• 전자통신동향분석
• /
• 제37권4호
• /
• pp.11-18
• /
• 2022

Sharing vehicle data among the companies within a car ecosystem can improve driving experience, increase driver comfort, contribute to social goals such as improving road safety and lowering fuel consumption. Furthermore, by participating in the ecosystem, companies can secure long-term and sustainable new revenue-generating opportunities. In this paper, we will examine the bottleneck and success factors of data sharing, as well as the technological solutions that urgently require development for car data sharing.

• 한국농공학회논문집
• /
• 제49권1호
• /
• pp.23-33
• /
• 2007

Classification results of rural villages provide useful information about rural village characteristics to select similar villages in rural development project; many researches about regional classification have been practiced. Recently rural amenity was introduced as an alternative for rural development, and rural villages have been surveyed to find potential resources for rural development by 'Rural Amenity Resources Survey Project'. Accumulated information through this survey project could be used to classify rural villages. However existing rural classification method using statistical data is not efficient method to use rural amenity resources information described with text. We introduced Information Bottleneck Method (IBM) based on information theory and implemented this method to classification with rural amenity resources information of Yanggang-myen, Yeongdong-gun in Chungbuk province.

• 게임&엔터테인먼트 논문지
• /
• 제2권1호
• /
• pp.8-16
• /
• 2006

인터넷에서 게임 트래픽과 같은 대용량 데이터의 부하를 분산하고 안정적인 전송을 위해 멀티캐스트 라우팅 프로토콜을 사용한다. 다양한 멀티캐스트 알고리즘 중 최근 CBT(Core Based Tree) 방식이 널리 사용되고 있으나 코어 라우터로 트래픽 집중되는 병목현상과 코어라우터의 위치에 따라 푸어 코어(Poor core)현상이 발생한다. 본 논문에서는 코어 라우터의 병목현상을 초래하는 링크 레이트(Link Rate)에 따라 코어 라우터의 상태를 SS(Steady State), NS(Normal State), BS(Bottleneck State)로 구분하였으며, 코어 라우터의 과부하에 따라 멀티캐스트 라우팅 전략을 CBT에서 Anycast로 전환하는 방식을 제안하였다. 온라인 게임에서 교환되는 주요 패킷의 크기에 준하여 두 가지 라우팅 방식을 비교하고 트래픽의 증가에 따라 Anycast 라우팅 방식의 성능개선을 보였다.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.47-57
• /
• 1995

Rice Processing Complex(RPC) have being constructed with a rice mill plant and a facility of drying and storage to overcome problems caused by UR and to produce good quality of rice. An optimal design of a rice mill plant was required to successfully construct and operate it. The development of a simulation model was essential to the design of a rice mill plant. So, all the objectives of this study were to develop a simulation model for the design of a rice mill plant and to develop and evaluate the rice mill system. In this study the simulation model was developed to design a rice mill plant using SLAMSYSTEM, one of simulation languages. The results of this study were as followings. 1. A simulation model was developed with SLAMSYSTEM to represent the processes of a rice mill plant. The simulation model was used to design a rice mill pilot plant with the capacity of 0.5 ton per hour. The rice mill pilot plant was analyzed by the model with alternatives. 2. In the simulation the rice mill system was much influenced by the separating efficiency of a brown rice separator. Especially, the bottleneck of grain flow occurred at the buffer tank for brown rica. separator under 50% separating efficiency of brown rice separator. Hence, as the alternative simulation was conducted under 60% , 70% separating efficiency of brown rice separator, the bottleneck of the system could be minimized at the 60% separating efficiency of brown rice separator. 3. In the alternative simulation the bottleneck of the system was minimized under the hulling capacity of 1 t/h and 60% separating efficiency of brown rice separator with the capacity of 1 t/h. Under such a condition the max. weight of waiting entities at buffer tanks was less 250kg. So, the capacities of the buffer tanks were determined in the basis of simulation results. 4. The milled rice recovery and head rice recovery of the milling system were 74% and 92% in the simulation, respectively. These results of simulation almost corresponded to those of actual rice mill plants. The developed simulation model could be well applied to design a rice mill plant.

• 한국CDE학회논문집
• /
• 제12권3호
• /
• pp.182-192
• /
• 2007

The reduction of product development time is exposed to the competitive pressure due to shortened product-and production technology lifecycles as well as increasingly dynamic markets. Specially in automobile companies, that is of major importance for designing die because it is a bottleneck process in the development of a new car. To improve this conventional design process, this paper describes how to design it fast and flexibly. This was done by a modular method using standard template and a feature and knowledge based design method along the design process.

