컸다. 수분함량이 낮은 경질인 쌀일수록 침지 20분 후의 상온흡수율과 최대흡수율이 더 높은 경향이었으며 이러한 흡수 특성은 쌀 단백질 함량이나 아밀로스 함량 및 식미와는 유의한 상관성이 없었다 취반 적정가수량은 품종에 따라 마른 쌀 무게의 1.45-l.61배의 변이를 나타내었고 평균은 1.52배였으며 알맞게 취사된 밥의 부피는 평균 쌀 부피의 2.63배가되었다. 쌀 형태, 알칼리붕괴도, 호응집성, 아밀로스 및 단백질 함량은 거의 비슷하지만 식미에 차이가 있는 자포니카 품종들을 사용하여 식미와 관련된 쌀의 이화학적 특성을 검토한 결과, 밥의 윤기와 식미 총평은 생산 연도에 따라 호화점도 특성 중 최고점도, 최저점도 및 응집점도와 밀접한 관계를 나타내었다. 밥맛이 가장 좋은 일품 벼는 쌀의 외층에 아밀로스 함량 분포가 낮고 쌀을 열탕에 담근 20분간 우러난 용출액의 요드 정색도가 낮고 증가정도도 완만하였다. 일품 벼는 밥맛이 떨어지는 동해 벼에 비해 밥알 횡단면의 주사형 전자현미경 사진에서 밥알 외층의 호화전분의 그 물망이 매우 치밀하고 속층의 전분립의 호화정도가 양호하였다. 식미총평은 식미관련 이화학적 특성과의 관계를 이용한 중회귀식에 의해 매우 높은 결정계수로 추정이 가능하였다. 밥노화의 품종간 차이는 α-amylase-iodine 법으로 비교할 수 있었는데 노화정도가 적었던 품종은 일품벼, 추청벼, 사사니시끼, 진부벼 및 고시히까리였다. 통일형 품종인 태백벼와 자포니카 품종 중 섬진벼가 비교적 밥노화가 빨랐다 일반적으로 밥맛이 좋은 품종이 밥의 노화정도가 느렸으며 찬밥의 탄력성이 큰 경향이었다. 또한 밥노화가 느렸던 품종은 최저점도가 높았고 최종점도가 낮았다 찬밥의 탄력성은 쌀의 마그네슘함량과 밥의 용적팽창률과 밀접한 관계를 나타내었다. 식은밥의 더운밥 대비 경도 변화율은 취반용출액의 고형물량과 취반용적 팽창률과 부의 상관을 나타내었다. 식미관련 주요 이화학적 특성은 밥의 노화와도 직접 간접으로 상관이 있는 것으로 평가되었다. 쌀의 여러 가지 식품 가공적성과 관련된 형태 및 이화학적 특성은 가공식품 종류에 따라 매우 다르다. 쌀 튀김성은 호응집성이 연질이거나 아밀로스 함량이 낮을수록 양호하며 지질함량이나 단백질 함량이 높으면 좋지 않은 경향이다. 심복백정도가 심할수록 튀김현미 정립률이 떨어지며 현미 강도가 높을수록 튀김률은 높은 경향이었다 쌀국수는 밀가루와 50% 혼합시에 쌀의 칼륨 및 마그네슘 함량이 높은 품종일수록 제면 총평이 낮은 경향이었고 제면이 양호한 것이 국수물의 용출고형 물량이 적은 경향이었다. 쌀빵 가공적성은 품종에 따라서 현미와 백미간에 현저한 차이를 나타내는 것이 있는데 현미에서 반죽의 부피 증가율이 큰 쌀일수록 푹신한 감이 있는 쌀방 제조가 가능하였으며 백미에서 단백질 함량이 높은 품종일수록 쌀빵이 더욱 촉촉한 느낌이 있는 경향이었다. 아밀로스 함량이 높고 호응집성이 경질인 쌀일수록 쌀빵의 탄력성이 더 높은 경향이었다. 쌀의 발효 및 양조적성은 심복백이 심한 쌀이나 새로운 돌연변이인 뽀얀 멥쌀이 홍국균이나 홍국균의 균사활착 밀도가 높고 당화 효소 역가도 높은 경향이었으며 쌀알이 대립이면서 단백질 함량이 낮은 쪽이 양조에 유리한 것으로 알려져 있다. 찰벼 품종도 여러 가지 이화학적 특성과 전분구조 특성의 차이에 따라 9개의 품종군으로 나누어 볼 수 있을 만큼 품종적 변이가 크며 이들 이화학적 및 구조적 특성간에 상호 밀접한 연관성을 나타내었으며 유과·인절미·식혜ㆍ미숫가루 등에 상당한 가공적성의 차이를 보였다. WTO 체제 출범이후 생산비와 가격 면에서 경쟁력이 약한 우리 쌀이 살아남기 위해서는 품질의 고급화와 쌀 가공식품의 다양화 및 고기능성 개발을 추구할 수밖에 없다. 따라서 이와 같은 노력은 벼 품종개발만으로 소기의 성과를 올리기 어렵고 쌀 식품의 고급화 및 다양화를 위한 여러 분야의 긴밀한 연구협력이 수반되지 않으면 안 된다.