• International Journal of Aerospace System Engineering
• /
• 제1권1호
• /
• pp.44-47
• /
• 2014

This study proposes a development for the nano silver adhesive, which is applicable to high efficiency LED(light-emitting diode) light. The important issue of LED light is heat exhaust from LED. Generally, the middle area of LED light is increased up to 380K. Therefore, the bottleneck between LED chip and heat sink are caused by high temperature. In this work, the adhesive material between LED Chip and heat sink was newly developed for improvement of bottleneck. The nano silver was adopted to solve heat problem of chip on board package for LED light. In order to evaluate the performance of the nano silver adhesive, the thermal analysis was performed. Moreover both adhesive performance and heat exhaust were verified through the prototype test. From the experimental test results, it is found that the developed nano silver adhesive has the high performance.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 추계학술논문발표회 논문집
• /
• pp.158-163
• /
• 2007

• 기술혁신연구
• /
• 제13권1호
• /
• pp.213-246
• /
• 2005

Despite of the impressive progress made in the Evolutionary techno-economics during the last two decades, there have been very little, if not at all, theoretical advancement in explaining an endogenous mechanism of transforming a technological paradigm within self-perpetuatingstructural dynamics. The question poorly attempted was raised by Schumpeter a century ago in his effort to overcome the well-known 'Walras' trap'. Although there have been increasing number of researchers recently tackling the issue quite seriously from within the Evolutionary school, I see it that radical reconstruction of the basic principle of Evolutionary research framework is urgently needed to solve the century long fundamental question, from evolutionary approach to transformational approach. In the paper, I will show the theoretical feasibility of explaining an endogenous mechanism of paradigm transformation, relying upon the concept of localized dynamics and the concept of morphogenetic structuration. It should be emphasized that there must be aendogenous process of deepening structural Instability generated in the process of economic coordination to secure efficient circular flow. The concept of development bottleneck initiated by the Baumol's cost disease could be regarded as one of the important source of such mechanism. Unfortunately, however, it is a brief conceptual description presented in the paper rather than a comprehensive analytical model, due to the space limitation imposed.

• 전기전자학회논문지
• /
• 제25권3호
• /
• pp.493-500
• /
• 2021

본 논문에서는 다각형 용기의 품질 향상을 위한 딥러닝 구조 개발을 제안한다. 딥러닝 구조는 convolution 층, bottleneck 층, fully connect 층, softmax 층 등으로 구성된다. Convolution 층은 입력 이미지 또는 이전 층의 특징 이미지를 여러 특징 필터와 convolution 3x3 연산하여 특징 이미지를 얻어 내는 층이다. Bottleneck 층은 convolution 층을 통해 추출된 특징 이미지상의 특징들 중에서 최적의 특징들만 선별하여 convolution 1x1 ReLU로 채널을 감소시키고convolution 3x3 ReLU를 실시한다. Bottleneck 층을 거친 후에 수행되는 global average pooling 연산과정은 convolution 층을 통해 추출된 특징 이미지의 특징들 중에서 최적의 특징들만 선별하여 특징 이미지의 크기를 감소시킨다. Fully connect 층은 6개의 fully connect layer를 거쳐 출력 데이터가 산출된다. Softmax 층은 입력층 노드의 값과 연산을 진행하려는 목표 노드 사이의 가중치와 곱을 하여 합하고 활성화 함수를 통해 0~1 사이의 값으로 변환한다. 학습이 완료된 후에 인식 과정에서는 학습 과정과 마찬가지로 카메라를 이용한 이미지 획득, 측정 위치 검출, 딥러닝을 활용한 비원형 유리병 분류 등을 수행하여 비원형 유리병을 분류한다. 제안된 다각형 용기의 품질 향상을 위한 딥러닝 구조의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과, 양품/불량 판별 정확도 99%로 세계최고 수준과 동일한 수준으로 산출되었다. 검사 소요 시간은 평균 1.7초로 비원형 머신비전 시스템을 사용하는 생산 공정의 가동 시간 기준 내로 산출되었다. 따라서 본 본문에서 제안한 다각형 용기의 품질 향상을 위한 딥러닝 구조의 성능의 그 효용성이 입증되었다.

• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.337-348
• /
• 2015

This research introduces the Financial Effect Measurement (FEM) models which measures both the improvement and the innovation performance of Quality Control Circle (QCC) and activities of Six Sigma. Concepts and principle of Comprehensive Income Statement (CIS), Balanced Scorecard (BSC), Time-Driven Activity Based-Costing (TDABC) and Total Productive Maintenance (TPM) are applied in order to develop the 4 FEM models presented in this paper. First of all, FEM using CIS depicts the improvement effects of production capacity and yield using relationships between demand and supply, and line balancing efficiency between bottleneck process and non-bottleneck processes. Secondly, cause-and-effect relation of Key Performance Indicator (KPI) is used to present Critical Success Factor (CSF) effects for QC Story 15 steps of QCC and DMAIC (Define, Measure, Analyze, Improve, and Control) of Six Sigma. The next is FEM model for service management innovation activities that uses TDABC to calculate the time-driven effect for improving the indirect activities according to the cost object. Lastly, FEM model for TPM activities presents the interpretation of improvement effect model of TPM Capital Expenditure (CAPEX) and Operating Expenditure (OPEX) maintenance using profit, cash and Economic Added Value (EVA) as metrics of enterprise values. To better understand and further investigate FEMs, recent cases on National Quality Circle Contest are used to evaluate new financial effect measurement developed in this paper.