• Applied Biological Chemistry
• /
• 제17권3호
• /
• pp.193-218
• /
• 1974

본(本) 연구(硏究)는 산도(酸度)가 극(甚)히 높고 수도(水稻)의 생육(生育)이 저조(低調)하며 수량(收量)이 낮은 특이산성답(特異酸性畓) 토양(土壞)에 대(對)한 특성조사(特性調査)와 그 개량(改良)의 목적(目的)으로 석회(石灰)를 시용(施用)하였을 때 토양(土壞)의 화학적(化學的) 성질(性質)과 수도묘(水稻苗)의 생육(生育)에 미치는 영향(影響)을 검사(檢討) 연구(硏究)하고져 하였다. 즉(則) 특이산성답토양(特異酸性畓土壞)에서 석회(石灰)의 시용(施用)이 그 토양(土壤)의 산도(酸度), 산화환원전위차(酸化還元電位差), 2가철(價鐵), 알루미늄 및 황산함량(黃酸含量)의 변화(變化)와 토양인(土壞燐)의 화학적(化學的) 형태(形態)에 미치는 영향(影響)을 담수(湛水) 및 건조(乾燥)와 같은 환경(環境)의 변화하(變化下)에서 추구(追究)하였으며 한편 수도(水稻)의 묘생육(苗生育)에 대(對)하여 인산(燐酸), 철(鐵) 및 알루미늄의 개량적(改良的) 또는 저해적(沮害的) 효과(效果)를 석회(石灰)의 영향하(影響下)에서 검사(檢討)한 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 특이산성답(特異酸性畓) 심토(心土)는 석회(石灰)가 시용(施用)되어도 건조(乾燥)되면 다시 pH가 저하(低下)된다. 2. Eh는 담수(湛水) 5일경(日頃)에 최저(最低)로 되고 석회시용(石灰施用)으로 크게 하강(下降)되나 건조(乾燥)되면 다시 상승(上昇)된다. 3. 수용성(水用性) 및 Morgan 용액가용(溶液可溶) 2 가철(價鐵)의 함량(含量)은 담수(湛水) 15일경(15日頃)에 최고(最高)로 되며 수용성(水用性) 2 가철(價鐵)만이 석회시용(石灰施用)에 의(依)하여 크게 감소(減少)된다. 4. 수용성(水用性) 및 Morgan 용액가용(溶液可溶) 알루미늄 함량(含量)은 담수(湛水)와 석회시용(石灰施用)으로 감소(減少)되며 건조(乾燥)에 의(依)하여 약간 증가(增加)되는 경향(傾向)이다. 5. 석회(石灰)를 시용(施用)한 특이산성답(特異酸性畓) 토양(土壞)에서 수용성(水用性) 석회(石灰)와 황산함량(黃酸含量) 간(間)에는 고도(高度)의 유의성(有意性) 있는 부상관(負相關) 관계(關係)가 있으며 석회시용(石灰施用)은 토양(土壞)의 황산함량(黃酸含量)을 감소(減少)시킨다. 6. 전린(全燐)은 특이산성답(特異酸性畓) 표토(表土)에서 496.3ppm, 심토(心土)에서 387.5ppm이었으며 무기인(無機燐)의 함량(含量)은 Fe-P>Occ.Fe-P>Ca-P>Occ.Al-P>Al-P 의 순(順)으로 Fe-P가 가장 많았다. 7. 석회시용(石灰施用)은 토양(土壞)의 Ca-P나 Al-P 등(等)을 크게 증가(增加)시키고 Occ. Fe-P와 Occ. Al-P도 증가(增加) 시키나 Fe-P는 감소(減少)시키는데 그 정도(程度)는 토양(土壞)에 따라 다르다. 8. 수도묘(水稻苗)의 건물중(乾物重)에 대(對)한 인산효과(燐酸?果)는 현저(顯著)하며 석회(石灰)를 시용(施用)하지 않을때는 인산(燐酸) 흡수계수(吸收係數)의 6.8%, 석회(石灰)를 시용(施用)할 때는 인산(燐酸) 흡수계수(吸收係數)의 10.0% 해당량(該當量)에서 가장 많은 건물중(乾物重)을 생산(生産)하였다. 9. 석회(石灰) 시용(施用)은 수도묘중(水稻苗中)의 석회(石灰) 및 규산(珪酸)의 함량(含量)과 그 흡수량(吸收量)을 증가(增加)시키나 철(鐵) 및 알루미늄함량(含量)과 그 흡수량(吸收量)을 감소(減少)시킨다. 묘중(苗中)의 인산함량(燐酸含量)이나 흡수량(吸收量)은 인산시용(燐酸施用)으로 증가(增加)되나 철함량(鐵含量)은 감소(減少)되며, 철(鐵)이나 알루미늄의 시용(施用)은 이들의 함량(含量)과 흡수량(吸收量)을 증가(增加)시키나 인산함량(燐酸含量)과 흡수량(吸收量)은 감소(減少)시킨다. 10. 석회(石灰)의 시용(施用)은 과잉(過剩)의 철(鐵)과 알루미늄에 의(依)한 피해(被害)를 크게 경감(輕滅)시킨다. 11. 인산(燐酸) 시용시(施用時) 묘(苗)의 건물중(乾物重)은 묘중(苗中)의 인산(燐酸), 석회(石灰) 및 규산(珪酸)의 흡수량(吸收量)과 고도(高度)의 유의성(有意性)있는 정상관관계(正相關關係)가 있었고 철(鐵) 및 알루미늄 시용시(施用時) 건물중(乾物重)은 석회(石灰), 규산(珪酸)의 함량(含量) 및 그 흡수량(吸收量)과는 유의성(有意性) 있는 정상관(正相關), 철(鐵) 및 알루미늄의 함량(含量)과 이들의 흡수량(吸收量)과는 유의성(有意性)있는 부상관(負相關) 관계(關係)가 있었다. 12. 석회(石灰)와 인산(燐酸)을 시용(施用)하였을 때 묘(苗)의 건물중(乾物重)은 시험(試驗) 후(後) 토양(土壤)의 pH 및 Morgan 용액(溶液) 가용(可溶) 석회(石灰) 함량(含量)과 고도(高度)의 유의성(有意性)있는 정상관(正相關) 관계(關係)가 있었고 석회(石灰)와 철(鐵) 및 알루미늄을 시용(施用)한 시험(試驗) 후(後) 토양(土壤)의 pH와 석회(石灰) 및 규산함량(珪酸含量)과도 유의성(有意性)있는 정상관(正相關), 철(鐵) 및 알루미늄의 함량(含量)과는 부(負)의 상관관계(相關關係)가 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Journal of Preventive Medicine and Public Health
• /
• 제7권1호
• /
• pp.29-94
• /
• 1974

Today most developed countries provide modern medical care for most of the population. The rural area is the more neglected area in the medical and health field. In public health, the philosophy is that medical care for in maintenance of health is a basic right of man; it should not be discriminated against racial, environmental or financial situations. The deficiency of the medical care system, cultural bias, economic development, and ignorance of the residents about health care brought about the shortage of medical personnel and facilities on the rural areas. Moreover, medical students and physicians have been taught less about rural health care than about urban health care. Medical care, therefore, is insufficient in terms of health care personnel/and facilities in rural areas. Under such a situation, there is growing concern about the health problems among the rural population. The findings presented in this report are useful measures of the major health problems and even more important, as a guide to planning for improved medical care systems. It is hoped that findings from this study will be useful to those responsible for improving the delivery of health service for the rural population. Objectives: -to determine the health status of the residents in the rural areas. -to assess the rural population's needs in terms of health and medical care. -to make recommendations concerning improvement in the delivery of health and medical care for the rural population. Procedures: For the sampling design, the ideal would be to sample according to the proportion of the composition age-groups. As the health problems would be different by group, the sample was divided into 10 different age-groups. If the sample were allocated by proportion of composition of each age group, some age groups would be too small to estimate the health problem. The sample size of each age-group population was 100 people/age-groups. Personal interviews were conducted by specially trained medical students. The interviews dealt at length with current health status, medical care problems, utilization of medical services, medical cost paid for medical care and attitudes toward health. In addition, more information was gained from the public health field, including environmental sanitation, maternal and child health, family planning, tuberculosis control, and dental health. The sample Sample size was one fourth of total population: 1,438 The aged 10-14 years showed the largest number of 254 and the aged under one year was the smallest number of 81. Participation in examination Examination sessions usually were held in the morning every Tuesday, Wenesday, and Thursday for 3 hours at each session at the Namchun Health station. In general, the rate of participation in medical examination was low especially in ages between 10-19 years old. The highest rate of participation among are groups was the under one year age-group by 100 percent. The lowest use rate as low as 3% of those in the age-groups 10-19 years who are attending junior and senior high school in Taegu city so the time was not convenient for them to recieve examinations. Among the over 20 years old group, the rate of participation of female was higher than that of males. The results are as follows: A. Publie health problems Population: The number of pre-school age group who required child health was 724, among them infants numbered 96. Number of eligible women aged 15-44 years was 1,279, and women with husband who need maternal health numbered 700. The age-group of 65 years or older was 201 needed more health care and 65 of them had disabilities. (Table 2). Environmental sanitation: Seventy-nine percent of the residents relied upon well water as a primary source of dringking water. Ninety-three percent of the drinking water supply was rated as unfited quality for drinking. More than 90% of latrines were unhygienic, in structure design and sanitation (Table 15). Maternal and child health: Maternal health Average number of pregnancies of eligible women was 4 times. There was almost no pre- and post-natal care. Pregnancy wastage Still births was 33 per 1,000 live births. Spontaneous abortion was 156 per 1,000 live births. Induced abortion was 137 per 1,000 live births. Delivery condition More than 90 percent of deliveries were conducted at home. Attendants at last delivery were laymen by 76% and delivery without attendants was 14%. The rate of non-sterilized scissors as an instrument used to cut the umbilical cord was as high as 54% and of sickles was 14%. The rate of difficult delivery counted for 3%. Maternal death rate estimates about 35 per 10,000 live births. Child health Consultation rate for child health was almost non existant. In general, vaccination rate of children was low; vaccination rates for children aged 0-5 years with BCG and small pox were 34 and 28 percent respectively. The rate of vaccination with DPT and Polio were 23 and 25% respectively but the rate of the complete three injections were as low as 5 and 3% respectively. The number of dead children was 280 per 1,000 living children. Infants death rate was 45 per 1,000 live births (Table 16), Family planning: Approval rate of married women for family planning was as high as 86%. The rate of experiences of contraception in the past was 51%. The current rate of contraception was 37%. Willingness to use contraception in the future was as high as 86% (Table 17). Tuberculosis control: Number of registration patients at the health center currently was 25. The number indicates one eighth of estimate number of tuberculosis in the area. Number of discharged cases in the past accounted for 79 which showed 50% of active cases when discharged time. Rate of complete treatment among reasons of discharge in the past as low as 28%. There needs to be a follow up observation of the discharged cases (Table 18). Dental problems: More than 50% of the total population have at least one or more dental problems. (Table 19) B. Medical care problems Incidence rate: 1. In one month Incidence rate of medical care problems during one month was 19.6 percent. Among these health problems which required rest at home were 11.8 percent. The estimated number of patients in the total population is 1,206. The health problems reported most frequently in interviews during one month are: GI trouble, respiratory disease, neuralgia, skin disease, and communicable disease-in that order, The rate of health problems by age groups was highest in the 1-4 age group and in the 60 years or over age group, the lowest rate was the 10-14 year age group. In general, 0-29 year age group except the 1-4 year age group was low incidence rate. After 30 years old the rate of health problems increases gradually with aging. Eighty-three percent of health problems that occured during one month were solved by primary medical care procedures. Seventeen percent of health problems needed secondary care. Days rested at home because of illness during one month were 0.7 days per interviewee and 8days per patient and it accounts for 2,161 days for the total productive population in the area. (Table 20) 2. In a year The incidence rate of medical care problems during a year was 74.8%, among them health problems which required rest at home was 37 percent. Estimated number of patients in the total population during a year was 4,600. The health problems that occured most frequently among the interviewees during a year were: Cold (30%), GI trouble (18), respiratory disease (11), anemia (10), diarrhea (10), neuralgia (10), parasite disease (9), ENT (7), skin (7), headache (7), trauma (4), communicable disease (3), and circulatory disease (3) -in that order. The rate of health problems by age groups was highest in the infants group, thereafter the rate decreased gradually until the age 15-19 year age group which showed the lowest, and then the rate increased gradually with aging. Eighty-seven percent of health problems during a year were solved by primary medical care. Thirteen percent of them needed secondary medical care procedures. Days rested at home because of illness during a year were 16 days per interviewee and 44 days per patient and it accounted for 57,335 days lost among productive age group in the area (Table 21). Among those given medical examination, the conditions observed most frequently were respiratory disease, GI trouble, parasite disease, neuralgia, skin disease, trauma, tuberculosis, anemia, chronic obstructive lung disease, eye disorders-in that order (Table 22). The main health problems required secondary medical care are as fellows: (previous page). Utilization of medical care (treatment) The rate of treatment by various medical facilities for all health problems during one month was 73 percent. The rate of receiving of medical care of those who have health problems which required rest at home was 52% while the rate of those who have health problems which did not required rest was 61 percent (Table 23). The rate of receiving of medical care for all health problems during a year was 67 percent. The rate of receiving of medical care of those who have health problems which required rest at home was 82 percent while the rate of those who have health problems which did not required rest was as low as 53 percent (Table 24). Types of medical facilitied used were as follows: Hospital and clinics: 32-35% Herb clinics: 9-10% Drugstore: 53-58% Hospitalization Rate of hospitalization was 1.7% and the estimate number of hospitalizations among the total population during a year will be 107 persons (Table 25). Medical cost: Average medical cost per person during one month and a year were 171 and 2,800 won respectively. Average medical cost per patient during one month and a year were 1,109 and 3,740 won respectively. Average cost per household during a year was 15,800 won (Table 26, 27). Solution measures for health and medical care problems in rural area: A. Health problems which could be solved by paramedical workers such as nurses, midwives and aid nurses etc. are as follows: 1. Improvement of environmental sanitation 2. MCH except medical care problems 3. Family planning except surgical intervention 4. Tuberculosis control except diagnosis and prescription 5. Dental care except operational intervention 6. Health education for residents for improvement of utilization of medical facilities and early diagnosis etc. B. Medical care problems 1. Eighty-five percent of health problems could be solved by primary care procedures by general practitioners. 2. Fifteen percent of health problems need secondary medical procedures by a specialist. C. Medical cost Concidering the economic situation in rural area the amount of 2,062 won per residents during a year will be burdensome, so financial assistance is needed gorvernment to solve health and medical care problems for rural people.